Matériels |
Modules |
Paramètres |
Seagate ST0x |
seagate.o |
controller_type=1 base_address=base_addr irq=irq |
F. Domain TMC-8xx |
seagate.o |
controller_type=2 base_address=base_addr irq=irq |
F. Domain TMC-3260 |
fdomain.o |
setup_called=1 port_base=base_addr interrupt_level=irq |
AHA-2920 |
fdomain.o |
setup_called=1 port_base=base_addr interrupt_level=irq |
Trantor T128 |
t128.o |
t128=base_addr,irq |
NCR-5380 Based |
g_NCR5380.o |
ncr5380=port,irq,dma_channel |
AHA 152x |
aha152x.o |
aha152x=port,irq,scsi_id,reconnect,parity |
AHA 1542 |
aha1542.o |
bases=base_addr |
Buslogic |
BusLogic.o |
buslogic=base_addr |
PAS-16 SCSI |
pas16.o |
pas16=port,irq |
Zip Parallel Port |
ppa.o |
ppa_base=base_addr |
Always In2000 |
in2000.o |
setup_string="ioport:base_addr noreset nosync:x period:ns disconnect:x debug:x proc:x" |
Exemples :
Configuration |
Exemples |
Adaptec AHA1522, port 330, IRQ 11, SCSI ID 7 |
aha152x=0x330,11,7 |
Adaptec AHA1542, port 330 |
bases=0x330 |
Future Domain TMC-800, CA000, IRQ 10 |
controller_type=2 base_address=0xca000 irq=10 |
Lorsqu'un paramètre contient des virgules, assurez vous qu'aucun espace ne suive la virgule.