DrakX - en to unknown language translation catalogue (2209 entries)

en: 		 user name: %s
    		 on path: %s
target: 		 korisničko ime: %s
    		 na putanji: %s

en: 	-Hard drive.
target: 	-Hard disk.

en: 	-Network by FTP.
target: 	-Mreža preko FTP.

en: 	-Network by SSH.
target: 	-Mreža preko SSH.

en: 	-Network by rsync.
target: 	-Mreža preko rsync.

en: 	-Network by webdav.
target: 	-Mreža preko webdav.

en: 	-Tape
target: 	-Traka

en: 	Backups use tar and bzip2
target: 	Backup koristi tar i bzip2

en: 	Backups use tar and gzip
target: 	Backus koristi tar i gzip

en: 	Do not include System Files
target: 	Ne uključuj Sistemske Fajlove

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
target: 
    
    
    Napomena: ukoliko iamte ISA PnP zvučnu karticu, moraćete da koristite sndconfig program.  Samo ukucajte "sndconfig" u konzoli.

en: 
    
    
    We are now going to configure the %s connection.
    
    
    Press OK to continue.
target: 
    
    
    Sada treba da podesimo %s konekciju.
    
    
    Pritisnite "U redu" za nastavak.

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
target: 
    
     Hvala:
    	- LTSP Projekat http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
target: 
    
    (UPOZORENJE! Vi koristite XFS za vašu root particiju,
    pa kreiranje startnog 1.44 Mb flopija verovatno neće uspeti,
    zato što XFS traži veliki drajver).

en: 
    
    To submit a bug report, click on the button report.
    This will open  a web browser window  on https://drakbug.mandrakesoft.com
     where you'll find a form to fill in.The information displayed above will be 
    transferred to that server
target: 
    
    Da bi prijavili bag, kliknite na taster prijava.
    Ovo će otvoriti prozor web pretraživača sa adresom https://drakbug.mandrakesoft.com
     gde će te pronaći formular koji treba da popunite.Informacija koja je gore prokazana će biti 
    prebačena na taj server

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
target: 
    
    Vaša kartica trenutno koristi %s"%s" drajver (default drajver za vašu karticu je "%s")

en: 
                          DrakBackup Daemon Report
target: 
                          DrakBackup Daemon Izveštaj

en: 
                          DrakBackup Report
target: 
                          DrakBackup Izveštaj

en: 
                        DrakBackup Report Details
target: 
                        DrakBackup Detalji Izveštaja

en: 
     Copyright (C) 2002 by MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com
target: 
     Sva prava (C) 2002 MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
target: 
     Problemi sa FTP konekcijom: Nije moguće poslati vaše backup fajlove preko FTP.

en: 
     Some errors during sendmail are caused by 
     a bad configuration of postfix. To solve it you have to
     set myhostname or mydomain in /etc/postfix/main.cf
target: 
     Neke greške tokom sendmail-a su uzrokovane 
     lošom konfiguracijom postfix-a. Da bi ih rešili morate da
     podesite myhostname ili mydomain u /etc/postfix/main.cf

en: 
    - Burn to CD
target: 
    - Nareži na CD

en: 
    - Daemon (%s) include:
target: 
    - Demonn (%s) uključuje :

en: 
    - Delete hard drive tar files after backup.
target: 
    - Obrišite tar fajlove na hard disku posle backup-a.

en: 
    - Options:
target: 
    - Opcije:

en: 
    - Other Files:
target: 
    - Ostali fajlovi:

en: 
    - Save on Hard drive on path: %s
target: 
    - Snimi na Hard Disk na putanju: %s

en: 
    - Save to Tape on device: %s
target: 
    - Snimi na traku na uređaju: %s

en: 
    - Save via %s on host: %s
target: 
    - Snimi preko %s na host: %s

en: 
    - System Files:
target: 
    - Sistemski fajlovi:

en: 
    - User Files:
target: 
    - Korisnički fajlovi:

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
target: 
    Takođe, štampači konfigurisani sa PPD fajlovima koji potiču od proizvođača ili sa osnovnim CUPS drajverima ne mogu biti prebačeni.

en: 
    Backup Sources:
target: 
    Backup Izvori:

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
target: 
    Čestitamo, baš štampač je sada instaliran i podešen!
    
    Možete da štampate koristeći "Štampaj" komandu u vašoj aplikaciji (obično u "Fajl" meniju).
    
    Ukoliko želite da dodate, uklonite ili promenite ime štampaču, ili želite da promenite default opcije (papir, kvalitet štampanja, ...), izaberite "Štampač" u "Hardver" sekciji Mandrake Kontrolnog Centra.

en: 
    Drakbackup activities via %s:
target: 
    Drakbackup aktivnosti preko %s:

en: 
    Drakbackup activities via CD:
target: 
    Drakbackup aktivnosti preko CD:

en: 
    Drakbackup activities via tape:
target: 
    Drakbackup aktivnosti preko trake:

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
target: 
    Ukoliko imate ISA karticu, vrednosti na sledećem ekranu bi trebale biti ispravne.
    
    Ukoliko imate PCMCIA karticu, morate znati  irq i  io za vašu karticu.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
target: 
    Označite štampače koje želite da prebacite i kliknite na 
    "Prebaci".

en: 
    Please check all options that you need.
target: 
    Proverite sve opcije koje vam trebaju.

en: 
    Restore Backup Problems:
    
    During the restore step, Drakbackup will verify all your
    backup files before restoring them.
    Before the restore, Drakbackup will remove 
    your original directory, and you will loose all your 
    data. It is important to be careful and not modify the 
    backup data files by hand.
target: 
    Problemi pri obnavljanju:
    
    Tokom procesa obnavljanja, Drakbackup će proveriti sve vaše 
    backup fajlovi pre nego ih obnovi.
    Pre obnavljanja, Drakbackup će ukloniti 
    vaš orginalni direktorijum, i izgubićete sve 
    podatke. Važno je da budete pažljivi i da nemenjate 
    backup fajlove ručno.

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
target: 
    Izaberite temu za
    lilo i bootsplash,
    a možete ih odabrati
    odvojeno

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komande "%s" i "%s" takođe omogućavaju izmenu opcija za konkretni posao štampanja. Jednostavno dodajte željene opcije u komandnu liniju, e. g. "%s <fajl>".

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komanda "%s" takođe dozvoljava izmenu opcija za konkretni posao štampanja. Jednostavno dodajte željene ocije u komandnu liniju, e. g. "%s <fajl>".

en: 
    There are %d unknown printers directly connected to your system
target: 
    Prisutno je %d nepoznatih štampača povezanih na vaš sistem

en: 
    There is one unknown printer directly connected to your system
target: 
    Postoji jedan nepoznati štamač koje je direktno povezan an vaš sistem

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
target: 
    Ovo je specijalna Bootstrap
    particija i koristi se
    dual-booting vašeg sistema.

en: 
    Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]
target: 
    Upotreba: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
target: 
    Upozorenje !
    
    Pažljivo pročitajte dole navedene uslove. Ukoliko se ne slažete sa bilo kojim 
    delom, onda nemate odobrenje za instaliranje sledećeg CD-a. Pritisnite 'Odbijam' 
    da bi nastavili instalaciju bez upotrebe tih CD medija.
    
    
    Neke komponente sadržane u sledećim CD medijama nisu pod
    GPL Licencom ili sličnim ugovorima. Svaka takva komponenta je onda uslovljena
    uslovima i ugovorima sopstevene lincence. 
    Pažljivo pročitajte i upoznajte se sa takvim specifičnim licencama pre 
    nego uotrebite ili redistribuirate pomenute komponente. 
    Takve licence će u glavnom zabranjivati transfer, kopiranje 
    (osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, 
    rastavljanje, de-kompajliranje ili menjanje komponenti. 
    Bilo koji deo ugovora koji nije ispoštovan istovremeno uklanja i ostala vaša prava
    u datoj licenci. Ukoliko vam određena licenca ne garantuje takva
    prava, obično ne možete instalirati programe na više od jedanog
    aiatema, ili ih prilagoditi da se mogu koristiti na mreži. Ukoliko ste u dilemi, molimo vas da direktno 
    kontaktirate distributera ili editora komponente. 
    Prenos na treće programe ili kopiranje takvih komponenti uključujući i
    dokumentaciju je obično zabranjen.
    
    
    Sva prava na komponente na sledećim CD medijama pripadaju njihovim 
    respektativnim autorima i zaštićene su zakonima o intelektuanoj svojini i 
    pravima koji se primenjuju na softverske programe.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
target: 
    Dobrodošli u Čarobnjak za konfigurisanje štampača
    
    Ovaj čarobnjak će vam omogućiti da instalirate lokalne ili udaljene štampače sa ovemašine kao i drugih mašina na mreži.
    
    Od vas će biti tražene sve neophodne informacije za podešavanje štampača a dobićete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima konekcije štampača.

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
target: 
    Doborodošli.
    
    Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo

en: 
    You can connect to the Internet or reconfigure your connection.
target: 
    Sada se možete konektovati na Internet ili rekonfigurisati konekciju

en: 
    You can disconnect or reconfigure your connection.
target: 
    Možete se diskonektovati ili rekonfigurisati konekciju.

en: 
    You can reconfigure your connection.
target: 
    Podesi internet konfiguraciju

en:           All of your selected data have been
target:           Svi vaši odabrani podasi su

en:           Successfuly Restored on %s
target:           Uspešno Obnovljeni na %s

en:          Restore Configuration
target:         Obnavljanje Konfiguracije

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
target: <Tab>/<Alt-Tab> kret. između elemenata | <Space> izbor | <F12> sledeći ekran

en:   Transfer  
    Now
target:   Prebaci  
    Sada

en:  (Default)
target:  (Podrazumevano)

en:  (Make sure that all your printers are connected and turned on).
target:  (Proverite da li su svi štampači povezani i uključeni).

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target:  (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/lp1, ...).

en:  (driver %s)
target: (drajver %s)

en:  (multi-session)
target:  (multi-sesija)

en:  Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\@epita.fr>
target:  Sva prava (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\@epita.fr>

en:  Erase Now
target: Obriši odmah

en:  Error while sending mail.
target:  Greška tokom slanja mail-a.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
target: Ukoliko je željeni štampač auto-detektovan, jednostavno ga izaberite sa liste a zatim dodajte korisničko ime, lozinku, i/ili radnu grupu ukoliko je potrebno.

en:  enter `void' for void entry
target:  unesite `void' za void unos

en:  on LPD server "%s", printer "%s"
target: na LPD serveru "%s", štampač "%s"

en:  on Novell server "%s", printer "%s"
target: na Novell serveru "%s", štampač "%s"

en:  on SMB/Windows server "%s", share "%s"
target: na Windows serveru "%s", deljeni "%s"

en:  on device: %s
target:  na uređaj: %s

en:  on parallel port \#%s
target:  na parelelnom portu \#%s

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
target: !!! Ukazuje da je lozinka u sistemskoj bazi podataka različita
    od one u bazi terminalnog Servera.
    Obrišite/ponovo dodajte korisnika na Terminalnom Serveru da bi omoućili prijavljivanje.

en: "%s" based winmodem detected, do you want to install needed software ?
target: "%s" badzirani win modem je detektovan, da li želite da instalirate potreban softver ?

en: "Menu" key
target: "Meni" taster

en: %d comma separated numbers
target: %d odvojeni brojevi sa zarezom

en: %d comma separated strings
target: %d odovojeni stringovi sa zarezom

en: %d minutes
target: %d minuta

en: %d packages
target: %d paketa

en: %d seconds
target: %d sekundi

en: %s BootSplash (%s) preview
target: %s BootSplash (%s) pregled

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
target: %s postoji, da ga obrišem?
    
    Upozorenje: Ukoliko ste već završili ovaj proces verovatno treba da
    očistite unos sa authorized_keys na serveru.

en: %s formatting of %s failed
target: %s Formatiranje  %s nije uspelo

en: %s is not in the scanner database, configure it manually?
target: %s se ne nalazi u bazi podataka za skenere, da li želite da ga ručno podesite?

en: %s not responding
target: %s ne odgovara

en: (This) DHCP Server IP
target: (Ovaj) DHCP server IP

en: (already added %s)
target: (%s već postoji)

en: (module %s)
target: (modul %s)

en: (on %s)
target: (na %s)

en: (on this machine)
target: (na ovoj mašini)

en: , %s sectors
target: , %s sektora

en: , USB printer \#%s
target: , USB štampač \#%s

en: , multi-function device
target: , multi-funkcionalni uređaj

en: , multi-function device on HP JetDirect
target: , multi-fuunkcionalni uređaj na HP JetDirect

en: , multi-function device on USB
target: , multi-funkcionalni uređaj na USB

en: , multi-function device on parallel port \#%s
target: , multi-funkcionalni uređaj na paralelnom portu \#%s

en: , network printer "%s", port %s
target: , mrežni štampač "%s", port %s

en: , printer "%s" on SMB/Windows server "%s"
target: , štampač "%s" na SMB/Windows serveru "%s"

en: , printer "%s" on server "%s"
target: , štampač "%s" na serveru "%s"

en: , printing to %s
target: , štampaj na %s

en: , using command %s
target: , koristim komandu %s

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
target: - pci uređaji: ovo nam daje PCI slot, uređaj i funkciju za ovu karticu
    - eide uređaji: uređaj je ili slave ili master
    - scsi uređaji: scsi bus i id scsi uređaja

en: /Autodetect _jazz drives
target: /Autodetekcija _jazz uređaja

en: /Autodetect _modems
target: /Autodetekcija _modema

en: /Autodetect _printers
target: /Autodetekcija _štampača

en: /File/-
target: /Fajl/-

en: /File/Save _As
target: /Datoteka/Snimi _Kao

en: /File/_New
target: /Datoteka/_Nova

en: /File/_Open
target: /Datoteka/_Otvori

en: /File/_Quit
target: /Fajl/_Kraj

en: /File/_Save
target: /Datoteka/_Snimi

en: /Help/_About...
target: /Pomoć/_O...

en: /Options/Test
target: /Opcije/Test

en: /_About...
target: /_O...

en: /_File
target: /_Fajl

en: /_Help
target: /_Pomoć

en: /_Options
target: /_Opcije

en: /_Quit
target: /_Kraj

en: /_Report Bug
target: /_Prijavite Bag

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
target: /etc/hosts.allow i /etc/hosts.deny je već podešen - nije izmenjen

en: 1 button
target: 1 taster

en: 1 minute
target: 1 minut

en: 16 million colors (24 bits)
target: 16 miliona boja (24-bitna paleta)

en: 2 buttons
target: 2 tastera

en: 256 colors (8 bits)
target: 256 boja (8-bitna paleta)

en: 3 buttons
target: 3 tastera

en: 32 thousand colors (15 bits)
target: 32 hiljade boja (15-bitna paleta)

en: 4 billion colors (32 bits)
target: 4 milijarde boja (32-bitna paleta)

en: 64 MB or more
target: 64 MB ili više

en: 65 thousand colors (16 bits)
target: 65 hiljada boja (16-bitna paleta)

en: <- Previous
target: <- Prethodni

en: <-- Del User
target: <-- Obriši Korisnika

en: <-- Delete
target: <-- Obriši

en: <-- Edit Client
target: Uredi Klijenta

en: => Notice, a label changed:
    %s
target: => Napomena, promenjeno ime:
    %s

en: => There are many things to choose from (%s).
target: => Postoji mnogo stvari za izbor iz (%s).

en: A command line must be entered!
target: Komandna linija mora biti uneta!

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
target: Startni disk obezbeđuje način podizanja vašeg Linux sistema bez zavisnosti
    od normalnog startera. Ovo je korisno ako ne želite da instalirate
    LILO(ili grub) na vaš sistem, ako drugi operativni sistem ukloni LILO, ili LILO ne
    radi sa vašim hardverom. Startni disk možete koristiti sa Mandrake Linux
    'diskom za spasavanje', što olakšava oporavak u slučaju teže havarije.
    Da li biste da kreirate startnu disketu za vaš sistem? %s

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
target: Startni disk obezbeđuje način podizanja vašeg Linux sistema bez zavisnosti
    od normalnog startera. Ovo je korisno ako ne želite da instalirate
    SILO(ili grub) na vaš sistem, ako drugi operativni sistem ukloni SILO, ili SILO ne
    radi sa vašim hardverom. Startni disk možete koristiti sa Mandrake Linux
    'diskom za spasavanje', što olakšava oporavak u slučaju teže havarije.
    Ukoliko želite da kreirate startnu disketu za vaš sistemubacite disketu u pogon i pritisnite "Da".

en: A graphical environment with user-friendly set of applications and desktop tools
target: Grafička okruženja za setom korisničkNFS server, SMB server, Proxy serverNFS server, SMB server, Proxy serverih aplikacija i desktopalata

en: A library which defends against buffer overflow and format string attacks.
target: Biblioteka koja štiti od buffer overflow-a i format string napada.

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
target: Štampač "%s" već postoji pod  %s. 
    Klikni na "Prebaci" da bi prešli preko starog.
    Možete ukucati i novo ime ili preskočiti ovaj štampač.

en: A problem occured while restarting the network: 
    
    %s
target: Pojavio se problem tokom restartovanja mreže?
    %s

en: A tool to monitor your logs
target: Alat za pregledanje log datoteka

en: A valid URI must be entered!
target: Morate uneti validan URI!

en: ADSL connection
target: ADSL konekcija

en: ALL existing partitions and their data will be lost on drive %s
target: SVE postojeće particije i podaci na disku %s će biti izgubljeni

en: Abort
target: Prekini

en: About Harddrake
target: O Harddrake-u

en: Accept
target: Prihvati

en: Accept user
target: Prihvati korisnika

en: Account Login (user name)
target: Logovanje za račun (korisničko ime)

en: Account Password
target: Lozinka za račun

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
target: Aktiviranje i deaktiviranje svih mrežnih interfejsa konfigurisanih za start 
    pri podizanju sistema.

en: Add
target: Dodaj

en: Add Client -->
target: Dodaj Klijenta -->

en: Add User -->
target: Dodaj Korisnika -->

en: Add a module
target: Dodaj modul

en: Add a new printer
target: Dodajte novi štampač

en: Add a new rule at the end
target: Dodaj novo pravilo na kraju

en: Add a user
target: Dodaj korisnika

en: Add an item
target: Dodaj vrednost

en: Add host/network
target: Dodaj hosa/mrežu

en: Add this printer to Star Office/OpenOffice.org/GIMP
target: Dodaj ovaj štampač u Star Office/OpenOffice.org/GIMP

en: Add to LVM
target: Dodaj na LVM

en: Add to RAID
target: Dodaj na RAID

en: Add user
target: Dodaj korisnika

en: Add/Del Clients
target: Dodaj/Izbriši Klijente

en: Add/Del Users
target: Dodaj/Izbriši Korisnike

en: Adding printer to Star Office/OpenOffice.org/GIMP
target: Dodajem štampač u Star Office/OpenOffice.org/GIMP

en: Advanced
target: Napredno

en: Advanced Configuration
target: Napredna Konfiguracija

en: Advanced Options
target: Napredne opcije

en: Afghanistan
target: Avganistan

en: After changing type of partition %s, all data on this partition will be lost
target: Posle promene tipa particije %s, svi podaci na ovoj particiji će biti izbrisani

en: After formatting partition %s, all data on this partition will be lost
target: Posle formatiranja particije %s,svi podaci na ovoj particiji će biti izbrisani

en: After resizing partition %s, all data on this partition will be lost
target: Posle promene veličine %s particije svi podaci će biti izbrisani

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
target: Kada se to uradi, trebali bi da restartujete X
    okruženje da bi izbegli probleme sa promenom hostname-a.

en: Albania
target: Albanija

en: Albanian
target: Albanski

en: Algeria
target: Alžir

en: All
target: Sve

en: All data on this partition should be backed-up
target: Cvi podaci na ovoj particiji bi trebali biti sačuvani

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
target: Sva pitanja će biti praćena od strane jednog kvalifikovanog MandrakeSoft tehničkog eksperta.

en: All primary partitions are used
target: Sve primarne particije su zauzete

en: Allow Thin Clients
target: Dozvoli Thin Klijente

en: Allow all users
target: Dozvoli sve korisnike

en: Alt and Shift keys simultaneously
target: Alt i Shift tasteri istovremeno

en: Alternative drivers
target: Alternativni drajveri

en: Alternative test page (A4)
target: Alteernativna test stranica (A4)

en: Alternative test page (Letter)
target: Alternativna test stranica

en: American Samoa
target: Američka Samoa

en: Amusement programs: arcade, boards, strategy, etc
target: Zabavni programi: arkade, ige na tabli, strategije, itd

en: An error occurred
target: Xm,pojavila se greška

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
target: Dogodila se greška - nije nađen ispravan uređaj na kojem bi bili krerani novi datotečnog sistemi. Proverite vaš hardver da vidite šta je uzrok ovog problema.

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
target: Greška, ali neznam kako da je razrešim.
    Nastavite na vaš rizik!

en: An error occurred:
    %s
    Try to change some parameters
target: pojavila se greška:
    %s
    Pokušajte da promenite neke od parametara

en: An online platform to respond to company's specific support needs
target: Tu je online platforma koja treba da odgovori poebnim i specifičnim potrebama kompanija

en: Anacron is a periodic command scheduler.
target: Anacron -  podesite period.komande

en: Andorra
target: Andora

en: Anguilla
target: Anigla

en: Another one
target: Još jedan

en: Antarctica
target: Antartik

en: Antigua and Barbuda
target: Antigva i Barbuda

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
target: Apache je  WWW server. On se koristi da opslužuje  HTML fajlove
    i CGI.

en: Append
target: Dodatak

en: Application:
target: Aplikacija:

en: Apply
target: Promeni

en: Are you sure that you want to set up printing on this machine?
target: Da li ste sigurni da želite da podesite štampanje na ovoj mašini?

en: Area:
target: Područje :

en: Armenia
target: Jermenija

en: Armenian (old)
target: Jermenski (stari)

en: Armenian (phonetic)
target: Jermenski (fonetski)

en: Armenian (typewriter)
target: Jermenski (typewriter)

en: Audio-related tools: mp3 or midi players, mixers, etc
target: Audio alati: mp3 ili midi plejeri,mikseri, itd

en: Australia
target: Australija

en: Australian Optus cable TV
target: Australijska Optus kablovska TV

en: Austria
target: Austrija

en: Authentication
target: Autentifikacija

en: Authentication LDAP
target: LDAP Autentifikacija

en: Authentication NIS
target: NIS Autentifikacija

en: Authentication Windows Domain
target: Autentifikacija Windows Domena

en: Author:
target: Autor:

en: Auto Install
target: Autoinstalacija

en: Auto Install Configurator
target: Autoinstalacioni konfigurator

en: Auto allocate
target: Auto dislociranje

en: Auto-detect
target: Auto-detekcija

en: Auto-detect printers connected directly to the local network
target: Auto-detekcija štampača povezanih direktno na lokalnu mrežu

en: Auto-detect printers connected to machines running Microsoft Windows
target: Auto-detekcija štampača konektovanih na mašine na kojima je instaliran Microsoft Windows

en: Auto-detect printers connected to this machine
target: Auto-detekcija štampača povezanih sa ovom mašinom

en: Auto-detected
target: Auto-detekcija

en: Autologin
target: Auto logovanje

en: Automated
target: Automatski

en: Automatic IP
target: Automatski IP

en: Automatic Steps Configuration
target: Podešavanje automatizovanih koraka

en: Automatic correction of CUPS configuration
target: Automatska korekcija CUPS konfiguracije

en: Automatic detection and configuration of hardware at boot.
target: Automatska detekcija i konfiguracija hardvera pri startanju sistema.

en: Automatic reconfiguration
target: Automatska rekonfiguracija

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
target: Automatska regeneracija kernelovog zaglavlja u /boot zar
    /usr/include/linux/{autoconf,version}.h

en: Automatic time synchronization (using NTP)
target: Automatska sinhronizacija vremena (preko NTP-a)

en: Automatically find available printers on remote machines
target: Automatski pronađi dostupne štampače na udaljenim mašinama

en: Automatically switch on numlock key locker under console
    and XFree at boot.
target: Automatski uključuje numlock taster pod konzolom
    i u XFree pri startanju.

en: Autoprobe
target: Automatska proba

en: Available printers
target: Dostupni štampači

en: Azerbaidjani (latin)
target: Azerbejdzan  (latinica)

en: Azerbaijan
target: Azerbejdžan

en: Backup Now
target: Backup Sad

en: Backup Now from configuration file
target: Backup-uj sada iz konfiguracionog fajla

en: Backup Other files...
target: backup-ovanje ostalih fajlova...

en: Backup User files...
target: backup-ovanje korsinikovih fajlova

en: Backup Users
target: Backup-uj Korisnike

en: Backup files are corrupted
target: Backup fajlovi su korumpirani

en: Backup files not found at %s.
target: Backup fajlvi nisu pronađeni na %s.

en: Backup other files
target: Backup-uj ostale fajlove

en: Backup system
target: Backup-uj sistem

en: Backup system files
target: Backup-uj sistemske fajlove

en: Backup system files...
target: Backup sistemskih fajlova...

en: Backup the system files before:
target: Backup sistemskih fajlova pre:

en: Backup user files
target: Backup-uj korisničke fajlove

en: Backup your System files. (/etc directory)
target: Sačuvajte svoje Sistemske fajlove ( /etc direktorijum )

en: Bad backup file
target: Loše backup-ovana datoteka

en: Bad choice, try again
target: Loš izbor, probajte ponovo

en: Bad package
target: Loš paket

en: Bad password on %s
target: Pogrešna lodzinka na %s

en: Bahamas
target: Bahami

en: Bahrain
target: Bahrein

en: Bangladesh
target: Bangladeš

en: Basic
target: Osnovno

en: Be careful: this operation is dangerous.
target: PAŽLJIVO,ova operacija je opasna.

en: Be sure a media is present for the device %s
target: Proverite da li je medij prisutan u uređaju %s

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
target: Zbog toga što radite mrežnu instalaciju, vaša mreža je već podešena podešena.
    Kliknite na  OK  zadrdžali konfiguraciju Network/Internet konekcije, ili cancel da bi ponovo uradili kofiguraciju.

en: Become a MandrakeExpert
target: Postanite MandrakeExpert

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
target: Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate i koristite na vašem sistemu.
    
    -Možete instalirati fontove na upoobičajeni način. U ređim slučajevimas, bagoviti fontovi mogu srušiti vaš X Server.

en: Belarus
target: Beolorusija

en: Belarusian
target: Beloruski

en: Belgian
target: Belgijski

en: Belgium
target: Belgija

en: Bengali
target: Bengalski

en: Bhutan
target: Butan

en: Bolivia
target: Bolivija

en: Books and Howto's on Linux and Free Software
target: Knjige i Kako? (Howto's) za Linux i Besplatni Softver

en: Boot Protocol
target: Startni(Boot) protokol

en: Boot Style Configuration
target: Konfiguracija stila startanja

en: Boot device
target: Startni (boot) uređaj

en: Bootloader
target: Starter

en: Bootloader installation
target: Instalacija startera

en: Bootloader main options
target: Glavne opcije startera

en: Bootloader to use
target: Starter koji će se koristiti

en: Bosnia and Herzegovina
target: Bosna i Hrecegovina

en: Bosnian
target: Bosanski

en: Both Shift keys simultaneously
target: Oba Shift tastera istovremeno

en: Botswana
target: Bocvana

en: Bouvet Island
target: Ostrva Buve

en: Brazilian (ABNT-2)
target: Brazilski (ABNT-2)

en: Bringing down the network
target: Odstupam od mreže

en: Bringing up the network
target: Pristupam  mrežu

en: British Indian Ocean Territory
target: Britanska Indijska Okeanska Teritorija

en: Broadcast Address:
target: Broadcast Adresa:

en: Browse
target: pretraži

en: Browse to new restore repository.
target: Pretražite novi restore repository.

en: Brunei Darussalam
target: Bruneji Darussalam

en: Build All Kernels -->
target: Kompajliraj Sve Kernele -->

en: Build Backup
target: Kreiraj backup

en: Build Whole Kernel -->
target: Kompajliraj celi Kernel -->

en: Build the disk
target: Kreiraj disk

en: Bulgaria
target: Bugarska

en: Bulgarian (BDS)
target: Bugarski (BDS)

en: Bulgarian (phonetic)
target: Bugarski (fonetski)

en: Bus identification
target: Identifikacija busa

en: Button 2 Emulation
target: Emulacija 2 tastera

en: Button 3 Emulation
target: EmulaciŮa 3 tastera

en: Button `%s': %s
target: Taster `%s': %s

en: Buttons emulation
target: Emulacija tastera

en: C and C++ development libraries, programs and include files
target: C i C++ razvojne biblioteke, programi  i propratne datoteke

en: CD in place - continue.
target: CD na mestu - nastavi.

en: CPU flags reported by the kernel
target: CPU zastave prijavljena od strane kernela

en: CUPS - Common Unix Printing System
target: CUPS - Opšti Unix-ov sistem za štampanje

en: CUPS configuration
target: CUPS konfiguracija

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
target: CUPS ne podržava štampače na Novell serverima ili štampačima koji šalju podatke u slobodno-formiranu komandu.

en: CUPS printer sharing configuration
target: CUPSkonfiguracija za deljenje štampača

en: Cable connection
target: Kablovska konekcija

en: Cache size
target: Veličina keša

en: Calendar
target: Kalendar

en: Cambodia
target: Kambodža

en: Cameroon
target: Kamerun

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
target: Ne mogu da pristupim kernel modulima koji odgovaraju vašem kernelu (fajl %s nmedostaje), što generalno znači da vaš boot floppy nije sinhronizaovan sa Instalacionim medijom (kreirajte noviji boot floppy)

en: Can't add a partition to _formatted_ RAID md%d
target: Nije moguće dodati particiju na _formatiran_ RAID md%d

en: Can't create catalog!
target: Ne mogu da kreiram katalog!

en: Can't find %s on %s
target: Ne mogu pronađem  %s na %s

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
target: Ne mogu da pokrenem mkinitrd -f /boot/initrd-%s.img %s.

en: Can't login using username %s (bad password?)
target: Ne mogu da ulogujem korisničko ime %s (neispravna lozinka?)

en: Can't make screenshots before partitioning
target: Ne mogu da napravim snimak pre particioniranja

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
target: Ne mogu da restartujem LiLo!
    Pokrenite "lilo" kao root iz komandne linije da bi završili instalciju teme za LiLo starter.

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
target: Demontiranje nije moguće,jer se particija korisiti za loop back.
    Prvo uklonite loopback

en: Can't use broadcast with no NIS domain
target: Nije moguć prenos bez NIS domena

en: Can't write /etc/sysconfig/bootsplash
    File not found.
target: Ne mogu da upišem u /etc/sysconfig/bootsplash
    Fajl ne postoji.

en: Can't write /etc/sysconfig/bootsplash.
target: Ne mogu da upisujem u /etc/sysconfig/bootsplash.

en: Canada
target: Kanada

en: Canada (cable)
target: Kanada (kabl)

en: Canadian (Quebec)
target: Kanadski (Kvebek)

en: Cancel
target: Poništi

en: Cape Verde
target: Kape Verde

en: CapsLock key
target: CapsLock taster

en: Card IO
target:  IO kartice

en: Card IO_0
target:  IO_0 kartice

en: Card IO_1
target: IO_1 kartice

en: Card IRQ
target: IRQ kartice

en: Card mem (DMA)
target: (DMA) kartice

en: Card model:
target: Model kartice :

en: Cayman Islands
target: Kajmanska Ostrva

en: Cd-Rom labeled "%s"
target: Cd-Rom označen kao "%s

en: Central African Republic
target: Centralno Afrička Republika

en: Certify yourself on Linux
target: Sertifikujte se na Linux-u

en: Chad
target: Čad

en: Change
    Restore Path
target: Promeni
    putanju za Obnavljanje

en: Change Cd-Rom
target: Promeni Cd-Rom

en: Change partition type
target: Promena tipa particije

en: Change the printing system
target: Promenite sistem za štampanje

en: Change type
target: Promena tipa

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
target: Promenite vaš Cd-Rom!
    
    Ubacite vaš CD označen sa "%s" u pogon i pritisnite "U redu" kada ste spremni.
    Ukoliko ga nemate pritisnite  Poništi.

en: Channel
target: Kanal

en: Check bad blocks?
target: Proveri loše blokove ?

en: Checking device and configuring HPOJ...
target: Proveravam uređaj i podešavam HPOJ...

en: Checking installed software...
target: Proveravam instalirani softver...

en: Checking your system...
target: Proveravam vaš sistem...

en: Chile
target: Čile

en: China
target: Kina

en: China (broadcast)
target: Kina (broadcast)

en: Choose a file
target: Izaberite fajl

en: Choose a mirror from which to get the packages
target: Izaberite mirror sa kog ćete skinuti pakete

en: Choose a monitor
target: Izaberite monitor

en: Choose a partition
target: Izaberite particiju

en: Choose action
target: Izaberite akciju

en: Choose an X server
target: Izaberite X server

en: Choose an existing LVM to add to
target: Izaberi postojeći LVM za dodavanje

en: Choose an existing RAID to add to
target: Izaberi postojeći RAID za dodavanje

en: Choose another partition
target: Izaberite drugu particiju

en: Choose color
target: Izaberite boju

en: Choose file
target: Izaberi datoteku

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
target: Izaberite jedan od auto-detektovanih štampača sa liste i unesite ime hosta ili IP i opcionalni broj porta (default je 9100) u polje za unos.

en: Choose packages to install
target: Paketi za instalaciju

en: Choose the applications that will support the fonts:
target: Izaberite aplikacije koje će podržavati fontove :

en: Choose the connection you want to configure
target: Izaberite tip konekcije koji želite da koristite

en: Choose the default user:
target: Izaberite default (osnovnog) korisnika:

en: Choose the floppy drive you want to use to make the bootdisk
target: Izabrerite disketni uređaj koji ćete koristiti  za kreiranje starne diskete

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on it will be lost
    and will not be recoverable!
target: Izaberite hard disk koji želite da izbrišete da bi instalirali novu Mandrake Linux 
    particiju. Budite pažljivi, svi podaci na njemu će biti izgubljeni
    i neće se moći povratiti!

en: Choose the mount points
target: Izaberite tačke montiranja

en: Choose the network interface
target: Izaberite mrežni interfejs

en: Choose the network or host on which the local printers should be made available:
target: Izaberite mrežu ili hosta na kojem bi lokalni štampači trebali biti dostupni:

en: Choose the new size
target: Izaberite novu veličinu

en: Choose the packages you want to install
target: Izaberi pakete za instalaciju

en: Choose the partitions you want to format
target: Izaberi particije za formatiranje

en: Choose the profile to configure
target: Izaberite profil za konfigurisanje

en: Choose the resolution and the color depth
target: Izaberite rezoluciju i broj boja pri prikazu

en: Choose the sizes
target: Izaberite veličinu

en: Choose the window manager to run:
target: Izaberite window menadzer koji želite da koristite:

en: Choose which services should be automatically started at boot time
target: Izaberite koje servisi treba automatski da se pokrenu pri startanju

en: Choose your country
target: Izaberi svoju zemlju

en: Choose your filesystem encryption key
target: Izaberite ključ za enkripciju fajl sistema

en: Choose your keyboard
target: Izaberi tastaturu

en: Christmas Island
target: Uskršnja ostrava

en: Chunk size %s
target: Chunk-uj %s

en: Circular mounts %s
target: Kružno montiranje  %s

en: Clean /tmp at each boot
target: Očisti /tmp pri svakom startanju

en: Clear all
target: Očisti sve

en: Click here to launch the wizard ->
target: Kliknite ovde za pokretanje čarobnjaka ->

en: Clients for different protocols including ssh
target: Klijenti za različite protokole uključujući i ssh

en: Close
target: Zatvori

en: Cocos (Keeling) Islands
target: Kokos (Kelingova) Ostrva

en: Collapse Tree
target: Skupi stablo

en: Colombia
target: Kolumbija

en: Color configuration
target: Podešavanje boje

en: Color depth: %s
target: Broj boja: %s

en: Command line
target: Komandna linija

en: Comoros
target: Komori

en: Compact
target: Kompakt

en: Computing FAT filesystem bounds
target: Proračunavam granice FAT datotečnog sistema

en: Configuration
target: Konfiguracija

en: Configuration Wizards
target: Čarobnjaci za konfiguraciju

en: Configuration of a remote printer
target: Podešavanje udaljenog štampača

en: Configure
target: Podesi

en: Configure Internet Access...
target: Podesi Internet pristup...

en: Configure Local Area Network...
target: Podesi lokalni mrežu...

en: Configure X
target: Konfigurisanje X-a

en: Configure all heads independently
target: Podesi sve glave nezavisno

en: Configure bootsplash picture
target: Podesite bootsplash sliku

en: Configure module
target: Modul za podešavanje

en: Configure mouse
target: Podešavanje miša

en: Configure networking
target: Podesi mrežu

en: Configure only card "%s"%s
target: Podesi samo karticu "%s"%s

en: Configure services
target: Podesi servise

en: Configure the connection
target: Podesi konekciju

en: Configure the network now
target: Podesi mrežu sada

en: Configuring IDE
target: Konfiguracija  IDE

en: Configuring PCMCIA cards...
target: Konfigurišem PCMCIA kartice...

en: Configuring applications...
target: Podešavam aplikacije...

en: Configuring network
target: Podešavanje mreže

en: Configuring network device %s
target: Podešavanje mrežnog uređaja %s

en: Configuring printer "%s"...
target: Podešavam štampač "%s" ...

en: Configuring scripts, installing software, starting servers...
target: Konfigurisanje skripti,instalacija softvera, startanje servisa...

en: Configuring...
target: Konfiguracija u toku...

en: Congratulations!
target: Čestitamo !

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
target: Čestitamo, instalacija je završena.
    Izvadite disketu iz drajva i pritisnite <Enter> da se računar resetuje.
    
    
    Za informacije o popravkama koje su na raspolaganju za ovo izdanje
    Mandrake Linux Linux-a, pročitajte deo 'Errata' koji možete naći na
    
    
    %s
    
    
    Informacije o konfigurisanju vašeg sistema možete naći u post-instalacionom
    poglavlju zvaničnog Mandrake Linux 'Vodiča za korisnike'.

en: Congratulations, the network and Internet configuration is finished.
    The configuration will now be applied to your system.
target: čestitamo, mrežna i internet konfiguracija je završena.
    
    Konfiguracija se sada može primeniti na sistem.

en: Connect
target: Konektuj

en: Connect %s
target: Konektuj %s

en: Connect to the Internet
target: Konektuj na internet

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
target: Povežite vaš štampač na Linux server i dozvolite vašoj Windows mašini(ama) da se konektuje na nju kao klijent.
    
    Da li zaista želite da nastavite da podešavate ovaj štampač kao što to sada radite?

en: Connect...
target: Konektovanje...

en: Connected
target: Konektovan

en: Connecting to the Internet
target: Povezivanje na Internet

en: Connection Configuration
target: Konfiguracija Internet konekcije

en: Connection Time:
target: Vreme konekcije:

en: Connection complete.
target: Povezivanje završeno.

en: Connection failed.
    Verify your configuration in the Mandrake Control Center.
target: povezivanje neuspelo.
    Proverite vašu konfiguraciju u Mandrake Kontrolnom Centru.

en: Connection name
target: Ime konekcije

en: Connection speed
target: Brzina konekcije

en: Connection timeout (in sec)
target: Vreme pauze konekcije (u sek.)

en: Connection type:
target: Tip konekcije:

en: Console Tools
target: Konzolni alati

en: Contacting Mandrake Linux web site to get the list of available mirrors...
target: KOntaktirajte Mandrake Linux web sajt da bi dobili listu dostupnih mirror-a

en: Contacting the mirror to get the list of available packages...
target: Kantaktirajte mirror za listu mogućih paketa

en: Content of the file
target: Sadržaj datotekse

en: Continue
target: Nastavi

en: Continue anyway?
target: Svejedno nastaviti ?

en: Control and Shift keys simultaneously
target: Control i  Shift tasteri istovremeno

en: Cook Islands
target: Kukova Ostrva

en: Copy %s to %s
target: Kopiraj %s u %s

en: Copy fonts on your system
target: Kopiraj fontove u sistem

en: Copying %s
target: Kopiranje %s

en: Costa Rica
target: Kostarika

en: Cote d'Ivoire
target: Obala slonovače

en: Couldn't access the floppy!
target: Ne mogu da pristupim disketi!

en: Cpuid family
target: Cpuid familija

en: Cpuid level
target: Cpuid nivo

en: Create
target: Kreiraj

en: Create a bootdisk
target: Napravi startni disk

en: Create a new partition
target: Kreiraj novu particiju

en: Create new theme
target: Kreiraj novu temu

en: Create/Transfer
    backup keys for SSH
target: Kreiraj/Prebaci
    backup tastere na SSH

en: Creating and formatting file %s
target: Kreiranje i formatiranje datoteke %s

en: Creating auto install floppy
target: Kreiram auto instalacionu disketu

en: Creating auto install floppy...
target: Kreiram auto instalacioni flopi

en: Creating bootdisk...
target: Kreiram startni disk...

en: Croatia
target: Hrvatska

en: Croatian
target: Hrvatski

en: Cron not available yet as non-root
target: Cron nije dostupan još uvek za non-root

en: Ctrl and Alt keys simultaneously
target: Ctrl i Alt tasteri istovremeno

en: Cuba
target: Kuba

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
target: Trenutna konfiguracija za `%s':
    
    Mreža: %s
    IP adresa %s
    IP atributi: %s
    Drajver: %s

en: Current interface configuration
target: Trenutna konfiguracija interfejsa

en: Current user
target: Trenutni korisnik

en: Custom
target: Izbor po želji

en: Custom Restore
target: Obnavljanje po želji

en: Custom configuration
target: Custom konfiguracija

en: Custom disk partitioning
target: Custom disk particioniranje

en: Cylinder %d to %d
target: Cilindar %d do %d

en: Cyprus
target: Kipar

en: Czech (QWERTY)
target: Češki (QWERTY)

en: Czech (QWERTZ)
target: Češki (QWERTZ)

en: Czech Republic
target: Češka

en: DHCP Client
target: DHCP klijent

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you don't know the meaning of an option, simply leave it as it is.
target: DHCP Server Konfiguracija.
    
    Ovde možete odabrati različite opcije za DHCP server konfiguraciju.
    Ukoliko ne znate značenje neke opcije, jednostavno je nemojte menjati.

en: DHCP client
target: DHCP klijent

en: DNS server address should be in format 1.2.3.4
target: DNS adresa treba da bude u formatu 1.2.3.4

en: DOS drive letter: %s (just a guess)
target: Oznaka DOS particije: %s (samo pretpostavka)

en: Danish
target: Danski

en: Database
target: Server,Baze podataka

en: Database Server
target: Server Baze podataka

en: Default
target: Podrazumevano

en: Default OS?
target: Podrazumevani OS ?

en: Default printer
target: Default štampač

en: Del profile...
target: Ukloni profil...

en: Delay before booting default image
target: Pauza pre startanja default image-a

en: Delete
target: Obriši

en: Delete All NBIs
target: Obriši sve NBIs

en: Delete Client
target: Obriši Klijenta

en: Delete Hard Drive tar files after backup to other media.
target: Obrišite tar fajove na tvrdom disku nakon backup-a na drugi medij.

en: Delete selected rule
target: Izbriši odabrano pravilo

en: Denmark
target: Danska

en: Description
target: Opis

en: Description of the fields:
target: Opis za polja:

en: Detailed information
target: Detaljne informacije

en: Details
target: Detalji

en: Detected %s
target: Detektovan %s

en: Detected hardware
target: Detektovani hardver

en: Detected model: %s %s
target: Detektovani modeli: %s %s

en: Detecting devices...
target: Detektujem  uređaje...

en: Detection in progress
target: Detekcija u toku

en: Devanagari
target: Devanagri

en: Development
target: Razvojna

en: Development simplified
target: Razvoj pojednostavljen

en: Device:
target: Uređaj:

en: Dialing mode
target: Mod za biranje

en: Dialup options
target: Dialup opcije

en: Did it work properly?
target: Da li radi ispravno?

en: Directory %s already contains data
    (%s)
target: Direktorijum %s već sadrži neke podatke
    (%s)

en: Disable Server
target: Deaktiviraj Server

en: Disabling servers...
target: Uklanjam servise...

en: Disconnect
target: Diskonektuj

en: Disconnect %s
target: Diskonektuj %s

en: Disconnect...
target: Diskonektovan...

en: Disconnection from the Internet complete.
target: Diskonektovanje za Interneta završeno.

en: Disconnection from the Internet failed.
target: Diskonektovanje sa Interneta nije uspelo.

en: Discover MandrakeClub and Mandrake Corporate Club
target: Otkrijte šta nude MandrakeClub i Mandrake Corporate Club

en: Discover MandrakeSoft's training catalogue Linux-Campus
target: Otkrijte MandrakeSoft-ov katalog Linux-Campus

en: Discover the most up-to-date graphical and multimedia tools!
target: Otkrijte većinu najnovijih grafičkih i multimedijalnih alata!

en: Display logo on Console
target: Prikaži logo u konzoli

en: Display theme
    under console
target: Prikaži teme
    u konzoli

en: Djibouti
target: Džibuti

en: Do it!
target: Uradi to!

en: Do new backup before restore (only for incremental backups.)
target: Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)

en: Do not include critical files (passwd, group, fstab)
target: Ne uključuj kritične fajlove (passwd, group, fstab)

en: Do not include the browser cache
target: Ne uključuj keš pretraživača

en: Do not print any test page
target: Nemoj da štampaj bilo koju test stranicu

en: Do not transfer printers
target: Ne prebacuj štampače

en: Do nothing
target: Ne radi ništa

en: Do you have an ISA sound card?
target: Da li imate ISA zvučnu karticu?

en: Do you have another one?
target: Da li imate još jedan?

en: Do you have any %s interfaces?
target: Imate li još %s interfejsa?

en: Do you really want to remove the printer "%s"?
target: Da li hoćete da uklonite štampač "%s"?

en: Do you want the BackSpace to return Delete in console?
target: Da li želite da BackSpace da vrati Delete u konzolu?

en: Do you want to click on this button?
target: Da li želite da kliknete na ovaj taster?

en: Do you want to enable printing on printers in the local network?
target: Da li želite da omogućite šrampanje na štampačima u lokalnoj mreži?

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
target: Da li želite da omogućite štampanje na štampačima koji su gore pomenuti na lokalnoj mreži?

en: Do you want to enable printing on the printers mentioned above?
target: Da li želite da omogućite štampanje na gore pomenutim štampačima?

en: Do you want to save /etc/fstab modifications
target: Da li hoćete da sačuvate izmene u /etc/fstab?

en: Do you want to set this printer ("%s")
    as the default printer?
target: Da li želite da podesite ovaj štampač ("%s")
    kao default štampač?

en: Do you want to start the connection at boot?
target: Da li želite da startujete konektovanje pri startanju sistema ?

en: Do you want to test the configuration?
target: Da li hoćete da testirate konfiguraciju?

en: Do you want to try to connect to the Internet now?
target: Da li hoćete da se konektujete na internet sada?

en: Do you want to use aboot?
target: Da li želite da koristite aboot ?

en: Documentation
target: Dokumentacija

en: Does not appear to be recordable media!
target: Ovo izgleda nije medij na koji može da se snima!

en: Domain
target: Domen

en: Domain Admin Password
target: Admin Lozinka domena

en: Domain Admin User Name
target: Admin Korisničko ime Domena

en: Domain Authentication Required
target: Potrebna Autentifikacija Domena

en: Domain Name Resolver
target: Program za definisanje Imena domena

en: Domain Name and Network Information Server
target: Ime Domena i Mrežni Informacioni Server

en: Domain Name:
target: Ime domena:

en: Domain name
target: Ime domena

en: Dominica
target: Dominikana

en: Dominican Republic
target: Dominikanska Republika

en: Done
target: Urađeno

en: Down
target: Dole

en: DrakFloppy Error: %s
target: DrakFloppy greška: %s

en: DrakSec Basic Options
target: DrakSec Osnovne Opcije

en: Drakbackup Configuration
target: Drakbackup Konfiguracija

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
target: Drakperm se koristi da videli fajlove u cilju podešavanja dozvola, vlasnika i grupa preko msec.
    VI takođe možete da editujete svoja sopstvena pravila koja će biti iznad default pravila.

en: Driver
target: Drajver

en: Driver:
target: Drajver:

en: Duplicate mount point %s
target: Duplirana tačka montiranja %s

en: Dutch
target: Danski

en: Dvorak (Norwegian)
target: Dvorak (Norveški)

en: Dvorak (Swedish)
target: Dvorak (Švedski)

en: Dynamic IP Address Pool:
target: Dinamička IP adresa Pool:

en: EIDE/SCSI channel
target: EIDE/SCSI kanal

en: ERROR: Cannot spawn %s.
target: GREŠKA: Nije moguće povezivanje %s.

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
target: Rani Intel Pentium čipovi su imali grešku u floating tački procesora koji nije uspevao da postigne zahtevanu preciznost pri izvođenju Floating point DIVision (FDIV)

en: Early pentiums were buggy and freezed when decoding the F00F bytecode
target: Prvi pentium procesori su bili bagoviti i blokirali su rad pri ddekodiranju F00F bytecode

en: East Europe
target: Istočna Evropa

en: East Timor
target: Istočni Timor

en: Ecuador
target: Ekvador

en: Edit current rule
target: Uredi trenutno pravilo

en: Edit selected host/network
target: Uredi selektovanog hosta/mrežu

en: Editors, shells, file tools, terminals
target: editori,šelovi, alati za datoteke, terminali

en: Egypt
target: Egipat

en: Either the server name or the server's IP must be given!
target: Morate dati ili ime servera ili njegov IP!

en: Empty
target: Prazno

en: Empty label not allowed
target: Prazna oznaka nije dozvoljena

en: Emulate third button?
target: Da imitiram rad 3 tastera?

en: Enable CD Boot?
target: Omogući startanje sa CD-a?

en: Enable OF Boot?
target: Omogući OF startanje?

en: Enable Server
target: Aktiviraj Server

en: Enable multiple profiles
target: Omogući multi-profile

en: Enabling servers...
target: >Omogućavam servisi...

en: Encryption key
target: Ključ za enkripciju

en: Encryption key (again)
target: Ključ za enkripciju (ponovo)

en: Enter Printer Name and Comments
target: Unesite ime Štampača i Komentare

en: Enter a printer device URI
target: Unesite URI za štampač

en: Enter a user
    %s
target: Unesi korisnika
    %s

en: Entering step `%s'
target: Pokrećem korak `%s'

en: Entries you'll have to fill:
    %s
target: Unosi koje treba da popunite:
    %s

en: Equatorial Guinea
target: Ekvatorijalna Gvineja

en: Erase entire disk
target: Izbriši celi disk

en: Eritrea
target: Eritreja

en: Error
target: Greška

en: Error during sending file via FTP.
     Please correct your FTP configuration.
target: Greška tokom slanja fajla preko FTP-a.
     Ispravite vašu FTP konfiguraciju.

en: Error during sendmail.
      Your report mail was not sent.
      Please configure sendmail
target: Greška pri slanju mail-a
      vaš izveštaj nije poslan
      Podesite sendmail

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
target: Greška pri instalaciji aboot-a, 
    Da li da probam da instaliram čak ako to vodi uništenju prve particije?

en: Error opening %s for writing: %s
target: Greška pri otvaranju %s za ispis: %s

en: Error reading file %s
target: Greška kod otvaranja datoteka %s

en: Error writing to file %s
target: Greška kod unosa u datoteka %s

en: Error!
target: Greška!

en: Estimating
target: Procenjujem

en: Estonia
target: Estonija

en: Estonian
target: Estonski

en: Etherboot ISO image is %s
target: Etherboot ISO image je %s

en: Ethernet Card
target: Mrežna kartica

en: Ethiopia
target: Etiopija

en: European protocol (EDSS1)
target: Evropski protokol (EDSS1)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
target: Svaki štampač mora da ima ime (na primer "štampač"). Polja za Opis i Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike.

en: Everything (no firewall)
target: Sve (bez firewall-a)

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
target: Sve je podešeno.
    Sada možete deliti Internet konekciju sa drugim kompjuterima na vašoj lokalnoj mreži  (LAN), koristeći automatsku mrežnu konfiguraciju (DHCP).

en: Examples for correct IPs:
target: Primeri pravilnih IP adresa:

en: Exit
target: Izlaz

en: Exit install
target: Izlaz iz instalacije

en: Expand Tree
target: Proširi stablo

en: Expert Area
target: Deo za eksperte

en: Expert Mode
target: Ekspert mod

en: Extended partition not supported on this platform
target: Extended particija nije podržana na ovoj platformi

en: External ISDN modem
target: Eksterni ISDN modem

en: FAT resizing failed: %s
target: FAT izmena veličine neuspela: %s

en: FATAL
target: FATALNA

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
target: Neuspelo dodavanje štampača "%s" u Star Office/OpenOffice.org/GIMP

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can loose data)
target: Neuspešna prvera fajl sistema %s. Da li želite da popravite greške? (budite pažljivi, možete izgubiti podatke)

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
target: Neospeo pokušaj uklanjanja štampača "%s" iz Star Office/OpenOffice.org/GIMP-a

en: Falkland Islands (Malvinas)
target: Foklandska Ostrva

en: Family of the cpu (eg: 6 for i686 class)
target: Familija procesora (npr: 6 za i686 klasu)

en: Faroe Islands
target: Farska Ostrva

en: Fiji
target: Fidži

en: File Selection
target: Odabir fajlova

en: File already exists. Use it?
target: Datoteka već postoji.Da li da ga koristim ?

en: File sharing
target: Zajedničko deljenje fajlova

en: Files Restored...
target: Fajlovi obnovljeni...

en: Filesystem encryption key
target: Ključ za enkripciju fajl sistema

en: Filesystem type:
target: Vrsta tatotečnog sistema:

en: Filesystem types:
target: Vrsta fajl sistema:

en: Finally, you will be asked whether you want to see the graphical interface
    at boot. Note this question will be asked even if you chose not to test the
    configuration. Obviously, you want to answer "No" if your machine is to
    act as a server, or if you were not successful in getting the display
    configured.
target: Na kraju, bićete upitani da li želite grafički interfejs
    pri startanju sistema. Ovo pitanje će vam biti postavnjeno čak i ako niste testirali
    konfiguraciju. Naravno, odgovorićete "Ne" ukoliko vaša mašina predstalja
    server, ili ukoliko niste uspešno podesili
    displejed.

en: Find the solutions of your problems via MandrakeSoft's online support platform
target: Pronađite rešenja za vaše probleme preko MandrakeSoft-ove online platforme za podršku

en: Finding packages to upgrade...
target: Tražim pakete za ažuriranje...

en: Finish
target: Kraj

en: Finland
target: Finska

en: Finnish
target: Finski

en: Firewall/Router
target: Server, Firewall/Router

en: Firewalling configuration detected!
target: Detektovana Firewalling konfiguracija

en: First DNS Server (optional)
target: Prvi DNS Server (opcija)

en: First Time Wizard
target: Čarobnjak po prvi put

en: First floppy drive
target: Prvi flopi/disketni uređaj

en: First sector of boot partition
target: Prvi sektor startne particije

en: First sector of drive (MBR)
target: Prvi sektor diska (MBR)

en: Flags
target: Zastave

en: Floppy can be removed now
target: Disketu sada možete da izbacite iz uređaja

en: Floppy format
target: Format diskete

en: Font Importation and monitoring application                                     
    --windows_import : import from all available windows partitions.
    --xls_fonts      : show all fonts that already exist from xls
    --strong         : strong verification of font.
    --install        : accept any font file and any directry.
    --uninstall      : uninstall any font or any directory of font.
    --replace        : replace all font if already exist
    --application    : 0 none application.
                     : 1 all application available supported.
                     : name_of_application like  so for staroffice 
                     : and gs for ghostscript for only this one.
target: Program za kontrolu i importovanje fontova                                     
    --windows_import : importuje sa svih dostupnih windows particija.
    --xls_fonts      : prikazuje sve fontove koji su već prisutni preko xls
    --strong         : strga provera fonta.
    --install        : instalira bilo koji font i bilo koji direktorijum.
    --uninstall      : deinstalira  bilo koji font ili bilo koji direktorijum sa fontovima.
    --replace        : zamenjuje sve fontove koji već postoje
    --application    : 0 bez aplikacije.
                     : 1 sve dostupne aplikacije podržane.
                     : name_of_application kao za na primer staroffice 
                     : i  gs za ghostscript za samo ovu.

en: Font List
target: Lista fontova

en: Fonts conversion
target: Konverzija fontova

en: Fonts copy
target: Kopija fonta

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
target: Za većinu modernih TV kartica, bttv modul GNU/Linux kernela jednostavno auto-detektuje prave parametre.
    Ukoliko je kartica pogrešno detektovana, ovde možete da podesite pravi tjuner i tip kartice. Samo selektujte parametre za vašu TV karticu ako je potrebno

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
target: Da bi ovo radilo sa W2K PDC, verovatno ćete morati da kao admin pokrenete: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /i da restartujete server.
    Takože ćete morati da imate username/password za  Domain Admin da bi pristupili mašini koja ima Windows(TM) domen.
    Ukoliko mreža još uvek nije omogućena, Drakx će pokušati da pristupi domenu nakon podešavanja mreže.
    Ukoliko ovo podešavanje ne uspe iz nekog razloga i atuentifikacija domena ne radi, pokrenite 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći vaš Windows(tm) Domen, i Admin Username/Password, nakon startanja sistema.
    Komanda 'wbinfo -t' će testirati da li vaša autentifikacija dobra.

en: Format
target: Formatiranje

en: Format of floppies supported by the drive
target: Format disketa koje uređaj prihvata

en: Format partitions
target: Formatiraj particije

en: Formatted
target: Formatirano

en: Formatting partition %s
target: Formatiranje particije %s

en: Found "%s" interface do you want to use it ?
target: Pronađen je "%s" interfejs, da li želi te da ga koristite ?

en: Found %s %s interfaces
target: Pronađeno  %s %s interfejsa

en: France
target: Francuska

en: France [SECAM]
target: Francuska [SECAM]

en: French
target: Francuski

en: French Guiana
target: Francuska Gvajana

en: French Polynesia
target: Fransuska Polinezija

en: French Southern Territories
target: Francuske Južne Teritorije

en: Frequency (MHz)
target: Frekvenicja (MHz)

en: GDI Laser Printer using the Zenographics ZJ-Stream Format
target: GDI Laserski štampač koristi Zenographics ZJ-Stream Format

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
target: GPM daje podršku za miša za teksulano-bazirane aplikacije kao što je
    Midnight Commander.Isto tako daje podršku za  pop-up menije na  konzoli.

en: Gambia
target: Gambija

en: Game station
target: Stanica za igru

en: Games
target: Igre

en: Gateway address should be in format 1.2.3.4
target: Gateway adresa treba da bude u formatu 1.2.3.4

en: Gateway device
target: Gateway uređaj

en: General
target: Opšte

en: Generate auto install floppy
target: Kreiraj auto instalacionu disketu

en: Generating preview ...
target: Generišem pregled...

en: Generation of the cpu (eg: 8 for PentiumIII, ...)
target: Generacija procesora (npr.: 8 za PentiumIII, ...)

en: Generic 2 Button Mouse
target: Generički 2 tastera miš

en: Generic 3 Button Mouse
target: Generički 3 tastera miš

en: Generic PS2 Wheel Mouse
target: Generički PS2 miš sa točkićem

en: Generic Printers
target: Generic Štampači

en: Geometry: %s cylinders, %s heads, %s sectors
target: Geometrija: %s cilindara, %s glava, %s sektora

en: Georgia
target: Gruzija

en: Georgian ("Latin" layout)
target: Gruzijski ("Latinični" rapored)

en: Georgian ("Russian" layout)
target: Gruzijski ("Ruski" raspored)

en: German
target: Nemački

en: German (no dead keys)
target: Nemački (bez mrtvih tastera)

en: Germany
target: Nemačka

en: Get Windows Fonts
target: Dobavi Windows fontove

en: Get involved in the Free Software world
target: Priključite se svetu Bespatnog Softvera

en: Get the most from the Internet
target: Konektujte se na Internet

en: Ghana
target: Gana

en: Ghostscript referencing
target: Ghostscript referenciranje

en: Gibraltar
target: Gilbratlar

en: Give a file name
target: Odredite ime fajla

en: Give the ram size in MB
target: Prikaži veličinu RAM-a u Mb

en: Gnome Workstation
target: Gnome radna stanica

en: Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd

en: Go on anyway?
target: Svejedno nastaviti dalje ?

en: Go on without configuring the network
target: Nastavi dalje bez podešavanja mreže

en: Graphic Card
target: Grafička kartica

en: Graphical Environment
target: Grafičko Okruženje

en: Graphical interface
target: Grafički interfejs

en: Graphical interface at startup
target: X okruženje na startu

en: Graphics card: %s
target: Grafička kartica: %s

en: Graphics card: %s
target: Grafička kartica: %s

en: Graphics memory: %s kB
target: Memorija na grafičkoj kartici: %s kB

en: Graphics programs such as The Gimp
target: Grafički programi kao što je Gimp

en: Greece
target: Grčka

en: Greek
target: Grčki

en: Greenland
target: Grenland

en: Guadeloupe
target: Gvadalupe

en: Guatemala
target: Gvatemala

en: Guinea
target: Gvineja

en: Guinea-Bissau
target: Gvineja-Bisao

en: Gurmukhi
target: Gurmuki

en: Guyana
target: Gvajana

en: Hard Disk Backup Progress...
target: Napredak Backup-ovanja hard diska...

en: Hard Disk Backup files...
target: backup-ovanje fajlova sa hard diska...

en: Hard drive detection
target: Detekcija hard diska

en: Hard drive information
target: Informacije o hard disku

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
target: HardDrake starta ispitivanje haredvera, i po potrebi đe podesiti 
    novi/izmenjeni hardver.

en: Harddrake help
target: Harddrake pomoć

en: Harddrake2 version
target: Harddrake2 verzija

en: Hardware clock set to GMT
target: Vaš sistemski (BIOS) časovnik je podešen na GMT

en: Hardware probing in progress
target: Detekcija hardvera u toku

en: Have a nice day!
target: Želimo vam prijatan dan!

en: Help
target: Pomoć

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
target: Ovo su postavljne opcije.
    Možete dodati nove ili izmeniti stare.

en: Here is a list of the available printing options for the current printer:
target: Ovde se nalazi lista dostupnih opcija za štampanje za tekući štampač:

en: Here is the full list of keyboards available
target: Ovde je predstavljena cela lista dostupnih tastatura

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
target: Ovde možete izabrati taster ili kombinaciju tastera koja će 
    dozvoliti izmenu rasporeda tastatura
    (npr: latin i non latin)

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
target: Ovde možete izabrati da li želite da štampači na ovoj mašini treba da budu dostupni na drugim udaljenim mašinama i na kojim udaljenim mašinama.

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
target: Ovde možete izabrati alternativni drajver (ili OSS ili ALSA) za svoju zvučnu karticu (%s).

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
target: Ovde možete da odredite bilo koji komandnu liniju na koji zadatak za štampač treba da bude upućen umesto da se direktno šalje na štampač.

en: Hide files
target: Sakrij fajlove

en: High
target: Velika

en: Higher
target: Višlji

en: Horizontal refresh rate
target: Horizontalna frekvencija

en: Host Name
target: Ime hosta

en: Host Path or Module
target: Putanja do hosta ili Modul

en: Host name
target: Ime hosta:

en: Hostname required
target: Potrebno je ime hosta

en: Hostname:
target: Ime hosta:

en: How is the printer connected?
target: Kako je štampač povezan?

en: Hungarian
target: Mađarski

en: Hungary
target: Mađarska

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
target: Mogu da zadržim vašu trenutnu konfiguraciju i pretpostaviti da je već podešen DHCP server; u tom slučaju proverite da li je dobro očitana Mreža koju koristite za vašu lokalnu mrežu; Ja je neću rekonfigurisati i neću dirati u vašu DHCP server konfiguraciju.
    
    default DNS unos je Caching Nameserver podešen na firewall-u. Možete je zameniti sa vašim ISP DNS IP, na primer.
    		      
    Inače, ja mogu da rekonfigurišem vaš interfejs i (re)konfigurišem DHCP server za vas.

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
target: Ja mogu podesti vaš računar da automatski podiže X okruženje pri startanju.
    Da li želite X okruženje pri restartu ?

en: I can't add any more partition
target: Ne mogu dodati više ni jednu particiju

en: I can't find any room for installing
target: Ne mogu da pronađem slobodan prostor za instaliranje

en: I can't find needed image file `%s'.
target: Ne mogu da pronađem potrebni image fajl `%s'.

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to loose all the partitions?
target: Ne mogu pročitati tabelu particija uređaj %s , mnogo je iskvarena za mene :(
    Pokušaću dalje zaobilazeći loše particijeMogu pokušati da formatiram loše particije (SVI PODACI će biti izgubljeni !).
    Drugo rešenje je da se DrakX onemogući da modufikuje tabelu particija.
    (greška je %s)
    
    Da li se pristajete da izgubite sve particije?

en: I don't know
target: Ne znam

en: I don't know how to format %s in type %s
target: ne znam kako da formatiram %s u tipu %s

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
target: Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI karticu na sledećem ekranu.

en: IP Range End:
target: Kraj IP raspona:

en: IP Range Start:
target: Početak IP raspona:

en: IP address
target: IP adresa

en: IP address of host/network:
target: IP adresa hosta/mreže:

en: IP address should be in format 1.2.3.4
target: IP adresa treba da bude u formatu 1.2.3.4

en: ISDN Configuration
target: ISDN Konfiguracija

en: ISDN connection
target: ISDN konekcija

en: Iceland
target: Island

en: Icelandic
target: Islandski

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Icewm, Window Maker, Enlightenment, Fvwm, itd

en: Icon
target: Ikona

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
target: Ukoliko imate gore navedene CD-ove, kliknite na  Ok.
    Ukoliko nemate nijedan CD, kliknite na  Cancel.
    Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok.

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
target: Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 sektorana početku 
    diska)

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
target: Ukoliko se vaš štampač ne nalazi na listi, izaberite kompatibilni (pogledajte upustvo za štampač) ili  sličan njemu.

en: Image
target: Slika

en: Import Fonts
target: Uvoz fontova

en: Importance: %s
target: Važno: %s

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
target: Kao dodatak, queues koji su kreirani sa ovim programom ili  "foomatic-configure" ne mogu biti prebačeni.

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
target: U nekim slučajevima, drajver %s zahteva dodatne informacije
    za pravilan rad, mada može lepo da radi i bez njih. Da li hoćete
    sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?
    Moguće je da će proba zaglaviti vaš računar, ali neće naneti nikakvu štetu.

en: India
target: Indija

en: Individual package selection
target: Pojedinačno biranje paketa

en: Indonesia
target: Indonezija

en: Information
target: Informacije

en: Information level that can be obtained through the cpuid instruction
target: Nivo informacija koji može biti dobavljen kroz cpuid instrukcije

en: Init Message
target: Inicijalna poruka

en: Initial tests
target: Testovi inicijala

en: Initrd-size
target: Initrd-veličina

en: Insert a FAT formatted floppy in drive %s
target: Ubacite FAT formatiranu praznu disketu u uređaj %s

en: Insert a blank floppy in drive %s
target: Ubacite praznu disketu u uređaj %s

en: Insert a floppy containing package selection
target: Ubacite disketu koja sadrži selekciju paketa

en: Insert a floppy in %s
target: Ubacite disketu u uređaj %s

en: Insert a floppy in drive
    All data on this floppy will be lost
target: Ubacite disketu u uređaj
    Svi podaci na disketi će biti izbrisani !

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
target: Ubacite CD sa oznakom  %s
     u CD uređaj sa tačkom montiranja /mnt/cdrom

en: Insert the tape with volume label %s
     in the tape drive device %s
target: Ubacite traku za oznakom %s
     u uređaj za trake %s

en: Install
target: Instaliraj

en: Install & convert Fonts
target: Instliraj i konvertuj fontove

en: Install List
target: Instaliraj listu

en: Install bootloader
target: Instaliraj starter

en: Install rpm
target: Instaliraj rpm

en: Install system
target: Instaliraj sistem

en: Install themes
target: Instaliraj teme

en: Install/Upgrade
target: Instalacija/Ažuriranje

en: Installation of %s failed. The following error occured:
target: Instalacija %s-a neuspela. Greška je:

en: Installation of bootloader failed. The following error occured:
target: Instalacija startera neuspela. Greška je:

en: Installing
target: Instaliram

en: Installing %s ...
target: Instaliram %s ...

en: Installing Foomatic...
target: Instaliram Foomatic ...

en: Installing HPOJ package...
target: Instaliram HPOJ paket...

en: Installing SANE packages...
target: Instaliram SANE pakete...

en: Installing a printing system in the %s security level
target: Instaliram sistem za štampanje u %s sigurnosnom nivou

en: Installing bootloader
target: Instaliram starter

en: Installing driver for %s card %s
target: Instaliram drajver za %s karticu %s

en: Installing mtools packages...
target: Instaliram mtools pakete...

en: Installing package %s
target: Instaliram paket %s

en: Installing package %s
    %d%%
target: Instaliram pakete %s
    %d%%

en: Installing packages...
target: Instaliram pakete...

en: Interface
target: Interfejs

en: Interface "%s"
target: Interfejs "%s"

en: Interface %s
target: Interfejs %s

en: Interface %s (using module %s)
target: Interfejs %s (koristeći modul %s)

en: Interface:
target: Interfejs:

en: Internal ISDN card
target: Interna  ISDN kartica

en: Internet Connection Configuration
target: Konfiguracija Internet Konekcija

en: Internet Connection Sharing
target: Deljenje internet konekcije

en: Internet Connection Sharing configuration
target: Konfiguracija Deljenja Internet konekcije

en: Internet Connection Sharing currently disabled
target: Deljenje internet konekcije je trenutno onemogućeno

en: Internet Connection Sharing currently enabled
target: Deljenje internet konekcije je trenutno omogućeno

en: Internet Connection Sharing is now disabled.
target: Deljenje internet konekcije je onemogućeno.

en: Internet Connection Sharing is now enabled.
target: Deljenje internet konekcije je omogućeno.

en: Internet access
target: Internet pristup

en: Internet configuration
target: Konfiguracija interneta

en: Internet connection
target: Internet konekcija

en: Internet connection & configuration
target: Internet konekcija i  konfiguracija

en: Internet connection configuration
target: Konfiguracija Internet konekcija

en: Internet station
target: Internet stanica

en: Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.
target: Upoznavanje
    
    Operativni sistem i druge komponente dostupne u Mandrake Linux distribuciji 
    na dalje će biti zvane "Softverski Proizvodi" . Softverski proizvodi uključuju, ali nisu i 
    ograničeni na, skup programa, metoda, pravila i dokumentaciju koja je vezanaza operativni 
    sistem i druge komponente Mandrake Linux distribucije.
    
    
    1. Licencni ugovor
    
    Pažljivo pročitajte ovaj dokument. Ovaj dokument je licencni ugovor izmeđuizmeđu vas i   
    MandrakeSoft S.A. koji polaže pravo na Softverske Proizvode.
    Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom vidu, vi eksplicitno 
    prihvatate i potpuno se slažete sa prihvatanjem postavki i uslova i stanja u ovoj Licenci. 
    Ukoliko se ne slažete sa bilo kojim delom Licence, nemate pravo da instalirate, kopirate ili koristite 
    Softverske proizvode. 
    Bilo koji pokušaj instalacije, dupliciranja ili upotrebe Softverskih Proizvoda na način koji se ne slaže sa 
    postavkama i uslovima ove Licence će voditi gubitku vaših prava pod ovom 
    Licencom. Na osnovu gubitka Licence, morate odmah uništitisve kopije 
    Softverskih Proizvoda.
    
    
    2. Ograničena Garancija
    
    Softverski Proizvodi i prateća dokumentracija su omogućene "kao takve", i bez garancije, do granica 
    koje su dozvoljene zakonom.
    MandrakeSoft S.A. neće, u svim uslovima i u granicama zakona, biti ogovoran za bilo koje specijalne,
    slučajne, direktne ili indirektne štete (uključujući neograničeneštete ili gubitke 
    u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tražnje i kazne koje su rezultat sudske 
    odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili nemogućnosti korišćenja Softverskih 
    Proizvoda, čak iako je MandrakeSoft S.A. savetovao i ukazivao na mogućnost pojave takve 
    štete.
    
    Ograničena odgovornosti vezane za posedovanje ili upotrebu zabranjenog softvera u nekim zemljama
    
    Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi distributeri neće, ni pod kojim uslovima, biti 
    odgovorni za specijalne, namerne direktne ili indirektne štete(uključujući neograničene 
    štete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tražnje 
    i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje proizilaze 
    iz upotrebe ili nemogućnosti korišćenja Softverskih Komponenti ili koje proizilaze download-ovanih softverskih komponenti 
    bilo kog Mandrake Linux sajta koji su zabranjeni ili ograničeni u nekim zemljama po lokalnim zakonima.
    Ova ograničena prava se primenjuju, ali nisu i ograničena na,kriptografske komponente 
    koje se nalaze u Softverskim Proizvodima.
    
    
    3. GPL i za nju vezane Licence
    
    Softverski proizvodi se sastoje od komponenti kreiranih od strane različtih lica ili entiteta. Većina  
    od ovih komponenti se nalaze pod postavkama i uslovima GNU Opšte Javne 
    Licence, koja se od sada zove  "GPL", ili slične licence. Većina ovih licenci dozvoljava upotrebu, 
    dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. Molimo Vas da pažljivo pročitte postavke 
    i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje komponenete. Bilo koje pitanje 
    vezano za licencu komponenti treba da bude adresirano na autora komponente a nena MandrakeSoft.
    Programi koje je razvio MandrakeSoft S.A. podležu pod GPL Licencu. Dokumentacija pisana od 
    strane MandrakeSoft S.A. podleže pod posebnu licencu. Molim da pogledate dokumentaciju  
    za detalje.
    
    
    4. Prava na Intelektualnu svojinu
    
    Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i ona 
    su zaštićena zakonima o intelektualnoj svojini i pravima koji se primenjuju na softverske programe.
    MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju SoftverskihProizvoda, kako za celinu tako i za 
    delove, za sve sve svrhe i sve upotrebe.
    "Mandrake", "Mandrake Linux" i pridruženi logotipi i oznake MandrakeSoft S.A.  
    
    
    5. Zakonska prava 
    
    Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske odluke, ovaj 
    deo se isključuje iz ovog ugvora. Obavezni ste da primenjujeteostale delove ovog
    ugovora.
    Postavke i uslovi ove Licence su određeni Zakonima Francuske.
    Svi nesporazumi bi trebali biti rešeni van suda. Kao poslednje 
    sredstvo, nesporazumi će biti upućeni na odgovarajuće Sudske ustanove u Parizu - Francuska.
    Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  MandrakeSoft S.A.

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
target: Dat je pogrešan port: %s.
    Pravilan format je "port/tcp" ili "port/udp", 
    gde je port između 1 i 65535.

en: Iranian
target: Iranski

en: Iraq
target: Irak

en: Ireland
target: Irska

en: Is FPU present
target: da je FPU prisutan

en: Is this an install or an upgrade?
target: Da li je ovo instalacija ili ažuriranje?

en: Is this correct?
target: Da li je ovo ispravno ?

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
target: Da li je vaš uređaj više-funkcionalni uređaj proidzvođača HP ili Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 sa skenereom, Sony IJP-V100),  HP PhotoSmart ili HP LaserJet 2200?

en: Israel
target: Izrael

en: Israeli
target: Jevrejski

en: Israeli (Phonetic)
target: Jevrejski (Fonetski)

en: Italian
target: Italijanski

en: Italy
target: Italija

en: Jamaica
target: Jamajka

en: Japan (cable)
target: Japan (kabl)

en: Japanese 106 keys
target: Japanski 106 tastera

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
target: Priključite se MandrakeSofttimovima za podršku i Linux zajednici online da bi podelili svoje znanje i pomogli drugima tako što ćete postati priznati Ekspert na online veb sajtu za tehničku podršku:

en: KDE Workstation
target: KDE padna stanica

en: Kazakhstan
target: Kazahstan

en: Keep the changes?
    The current configuration is:
    
    %s
target: Sačuvaj promene?
    Trenutna konfiguracija je:
    
    %s

en: Kenya
target: Kenija

en: Kernel Boot Timeout
target: Pauza pri startanju kernela

en: Keyboard
target: Tastatura

en: Keyboard layout: %s
target: Tip tastature: %s

en: Korean keyboard
target: Korejanska tastatura

en: Kuwait
target: Kuvajt

en: Kyrgyzstan
target: Kirgistan

en: LAN Configuration
target: LAN konfiguracija

en: LAN configuration
target: LAN konfiguracija

en: LAN connection
target: LAN konekcija

en: LILO with graphical menu
target: LILO sa grafičkim menijem

en: LILO with text menu
target: LILO sa tekstualnim menijem

en: LILO/grub Installation
target: LILO/grub instalacija

en: LPD - Line Printer Daemon
target: LPD - Line Printer Demon

en: LPD and LPRng do not support IPP printers.
target: LPD i LPRng ne podržavaju IPP štampače.

en: LPRng - LPR New Generation
target: LPRng - LPR Nove Generacije

en: LVM name?
target: LVM ime?

en: LVM-disks %s
target: LVM-diskovi %s

en: Label
target: Oznaka

en: Language
target: Izaberite jezik

en: Laotian
target: Laoski

en: Latin American
target: Latino-Američki

en: Latvia
target: Letonija

en: Latvian
target: Letonski

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
target: Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili
    firewall radi zaštite vaše mašine od mrežnih napada.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
target: Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk

en: Launch the graphical environment when your system starts
target: Pokreni X-Window sistem pri stratanju

en: Launch the sound system on your machine
target: Pokreće sistem za zvuk na vašoj mašini

en: Launch userdrake
target: Pokreni userdrake

en: Lebanon
target: Liban

en: Left "Windows" key
target: Levi "Windows" taster

en: Lesotho
target: Lesoto

en: Level
target: Nivo

en: Level %s
target: Nivo %s

en: Lexmark inkjet configuration
target: Konfiguracija Lexmark inkjet štampača

en: LiLo and Bootsplash themes installation successfull
target: Instalacija LiLo-a i Bootsplash tema uspela

en: Liberia
target: Liberija

en: License agreement
target: LIcencirani ugovor

en: Liechtenstein
target: Lihtenštajn

en: Lilo message not found
target: Lilo poruka nije pronađena

en: Lilo screen
target: Lilo ekran

en: Lilo/grub mode
target: Lilo/Grub mod

en: Linux Standard Base. Third party applications support
target: Linux-ova Standardna Baza. Podrška za Third party aplikaicje

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
target: Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog
    servera.

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
target: Linuxconf đe ponekad izvoditi razne zadatke tokom
    startanja sistema radi održavanja i podešavanja sistema.

en: List of data corrupted:
target: Lista korumpiranih podataka:

en: List of data to restore:
target: Lista podataka za obnavljanje:

en: Lithuania
target: Litvanija

en: Lithuanian "number row" QWERTY
target: Litvanski "number row"QWERTY

en: Lithuanian "phonetic" QWERTY
target: Litvanski "fonetski" QWERTY

en: Lithuanian AZERTY (new)
target: Litvanski AZERTY(novi)

en: Lithuanian AZERTY (old)
target: Litvanski AZERTY(stari)

en: Load from floppy
target: Učitaj sa diskete

en: Load the drivers for your usb devices.
target: Podiže drajvere za vaše usb uređaje.

en: Load/Save on floppy
target: Učitaj/Snimi na disketu

en: Loading from floppy
target: Učitavam sa diskete

en: Loading module %s failed.
    Do you want to try again with other parameters?
target: Podizanje modula %s neuspelo.
    Da li želite pokušate ponovo sa drugim parametrima ?

en: Local Network adress
target: Adresa Lokalne Mreže

en: Local Printer
target: Lokalni štampač

en: Local Printers
target: Lokalni štampači

en: Local files
target: Lokalne datoteke

en: Local measure
target: Lokalna mera

en: Local network(s)
target: Lokalna(e) mreža(e)

en: Local printer
target: Lokalni  štampač

en: Location
target: Lokacija

en: Location on the bus
target: Lokacija na busu

en: Login ID
target: ID za logovanje

en: Logitech CC Series
target: Logitech CC serija (serijski)

en: Logitech Mouse (serial, old C7 type)
target: Logitech mouse (serijski, stari C7 tip)

en: Logs
target: Logovi

en: Looking at packages already installed...
target: Tražim već instalirane pakete...

en: Looking for available packages and rebuilding rpm database...
target: Tražim dustupne pakete za reizgradnju rpm baze podataka...

en: Looking for available packages...
target: Tražim pakete

en: Loopback file name:
target: Ime Loopback datoteke:

en: Loopback file name: %s
target: Ime Loopback datoteke: %s

en: Loopback file(s):
       %s
target: Loopback fajl(ovi): 
       %s

en: Luxembourg
target: Luksemburg

en: MM Series
target: MM serija

en: MOVE YOUR WHEEL!
target: pomerite točkić !

en: Macedonia
target: Makedonija

en: Macedonian
target: Makedonski

en: Madagascar
target: Madagaskar

en: Mail Server
target: Server za el.poštu

en: Mail alert
target: Mail alarm

en: Mail alert configuration
target: KOnfiguracija alarma za Mail

en: Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'.
target: Izvrši initrd 'mkinitrd -f /boot/initrd-%s.img %s'.

en: Make kernel message quiet by default
target: Podesite sa poruka kernela bude skrivena po osnovnoj postavci

en: Making printer port available for CUPS...
target: Omogućavam port štampača dostupnim za CUPS...

en: Malawi
target: Malavi

en: Malayalam
target: Malajski

en: Malaysia
target: Malezija

en: Maldives
target: Maldivi

en: Maltese (UK)
target: Malteški (UK)

en: Maltese (US)
target: Malteški (US)

en: Mandatory package %s is missing
target: Tekući paket %s nedostaje

en: Mandrake Bug Report Tool
target: Mandrake Program za Prijavljivanje Grešaka

en: Mandrake Control Center
target: Mandrake Kontrolni Centar

en: Mandrake Linux 9.1 enables you to use the very latest software to play audio files, edit and handle your images or photos, and play videos
target: Mandrake Linux 9.1 vam omogućava da dovedete svoj multimedijalni računar do krajnih granica! Koristeći najnoviji softver za slušanje muzičkih i audio fajlova, editovanje i organizovanje vaših slika i fotografija, gledanje TV-a i videa, i još mnogo toga

en: Mandrake Linux 9.1 has selected the best software for you. Surf the Web and view animations with Mozilla and Konqueror, or read your mail and handle your personal information with Evolution and Kmail
target: Mandrake Linux 9.1 vam omogućava najbolji softver za pristup svemu što Internet nudi: Surfovanje i pregled animacija sa Mozilla-om i Konqueror, razmenu email-a i organizaciju svojih ličnih podataka sa Evolution i Kmail, i još mnogo toga

en: Mandrake Linux 9.1 is the ultimate development platform
target: Mandrake Linux 9.1 ultimativna razvojna platforma

en: Mandrake Linux 9.1 provides a powerful tool to fully customize and configure your machine
target: Mandrake Linux 9.1 Kontrolni Centar je lokacija za potupuno  i kompletno podešavanje vašeg Mandrake sistema

en: Mandrake Linux 9.1 provides the best Open Source games - arcade, action, strategy, ...
target: Mandrake Linux 9.1 vam nudi najbolje Open Source igre - arkade, akcije, strategije, ...

en: Mandrake Linux 9.1 provides you with 11 user interfaces that can be fully modified: KDE 3, Gnome 2, WindowMaker, ...
target: Mandrake Linux 9.1 vam donosi 11 različitih grfičkih desktop okruženja i window menadžera pa tako možete izabrati između  GNOME 2, KDE 3, Window Maker...

en: Mandrake Linux Installation %s
target: Mandrake Linux Instalacija %s

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
target: Možete izabrati drugi jezik koji će biti dostupan posle instalacije

en: Mandrake Terminal Server Configuration
target: Konfiguracija Mandrake Terminalnog servera

en: Mandrake Tools Explanation
target: Mandrake Alati za objašnjenja

en: MandrakeClub and Mandrake Corporate Club were created for business and private users of Mandrake Linux who would like to directly support their favorite Linux distribution while also receiving special privileges. If you enjoy our products, if your company benefits from our products to gain a competititve edge, if you want to support Mandrake Linux development, join MandrakeClub!
target: MandrakeClub i Mandrake Corporate Club su kreirani za biznis i privatne korisnike Mandrake Linux distribucije koji žele da direktno podrže svoju omiljenu distribuciju a dobijajući specijalne privilegije. Ukoliko uživate u našim proizvodima, ukoliko vaša kompanijna ostvaruje profit od naših proizvoda , ukoliko želite da podržite razvoj Mandrake Linux-a, pridružite se MandrakeClub-u!

en: MandrakeSoft works alongside a selection of companies offering professional solutions compatible with Mandrake Linux. A list of these partners is available on the MandrakeStore
target: MandrakeSoft radi zajedno sa velikim brojem kompanija nudeći profesionalna rešenja kompatibilna sa Mandrake Linux-om. Lista ovih partnera je dostupna u MandrakeStore

en: Manual configuration
target: Ručna konfiguracija

en: Marshall Islands
target: Maršalova Ostrva

en: Martinique
target: Martinik

en: Mauritania
target: Mauritanija

en: Mauritius
target: Mauricijus

en: Mayotte
target: Majot

en: Media class
target: Klasa Medija

en: Messages
target: Poruke

en: Mexico
target: Meksiko

en: Micronesia
target: Mikronezija

en: Minimal install
target: Minimalno instaliraj

en: Model name
target: Ime modela

en: Modify
target: Promeni

en: Modify RAID
target: Promeni RAID

en: Modify printer configuration
target: Izmena konfiguracije štampača

en: Module
target: Modul

en: Module name
target: Ime modula

en: Module options:
target: Opcije modula:

en: Moldova
target: Moldavija

en: Monaco
target: Monako

en: Mongolia
target: Mongolija

en: Mongolian (cyrillic)
target: Mongolski (ćirilica)

en: Monitor HorizSync: %s
target: Monitor - horizontalna frekvencija: %s

en: Monitor VertRefresh: %s
target: Monitor - vertikalno osvežavanje: %s

en: Montserrat
target: Monserat

en: More
target: Još

en: More Graphical Desktops (Gnome, IceWM)
target: Još grafičkih okruženja (Gnome, IceWM)

en: More Options
target: Više Opcija

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose the one you want to resize in order to install your new
    Mandrake Linux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
target: Jedna ili više Microsoft Windows particija je detektovano 
    na hard disku. Izaberite koju od njih želite da smanjite da bi instalirali
    novi Mandrake Linux operativni sistem.
    
    Svaka particija je ispisana na sledeći način: "Ime Linux-a","Ime Windows-a"
    "Kapacitet".
    
    "Ime Linux-a" je kodirano na sledeći način: "tip hard diska", "broj hard diska",
    "broj particije" (na primer, "hda1").
    
    "Tip hard diska" je "hd" ukoliko je hard disk ID uređaj i "sd"
    ukoliko je SCSI hard disk.
    
    "Broj hard diska" je uvek slovo posle "hd" ili "sd". Sa IDE hard diskovima:
    
     * "a" znači  "master hard disk na primarnom  IDE kontroleru",
    
     * "b" znači "slave hard disk na primarnom IDE kontroloeru",
    
     * "c" znači "master hard disk na sekundranom IDE kontroloeru",
    
     * "d" znači "slave hard disk na sekundarnom IDE kontroleru".
    
    Sa SCSI hard diskovima, "a" znači "primarni hard disk", a "b" znači "sekundarni hard disk ", itd.
    
    "Ime Windows-a" je slovo hard diska pod Windows-om (prvi disk
    ili particija se zove "C:").

en: Morocco
target: Maroko

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
target: Većina ovih vrednosti je izvučena iz
    vašeg dosadašnjeg sistema.
    MOžete ih izmeniti po potrebi.

en: Mount
target: Montiraj

en: Mount options
target: Opcije montiranja

en: Mount point
target: Tačka montiranja

en: Mount point:
target: Tačka montiranja:

en: Mount points must begin with a leading /
target: Tačke montiranja moraju da počinju sa vodećim /

en: Mounted
target: Montirano

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
target: Montiranje i demontiranje svih Mrežnih fajl sistema(NFS), SMB (Lan
    Manager/Windows), i  NCP (NetWare) tačaka montiranja.

en: Mouse
target: Miš

en: Mouse Port
target: Port za miša

en: Mouse device: %s
target: Miš je postavljen na uređaj: %s

en: Mouse type: %s
target: Tip miša: %s

en: Move
target: Premesti

en: Move files to the new partition
target: Premesti fajlove na novu particiju

en: Move selected rule down one level
target: Spusti odabrano pravilo za jedan nivo

en: Move selected rule up one level
target: Podigni odabrano pravilo za jedan nivo

en: Moving
target: Premeštanje

en: Moving files to the new partition
target: Premeštanje fajlova na novu particiju

en: Moving partition...
target: Premeštanje particije...

en: Mozambique
target: Mozambik

en: Multi-head configuration
target: Multi-head konfiguracija

en: Multimedia - CD Burning
target: Multimedija - CD prženje

en: Multimedia - Graphics
target: Multimedija - Grafika

en: Multimedia - Sound
target: Multimedija - Zvuk

en: Multimedia - Video
target: Multimedija - Video

en: Multimedia station
target: Multimedijalna stanica

en: Myanmar
target: Mianmar (Burma)

en: Myanmar (Burmese)
target: Mijanmar (Burma)

en: NCP queue name missing!
target: Nedostaje ime za NCP red!

en: NCP server name missing!
target: Nedostaje ime NCP servera!

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
target: NFS je popularni protokol za razmenu  fajlova preko TCP/IP mreža.
    Ovaj servis omogućava funkcionalnost NFS  file locking funkcije

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
target: NFS je popularni protokol za razmenu  fajlova preko TCP/IP mreža.
    Ovaj servis omogućava funkcionalnost NFS servera,koji se konfiguriše preko 
    /etc/exports datoteke.

en: NFS server, SMB server, Proxy server, ssh server
target: NFS server, SMB server, Proxy server, SSH server

en: NIS Domain
target: NIS Domen

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
target: NAPOMENA: U zavisnosti od modela štampača i sistema za štampanje potrebno je još %d MB dodatnog softera da se instalira.

en: Name
target: Ime

en: Name Servers:
target: Navedi servere:

en: Name of printer
target: Ime štampača

en: Name of printer should contain only letters, numbers and the underscore
target: Ime štampača treba da sadrži samo slova, brojeve i underscore

en: Name of the profile to create (the new profile is created as a copy of the current one) :
target: Ime profila koji se kreira (novi profil je kreiran kao kopija trenutnog) :

en: Name:
target: Ime:

en: Name: %s
target: Ime: %s

en: Namibia
target: Namibija

en: Need hostname, username and password!
target: Potrebno je ime hosta, korisničko ime i lozinka!

en: Need to create /etc/dhcpd.conf first!
target: Prvo morate da kreirate /etc/dhcpd.conf !

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
target: Morate da restartujete Menadžera za Dispej da bi sve izmene bile vidljive. 
    (service dm restart - u kondzoli)

en: Net Method:
target: Mrežni metod:

en: NetWare Printer Options
target: NetWare opcije štampača

en: Netherlands
target: Holandija

en: Netherlands Antilles
target: Holandski Antili

en: Netmask
target: Mrežna maska

en: Netmask:
target: Mrežna maska:

en: Network
target: Mreža

en: Network %s
target: Mreža %s

en: Network Computer (client)
target: Mrežni kompjuter, (klijent)

en: Network Computer server
target: Mrežni Server

en: Network Configuration
target: Podešavanje mreže

en: Network Configuration Wizard
target: čarobnjak za podešavanje mreže

en: Network Monitoring
target: Praćenje stanja mreže

en: Network Options
target: Mrežne opcije

en: Network configuration
target: Podešavanje mreže

en: Network configuration (%d adapters)
target: Podešavanje mreže (%d adaptera)

en: Network functionality not configured
target: Mrežna funkcionalnost nije podešena

en: Network interface
target: Mrežni interfejs

en: Network interface already configured
target: Mrežni interfejs je već podeššen

en: Network printer "%s", port %s
target: Mrežni štamapč "%s", port %s

en: Network printer (TCP/Socket)
target: Mrežni štampač (TCP/Socket)

en: New
target: Novi

en: New Caledonia
target: Nova Kaledonija

en: New Zealand
target: NOvi Zeland

en: New configuration (isdn-light)
target: Nova konfiguracija (isdn-light)

en: New devfs device
target: Novi devfs uređaj

en: New printer name
target: Novo ime štampača

en: New profile...
target: Novi profil...

en: New size in MB:
target: Nova veličina u MB:

en: Newzealand
target: Novi Zeland

en: Next
target: Sledeći

en: Next ->
target: Sledeći  ->

en: Nicaragua
target: Nikaragva

en: Nigeria
target: Nigerija

en: No
target: Ne

en: No (experts only)
target: Ne (samo eksperti)

en: No CD device defined!
target: Nije određen CD uređaj!

en: No CDR/DVDR in drive!
target: Nema CDR/DVDR u uređaju!

en: No ISDN PCI card found. Please select one on the next screen.
target: Nije pronađena ISDN PCI kartica.Izaberite jednu na sledećem ekranu.

en: No Internet Connection Sharing has ever been configured.
target: Do sada Deljenje internet konekcije nije podešavano.

en: No Sound Card detected!
target: Zvučna kartica nije detektovana!

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Zvučna kartica nije detektovana na vašoj mašini. Proverite da li Linux-supported zvučna kartica pravilno priključena.
    
    
    Možete posetiti našu bazu podržanog hardvera na:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No TV Card detected!
target: TV kartica nije detektovana!

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: TV kartica na vašem računaru nije detektovana. Proverite da li Linux-supported Video/TV kartica pravilno priključena.
    
    
    Možete posetiti našu bazu podržanog hardvera na:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No additional information
    about this service, sorry.
target: žalim ali nema dodatnih informacija
    o ovom servisu.

en: No alternative driver
target: Nema alternativnog drajvera

en: No browser available! Please install one
target: Nema dostupnog pretraživača! Molim Vas da instalirate barem jednog

en: No browser is installed on your system, Please install one if you want to browse the help system
target: Nijedan pretraživač nije instaliran. Molim Vas da instalirate jedan da bi mogli da koristite sitem dza pomoć

en: No changes to backup!
target: Nema izmena za backup!

en: No configuration file found 
    please click Wizard or Advanced.
target: Nije pronađen kofiguracioni fajl 
    Kliknite na Čarobnjak ili Napredno.

en: No configuration, please click Wizard or Advanced.
target: Bez konfiguracije, kliknite na Čarobnjak ili Napredno

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
target: Nije detektovana nijedna mrežna kartica.
    Ne mogu da podesim ovaj tip konekcije.

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
target: Nije detektovana nijedna mrežna kartica. Pokrenite alat za konfigurisanje hardvera.

en: No floppy drive available
target: Nepristupačan disketni uređaj

en: No floppy drive available!
target: Disketa nije pronađena!

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
target: Nema slobodnog prostora za 1MB bootstrap! Instalacija đe se nastaviti, ali da bi podigli vašsistem, morađete da kreirate bootstrap particiju u DiskDrake-u

en: No hard drives found
target: Nije pronađen hard disk

en: No kernel selected!
target: Nijedan kernel nije izabran!

en: No known driver
target: Nema poznatog drajvera

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: Nije pronađen lokalni štampač! Da bi ručno instalirali štampač unesite ime uređaja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/lp1, ...).

en: No mouse
target: Nema miša

en: No net boot images created!
target: Nema kreiranih No net boot image!

en: No network adapter on your system!
target: Nema mrežnog adaptera u vašem sistemu !

en: No network card
target: Nije pronađena mrežna kartica

en: No partition available
target: nema dostupnih particija

en: No password
target: Bez lozinke

en: No password prompt on %s at port %s
target: Bez traženja lozinke na %s za port %s

en: No printer
target: Bez štampača

en: No printer found!
target: Nije pronađen štampač!

en: No remote machines
target: Nema udaljenih mašina

en: No sharing
target: Nema zajedničkog deljenja

en: No sound card detected. Try "harddrake" after installation
target: Nije detektovana zvučna kartica. Pokrenite "harddrake" nakon instalacije

en: No tape in %s!
target: Nema trake u %s!

en: No test pages
target: Bez test stranice

en: No, I don't want autologin
target: Ne, ja ne želim autologovanje

en: Norfolk Island
target: Norfolk Ostrva

en: Normal Mode
target: Normalni Mod

en: Normal modem connection
target: Normalna modemska konekcija

en: Northern Mariana Islands
target: Severno Marijanska Ostrva

en: Norway
target: Norveška

en: Norwegian
target: Norveški

en: Not connected
target: Nije konektovan

en: Not enough free space for auto-allocating
target: Nema dovoljno slobodnog prostora za auto-alociranje

en: Not enough free space to allocate new partitions
target: Nema dovoljno slobodnog prostora za alociranje novih particija

en: Not enough partitions for RAID level %d
target: Nema dovoljno particija za RAID nivo %d

en: Not enough swap space to fulfill installation, please add some
target: Nema dovoljno swap-a da završi instalaciju, dodajte još swap-a

en: Not erasable media!
target: Medij nije izbrisiv!

en: Not formatted
target: Nije formatirano

en: Not installed
target: Nije instalirano

en: Not the correct CD label. Disk is labelled %s.
target: NIje ipstavna oznaka CDa. Disk je označen sa %s.

en: Not the correct tape label. Tape is labelled %s.
target: NIje dobra oznaka trake. Traka je označena sa %s.

en: Nothing to do
target: Nema šta da se uradi

en: Notice
target: Napomena

en: Now, you can run xawtv (under X Window!) !
target: Sada možete pokrenuti xawtv (pod X Window okruženjem!) !

en: Number of buttons
target: Broj tastera

en: Number of capture buffers:
target: Broj capture buffera :

en: OK to restore the other files.
target: U Redu za obnavanje drugih fajlova.

en: OKI winprinter configuration
target: OKI win štampač konfiguracija

en: OSS (Open Sound System) was the first sound API. It's an OS independant sound API (it's available on most unices systems) but it's a very basic and limited API.
    What's more, OSS drivers all reinvent the wheel.
    
    ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
    supports quite a large range of ISA, USB and PCI cards.
    
    It also provides a much higher API than OSS.
    
    To use alsa, one can either use:
    - the old compatibility OSS api
    - the new ALSA api that provides many enhanced features but requires using the ALSA library.
target: OSS (Otvoreni Sistem za Zvuk)je bio prvu zvučni API. On je nezavisan zvučni API u odnosu na operativni sistem(dostupan je na većini unices sistema) ali je prilično rudimenaran i ograničen API.
    Čak šta više, većina drajvera kao da ponovo otkirva točak 
    
    ALSA (Advanced Linux Sound Architecture) je modularne arhitekture koji
    podržava veliki broj ISA, USB i PCI kartica.
    
    On takođe obezbeđuje mnogo veći API u odnosu na  OSS.
    
    Da bi koristili alsa, možete koristi ili:
    - stari kompatibilni OSS api
    - novi ALSA api koji omogućava mnogo napredne mogućnosti ali zahteva korišćenje ALSA biblioteke.

en: Office Workstation
target: Radna(Office) stanica

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
target: Office programi: tekst procesori (kword, abiword), tabele (kspread, gnumeric), pdf preglednici, itd

en: Official vendor name of the cpu
target: Zvanično ime proizvođača za procesor

en: Ok
target: U redu

en: Old configuration (isdn4net)
target: Stara konfiguracija (isdn4net)

en: Old device file
target: Stari fajl uređaja

en: On CUPS server "%s"
target: Na CUPS server "%s"

en: On boot
target: Pri startanju

en: Open Firmware Delay
target: Otpočni Firmware pauzu

en: Optimize your security
target: Optimizute svoju sigurnost

en: Option %s must be a number!
target: Opcija %s mora biti broj!

en: Option %s must be an integer number!
target: Opcija %s mora biti broj!

en: Option %s out of range!
target: Opcije %s van opsega!

en: Option ``Restrict command line options'' is of no use without a password
target: Opcija``Ograničena komandna linika - opcije'' je neupotrebljiva bez lozinke

en: Options
target: Opcije

en: Options: %s
target: Opcije: %s

en: Other
target: Drugo

en: Other (not drakbackup)
    keys in place already
target: Drugi (ne drakbackup)
    tasteri su već na mestu

en: Other Graphical Desktops
target: Drugi grafički desktopovi

en: Other Media
target: Drugi Medij

en: Other OS (MacOS...)
target: Drugi OS-ovi (MacOS,BSD,...)

en: Other OS (SunOS...)
target: Drugi OS-ovi (SunOS,BSD,...)

en: Other OS (windows...)
target: Drugi OS-ovi (Windows,BSD,BeOS,...)

en: Other ports
target: Ostali portovi

en: Our full range of Linux solutions, as well as special offers on products and other "goodies," are available online on our e-store:
target: Široki raspon Linux rešenja, kao i slecijalnih ponuda proizvoda i 'goodies'-a, je dostupan i preko Interneta u našem e-marketu:

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
target: PCMCIA podrška  se obično koristi za  eternet i modeme u laptopovima.
    Neće se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran 
    na sistemu kom nije potreban.

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
target: PCMCIA podrška ne postoji više za 2.2 kernele. Koristite 2.4 kernel.

en: PDQ - Print, Don't Queue
target: PDQ - Štampaj, nemoj da pamtiš

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
target: PDQ podržava samo lokalne štampače, udaljene LPD štampače, i Socket/TCP štampače.

en: PLL setting:
target: PLL opcije :

en: POP and IMAP Server
target: POP i IMAP Server

en: Package Group Selection
target: Odabir grupa paketa

en: Package not installed
target: Paket nije instaliran

en: Package selection
target: Odabir paketa

en: Package:
target: Paket:

en: Papua New Guinea
target: Papua Nova Gvineja

en: Paraguay
target: Paragvaj

en: Parameters
target: Parametri

en: Paranoid
target: Paranoidna

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
target: Boot particija po default-u
       (za podizanje MS-DOSa, ne za lilo)

en: Partition table of drive %s is going to be written to disk!
target: Tabela particija za uređaj %s će biti zapisana na disk!

en: Partition table type: %s
target: Tip tabele particija: %s

en: Partitioning failed: %s
target: Particioniranje nije uspelo: %s

en: Password
target: Lozinka

en: Password (again)
target: Lozinka (ponovite)

en: Password required
target: Potrebna je Lozinka

en: Passwords are now enabled, but use as a networked computer is still not recommended.
target: Lozinke su sada omogućene, ali se i dalje ne preporučuje da se koristi
    kao mrežni računar.

en: Path
target: Putanja

en: Path or Module required
target: Potrebna je putanja ili modul

en: Path selection
target: Selekcija putanje

en: Periodic Checks
target: Periodične provere

en: Permission denied transferring %s to %s
target: Odbijen pristup pri transferu %s na %s

en: Permission problem accessing CD.
target: Problemi sa dozvolama pristupa za CD.

en: Permissions
target: Dozvole

en: Personal Finance
target: Lične finansije

en: Personal Information Management
target: Upravljanje privatnim informacijama

en: Philippines
target: Filipini

en: Phone number
target: Broj telefona

en: Photo memory card access on your HP multi-function device
target: Pristup Foto memorijskoj kartici na vašem HP multi-funkcionalnom uređaju

en: Photo test page
target: Foto test stranica

en: Pipe into command
target: Ubaci u komandu

en: Pipe job into a command
target: Ubaci naredbu u komandu

en: Please Wait... Applying the configuration
target: Samo momenat... primena konfiguracije

en: Please be sure that the cron daemon is included in your services. 
    
    Note that currently all 'net' medias also use the hard drive.
target: Proverite da li je cron demon uključen u vaše servise. 
    
    Možete primetiti da svi 'net' mediji takođe koriste hard disk.

en: Please check all users that you want to include in your backup.
target: Selektujte sve korisnike koje želite da uključite u backup.

en: Please check for multisession CD
target: Proverite da li imate multi-sesijski CD

en: Please check if you are using CDRW media
target: Proverite da li koristite CDRW medij

en: Please check if you are using a DVDR device
target: Proverite da li koristite DVDR uređaj

en: Please check if you are using a DVDRAM device
target: Proverite da li koristite DVDRAM uređaj

en: Please check if you want to eject your tape after the backup.
target: Proverite da li želite da izbacite traku nakon backup-a.

en: Please check if you want to erase your RW media (1st Session)
target: Proverite da li želite izbrišete vaš RW medij (1 sesiju)

en: Please check if you want to erase your tape before the backup.
target: Proverite da li želite izbrišete sve trake backup-a.

en: Please check if you want to use the non-rewinding device.
target: Proverite da li želite da koristite uređaj koji nema premotavanje.

en: Please choose a language to use.
target: Izaberite koji jezik želite da korisitite.

en: Please choose for each step whether it will replay like your install, or it will be manual
target: izaberite za svaki korak da li će biti istovetan i automatizovan iliće biti ručno podešavan

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
target: Molim Vas da izaberete učitavanje ili snimanje selekcije paketa na disketu.
    Format koji se koristi je isti kao i kod  auto_install generisanih disketa.

en: Please choose the
    media for backup.
target: Izaberite
    medij za backup.

en: Please choose the desired security level
target: Izaberite željeni sigurnosni nivo

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
target: Izaberite prvi broj od 10 koje želite da editujete,
    ili samo kliknite na Enter da bi nastavili.
    Vaš izbor?

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
target: Izaberite port na koji je vaš štampač povezan ili unesite ime/ime fajla uređaja u liniju za unos

en: Please choose the port that your printer is connected to.
target: Izaberite port na koji je vaš računar povezan.

en: Please choose the time 
    interval between each backup
target: Izaberite vremenski interval 
    između svakog backup-a

en: Please choose what network adapter will be connected to your Local Area Network.
target: Izaberite koji će mrežni adapter biti korišten za LANmrežu.

en: Please choose what you want to backup
target: Izaberite šta želite da backup-ujete

en: Please choose where you want to backup
target: Izaberite šta želite da backup-ujete

en: Please choose which network adapter you want to use to connect to Internet.
target: Izaberite mrežni adapter koji želite da koristite za konekciju na internet

en: Please choose which serial port your modem is connected to.
target: Izaberite serijski port  na koji je modem povezan.

en: Please choose which serial port your mouse is connected to.
target: Izaberite na koji serijski port je vaš miš priključen.

en: Please choose your CD/DVD device
    (Press Enter to propogate settings to other fields.
    This field isn't necessary, only a tool to fill in the form.)
target: Izaberite vaš  CD/DVD uređaj
    (Pritisnite Enter da bi popunili sledeća polja.
    Ovo polje nije neophodno, samo alata za popunjavanje forme.)

en: Please choose your CD/DVD media size (Mb)
target: Izaberite veličinu vašeg CD/DVD medija (Mb)

en: Please choose your keyboard layout.
target: Izaberite  raspored tastature.

en: Please choose your mouse type.
target: Izaberite tip miša

en: Please choose your type of mouse.
target: Izaberite tip miša.

en: Please click on a partition
target: Kliknite na particiju

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
target: Molim unesite IP konfiguraciju za ovu mašinu.
    Svaka stavka treba de bude tavka treba da bude uneta kao
    IP adresa (na primer, 123.45.67.89).

en: Please enter the WebDAV server URL
target: Unesite URL WebDAV servera

en: Please enter the device name to use for backup
target: Unesite ime uređaja koji koristite za backup

en: Please enter the directory (or module) to
     put the backup on this host.
target: Unesite direktorijum (ili modul) da
     bi postavili backup na ovaj host.

en: Please enter the directory to save to:
target: Unesite direktorijum da bi u njega sačuvali:

en: Please enter the directory to save:
target: Unesite direktorijum da bi sačuvali:

en: Please enter the directory where backups are stored
target: Unesite direktorijum gde je smešten backup

en: Please enter the host name or IP.
target: Molim Vas unesete ime hosta ili IP.

en: Please enter the maximum size
     allowed for Drakbackup
target: Unesite maksimalnu veličinu
     dozvoljenu za Drakbackup

en: Please enter your CD Writer device name
     ex: 0,1,0
target: Unesite ime vašeg CD Writer uređaja
     ex: 0,1,0

en: Please enter your email address below
target: Unesite svoju email adresu dole

en: Please enter your host name if you know it.
    Some DHCP servers require the hostname to work.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
target: Molim unesite  ime hosta ukoiko ga znate
    'Neki DHCP serveri zahtevaju ime hosta da bi radili.
    Vaše ime hosta treba da bude puno ime kao npr.
    ``mybox.mylab.myco.com''.

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
target: Molim unesite ime vašeg domena, ime hosta, kao IP adrese dodatnih
    'nameserver'-a. Ime vašeg hosta treba da bude puno kvalifikovano ime hosta,
    kao na pr.  ``mybox.mylab.myco.com''.
    Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna.

en: Please enter your login
target: Unesite vaše korisničko ime

en: Please enter your password
target: Unesite vašu lozinku

en: Please enter your username, password and domain name to access this host.
target: Unesite svoje korisničko ime, lozinku i domen da bi mogli da pristupite hostu.

en: Please fill or check the field below
target: Molim VAS da popunite ili označite polja ispod

en: Please give a user name
target: Odredite korisničko ime

en: Please insert floppy disk:
target: Ubacite disketu:

en: Please insert the Boot floppy used in drive %s
target: Ubacite Boot disketu u uređaj %s

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
target: Ubacite vaš Instalacioni CD u pogon i pritisnite OK kada ste spremni.
    Ukoliko ga nemate pritisnite Poništi da bi izbegli live upgrade.

en: Please insert the Update Modules floppy in drive %s
target: Ubacite Update Modules disketu u uređaj %s

en: Please log out and then use Ctrl-Alt-BackSpace
target: Molim vaš izlogujte se i restartujte (Ctrl-Alt-BackSpace) računar

en: Please make a backup of your data first
target: Molim vas, prvo napravite kopiju vaših podataka

en: Please relog into %s to activate the changes
target: Molim, ponovo unesite %s radi aktiviranja promena

en: Please select data to backup...
target: Izaberite podatke koji želite da backup-ujete...

en: Please select data to restore...
target: Izaberite podatke za obnavljanje...

en: Please select media for backup...
target: Izaberite medij koji želite da korisitite za backup...

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
target: Molim, izaberite odgovarajući port. Na primer, COM1 port pod MS Windows-om
     u Linux-u ima oznaku ttyS0.

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
target: Izaberite test sranicu koju želite da štampate.
    Napomena: Ukoliko se radi o foto test stranici može biti potrebno mnogo više vremena da bi se ištampala a laserski štampači sa malo memorije je čak neće ni ištampati. U većini slučajeva dovoljno je da ištampate standardnu test stranicu.

en: Please test the mouse
target: Molim Vas da testirate miša

en: Please try again
target: Probajte ponovo

en: Please uncheck or remove it on next time.
target: Deselektujte ili uklonite ih sledeći put.

en: Please wait
target: Samo momenat...

en: Please wait, preparing installation...
target: Samo momenat, pripremam instalaciju

en: Please wait, setting security level...
target: Samo momenat, podešavam nivo sigurnosti...

en: Please wait, setting security options...
target: Samo momenat, podešavam sigurnosne opcije...

en: Please,
    type in your tv norm and country
target: Molim Vas da
    ukucate vaš tv sistem i zemlju

en: Please, choose your keyboard layout.
target: Koji  raspored tastature želite ?

en: Plug'n Play probing failed. Please select the correct monitor
target: Plug'n Play testiranje nije uspelo. Izaberite tačan model monitora

en: Poland
target: Poljska

en: Polish
target: Poljski

en: Polish (qwerty layout)
target: Poljski (qwerty raspored)

en: Polish (qwertz layout)
target: Poljski (qwertz raspored)

en: Poor
target: Bedna

en: Portuguese
target: Portugalski

en: Post Install
target: Post-instalacija

en: Post Uninstall
target: Post-deinstalacija

en: Post-install configuration
target: Postinstalaciona konfiguracija

en: Postfix Mail Server
target: Postfix mail server

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
target: Postfix je  Mail Transport Agent,koji u stvaripremešta poštu sa jedne mašine na drugu.

en: PostgreSQL or MySQL database server
target: PostgreSQL ili MySQL server za bazu podataka

en: Potential LAN address conflict found in current config of %s!
target: Potencijalni konflikt LAN adrese u trenutnom konfig. %s!

en: Precise RAM size if needed (found %d MB)
target: Definiši veličinu RAM ako je potrebno (detektovano je %d MB)

en: Preference:
target: Karakteristike:

en: Preparing bootloader...
target: Pripremam starter...

en: Preparing installation
target: Pripremam instalaciju

en: Preparing printer database...
target: Pripremam bazu podataka za štampače...

en: Press enter to boot the selected OS, 'e' to edit the
target: Pritisnite enter za podizanje izabranog OS,'e' za promenu

en: Preview
target: Pregled

en: Previous
target: Prethodni

en: Print
target: Štampaj

en: Print Queue Name
target: Print Queue ime:

en: Print option list
target: Lista sa opcijama za štampač

en: Print test pages
target: Ištampaj test stranice

en: Printer
target: Štampač

en: Printer "%s" on SMB/Windows server "%s"
target: Štampač "%s" na SMB/Windows serveru "%s"

en: Printer "%s" on server "%s"
target: Štampač "%s" na serveru "%s"

en: Printer %s
    What do you want to modify on this printer?
target: Štampač %s
    Da li hoćete da izmenite opcije za ovaj štampač?

en: Printer Device URI
target: Uređaj za štampač URI

en: Printer Server
target: Server štampača:

en: Printer auto-detection
target: Auto-detekcija štampača

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
target: Auto-detekcija štampača (Lokalni, TCP/Socket, i SMB štampači)

en: Printer connection type
target: Tip konekcije štampača

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
target: default opcije za štampač
    
    Proverite da li su veličina papira i vrsta tinte/mod štampanja (ukoliko je dostupan) kao i hardverska konfiguracija za laserske štampače (memorija, duplex jedinica, dodatne kasete) podešeni ispravno. Imajte na umu da pri visokom kvalitetu štampe/rezoluciji štampe štampanje može biti značajnije usporeno.

en: Printer host name or IP
target: Ime hosta ili IP za štampač

en: Printer host name or IP missing!
target: Nedostaje ime hosta ili IP za štampač!

en: Printer manufacturer, model
target: Proizođač i model štampača

en: Printer manufacturer, model, driver
target: Proizvođač, model i drajver štampača

en: Printer model selection
target: Selekcija modela štampača

en: Printer name, description, location
target: Ime, opis i lokacija štampača

en: Printer on NetWare server
target: Štampač na NetWare serveru

en: Printer on SMB/Windows 95/98/NT server
target: Štampač na SMB/Windows 95/98/NT serveru

en: Printer on parallel port \#%s
target: Štampač na paralelnom portu \#%s

en: Printer on remote CUPS server
target: Štampač ili Udaljeni CUPS server

en: Printer on remote lpd server
target: Štampač ili Udaljeni lpd server

en: Printer options
target: Opcije štampača

en: Printer sharing
target: Zajedničko deljenje štampača

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
target: Printerdrake je upoređivao ime modela dobijenog autodetekcijomsa modelima prikazanim u njegovoj bazi podataka da bi pronašao odgovarajući. Ovaj izbor može biti pogrešan, posebno kada se vaš štampač uopštene nalazi u bazi podataka. Zato proverite da je izbor ispravan i kliknite "Ovaj model je ispravan" ukoliko jeste a ukoliko nije, kliknite "Ručno izaberite model" da bi mogli da sami izaberete štampač na sledećem ekranu.
    
    Za vaš štampač Printerdrake je pronašao:
    
    %s

en: Printing
target: Štampanje

en: Printing on the printer "%s"
target: Štampam na štampaču "%s"

en: Printing system:
target: Sistem za štampanje:

en: Printing test page(s)...
target: Štampam test stran(ice)u...

en: Printing/Photo Card Access on "%s"
target: Kartica za pristup Štampanje/Foto na "%s"

en: Printing/Scanning on "%s"
target: Štampam/Skeniram na "%s"

en: Printing/Scanning/Photo Cards on "%s"
target: Kartice za Štampanje/Skeniranje/Foto na "%s"

en: Problems installing package %s
target: Problemi pri instalaciji %s paketa

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
target: Pojavili su se problemi tokom konfiguracije.
    Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko vaša konekcija ne radi, treba da ponovite konfiguraciju

en: Processor ID
target: ID procesora

en: Profile
target: Profil

en: Profile to delete:
target: Profil za brisanje:

en: Profile:
target: Profil:

en: Programs to manage your finances, such as gnucash
target: Programi za upravljanje vašim finansijama, kao što je gnucash

en: ProgressBar color selection
target: Izbor boje za traku koja prikazuje stanje napredovanja

en: Property
target: Svojstvo

en: Protocol
target: Protokol

en: Protocol for the rest of the world
target: Protokol za statak sveta

en: Protocol for the rest of the world
    No D-Channel (leased lines)
target: Protokol za Ostatak sveta 
     bez D-kanala (zakupljene linije)

en: Provider dns 1 (optional)
target: Provajderov dns 1 (opciono)

en: Provider dns 2 (optional)
target: Provajderov dns 2 (opciono)

en: Provider name (ex provider.net)
target: Ime provajdera (npr. provider.net)

en: Provider phone number
target: Broj telefona provajdera

en: Proxies configuration
target: Podešavanje proksija

en: Proxy should be http://...
target: Proxy treba da bude http://...

en: Puerto Rico
target: Porto Riko

en: Push multimedia to its limits!
target: Dovedite multimediju do njenih granica!

en: Qatar
target: Katar

en: Quit
target: Kraj

en: Quit without saving
target: Kraj bez snimanja promena

en: Quit without writing the partition table?
target: Kraj bez snimanja promena u tabele particija?

en: RAID-disks %s
target: RAID-diskovi %s

en: Radio support:
target: Podrška za radio :

en: Raw printer
target: Raw štampač

en: Raw printer (No driver)
target: Raw štampač (bez drajvera)

en: Re-configure interface and DHCP server
target: Rekonfiguriši interfejs i DHCP server

en: Read carefully!
target: PAŽLJIVO PROČITAJ !

en: Read-only
target: Samo-čitanje

en: Read-write
target: Čitanje-pisanje RW

en: Reading printer data...
target: Učitavam podatke za štampač ...

en: Reading printer database...
target: Učitavam CUPS bazu podataka...

en: Real name
target: Pravo ime

en: Receiving Speed:
target: Brzina pri pprijemu:

en: Refresh printer list (to display all available remote CUPS printers)
target: Osveži listu štampača (da bi prikazao sve dostupne udaljene CUPS štampače)

en: Refreshing printer data...
target: Osvežavam podatake o štampaču...

en: Refuse
target: Odbaci

en: Relaunch 'lilo'
target: Restartuj 'lilo'

en: Release:
target: Verzija:

en: Reload partition table
target: Ponovo učitaj tabelu particija

en: Remember this password
target: Zapamti ovu lozinku

en: Remote Administration
target: Udaljena administracija

en: Remote CUPS server
target: Udaljeni CUPS server

en: Remote Control
target: Udaljena kontrola

en: Remote Printers
target: Udaljeni štampači

en: Remote host name
target: Ime udaljenog host-a

en: Remote host name missing!
target: Nedostaje ime udaljenog host-a!

en: Remote lpd Printer Options
target: Opcije za udaljeni lpd

en: Remote printer
target: Udaljeni štampač

en: Remote printer name
target: Ime udaljeni štampača

en: Remote printer name missing!
target: Nedostaje ime udaljenog štampača!

en: Removable media automounting
target: Automontiranje prenosivog medija

en: Remove
target: Ukloni

en: Remove List
target: Ukloni Listu

en: Remove Selected
target: Ukloni Selektovano

en: Remove Windows(TM)
target: Ukloni Windows(TM)

en: Remove a module
target: Ukloni modul

en: Remove fonts on your system
target: Ukloni fontove iz sistema

en: Remove from LVM
target: Ukloni sa LVM-a

en: Remove from RAID
target: Ukloni sa RAID-a

en: Remove printer
target: Ukloni štampač

en: Remove selected host/network
target: Ukloni selektovanog hosta/mrežu

en: Remove the last item
target: Ukloni zadnju vrednost

en: Remove the logical volumes first
target: Ukloni prvo logičke volumene

en: Remove the loopback file?
target: Ukloni loopback fajl ?

en: Remove this printer from Star Office/OpenOffice.org/GIMP
target: Ukloni ovaj štampač iz Star Office/OpenOffice.org/GIMP

en: Remove user directories before restore.
target: Ukloni korisničke direktorijume pre obnavljanja

en: Removing %s
target: Uklanjanje: %s

en: Removing %s ...
target: Ukanjam %s ...

en: Removing old printer "%s"...
target: Uklanjam stari štampač "%s" ...

en: Removing printer "%s"...
target: Uklanjam štampač "%s" ...

en: Removing printer from Star Office/OpenOffice.org/GIMP
target: Uklanjanje štampača iz Star Office/OpenOffice.org/GIMP

en: Replay
target: Ponavljanje

en: Report
target: Prijava

en: Rescue partition table
target: Spasi tabelu particija

en: Reselect correct fonts
target: Ponovo selektuj ispravne fontove

en: Resize
target: Promeni veličinu

en: Resizing
target: Promena veličine (resizing)

en: Resizing Windows partition
target: Proračunavam granice Windows fajl-sistema

en: Resolution
target: Rezolucija

en: Resolution: %s
target: Rezolucija: %s

en: Resolutions
target: Rezolucija

en: Restart XFS
target: Restartuj XFS

en: Restarting printing system...
target: Restartujem sistem za štampanje ...

en: Restore
target: Obnovi

en: Restore Failed...
target: Obnova neuspela...

en: Restore From CD
target: Obnovi sa CDa

en: Restore From Catalog
target: Obnovi iz Kataloga

en: Restore From Tape
target: Obnovi sa trake

en: Restore Other
target: Obnovi ostalo

en: Restore Progress
target: Obnovi stanje napredovanja

en: Restore Selected
    Catalog Entry
target: Obnovi izabrane
    Unose u katalogu

en: Restore Selected
    Files
target: Obnovi odabrane
    fajlove

en: Restore Users
target: Obnovi korisnike

en: Restore Via Network
target: Obnovi preko Mreže

en: Restore Via Network Protocol: %s
target: Oblnovi preko Mrežnog protokola: %s

en: Restore all backups
target: Obnovi sve backup-ove

en: Restore from Hard Disk.
target: Povrati (restore) sa Hard Diska

en: Restore partition table
target: Obnovi tabelu particija

en: Restore system
target: Obnovi sistem

en: Restoring from file %s failed: %s
target: Otvaranje iz datoteke %s nije uspelo: %s

en: Restrict command line options
target: Ograničena komandna linika - opcije

en: Right "Windows" key
target: Desni "Windows" taster

en: Right Alt key
target: Desni Alt taster

en: Romania
target: Rumunija

en: Romanian (qwerty)
target: Rumunski (qwerty)

en: Romanian (qwertz)
target: Rumunski (qwertz)

en: Root partition size in MB:
target: Veličina Root particije u MB:

en: Routers:
target: Ruteri:

en: Run "sndconfig" after installation to configure your sound card
target: Pokrenite "sndconfig" nakon isntalacije da bi podesili svoju zvučnu karticu

en: Run config tool
target: Pokreni konfiguracioni alat

en: Running "%s" ...
target: Pokrećem "%s" ...

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
target: Pokreće komande zakazane at komandom,kao i  batch  komande kao je opterećenost
    sistema mala.

en: Russian
target: Ruski

en: Russian (Yawerty)
target: Ruski (Javerty)

en: Rwanda
target: Ruanda

en: SECURITY WARNING!
target: SIGURNOSNO UPOZORENJE!

en: SILO Installation
target: SILO instalacija

en: SMB (Windows 9x/NT) Printer Options
target: SMB (Windows 9x/NT)  opcije štampača

en: SMB server IP
target: SMB server IP:

en: SMB server host
target: SMB server  host:

en: Sagem (using pppoa) usb
target: Sagem (koristi pppoa) usb

en: Saint Helena
target: Sveta Jelena

en: Saint Kitts and Nevis
target: Sveti Kits i Nevis

en: Saint Lucia
target: Sveta Lucija

en: Saint Pierre and Miquelon
target: Sveti Pjer i Mikelon

en: Saint Vincent and the Grenadines
target: Sveti Vinsent i Grenandini

en: Samba share name missing!
target: Nedostaje deljeno ime za Samba-u!

en: Sao Tome and Principe
target: Sao Tome i Principe

en: Saudi Arabia
target: Saudijska Arabija

en: Save
target: Sačuvaj

en: Save as..
target: Snimi Kao...

en: Save on floppy
target: Snimi na disketu

en: Save packages selection
target: Sačuvaj selekciju paketa

en: Save partition table
target: Sačuvaj tabelu particija

en: Save theme
target: Sačuvajte temu

en: Saves and restores system entropy pool for higher quality random
    number generation.
target: čuva i obnavlja sistemski  entropy pool za veći kvalitet generisanje
    slučajnih brojeva.

en: Scanning for TV channels
target: Skeniranje za TV kanale

en: Scanning for TV channels in progress ...
target: Skeniranje TV kanala u toku ...

en: Scanning network...
target: Skeniram mrežu ...

en: Scanning on your HP multi-function device
target: Skeniranje na vašem HP multi-funkcionalnom uređaju

en: Scanning partitions to find mount points
target: Skeniranje particija za pronalaženje tačke montiranja

en: Scientific Workstation
target: Naučna radna stanica

en: Screenshots will be available after install in %s
target: Snimci će biti dostupni nakon instalacije u %s

en: Script-based
target: Bazirano na skripti

en: Search for fonts in installed list
target: Traži fontove u liti instaliranih

en: Search installed fonts
target: Traži instalirane fontove

en: Search servers
target: Traži servere

en: Second DNS Server (optional)
target: Drugi DNS Server (opcija)

en: Second floppy drive
target: Drugi flopi/disketni uređaj

en: Sector
target: Sektor

en: Security
target: Sigurnost

en: Security Administrator (login or email)
target: Administracija Nivoa Sigurnosti (login ili email)

en: Security Administrator:
target: Administrator za sigurnost:

en: Security Alerts:
target: Sigurnosni alarmi:

en: Security Level:
target: Nivo sigurnosti:

en: Security level
target: Sigurnosni nivo

en: See hardware info
target: Pogledaj informacije o hardveru

en: Select Printer Connection
target: Izbor povezanosti štampača

en: Select Printer Spooler
target: Izaberite Spooler za štampač

en: Select a device !
target: Izaberite uređaj !

en: Select another media to restore from
target: Izaberitedrugi medij za obnavljanje sa

en: Select file
target: Izaberite datoteku

en: Select installation class
target: Izaberite inst.klasu

en: Select model manually
target: Ručno izaberite model

en: Select the files or directories and click on 'Add'
target: Odaberite fajlove ili direktorijume i klinite na 'Dodaj'

en: Select the font file or directory and click on 'Add'
target: Izaberite font ili direktorijum i kliknite na  'Dodaj'

en: Select the memory size of your graphics card
target: Količina memorije na grafičkoj kartici

en: Select user manually
target: Izaberite korisnike ručno

en: Select your provider.
    If it isn't listed, choose Unlisted.
target: Izaberite svog provajdera.
     Ukoliko nije na listi, izaberite Unlisted

en: Selected All
target: Selektuj Sve

en: Selected size is larger than available space
target: Selektovana veličina je veđa od slobodnog prostora

en: Send mail report after each backup to:
target: Pošalji mail izveštaj nakon svakog backup/a na :

en: Sending Speed:
target: Brzina pri slanju:

en: Sending files...
target: Šaljem fajlove...

en: Serbian (cyrillic)
target: Srpski (ćirilica)

en: Services
target: Servisi

en: Services and deamons
target: Servisi i demoni

en: Services: %d activated for %d registered
target: Servisi: %d aktiviranih za %d registrovanih

en: Set of tools for mail, news, web, file transfer, and chat
target: Set alata za el.poštu, vesti, web, transfer datoteka, ili chat

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
target: Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za pretraživanje Interneta

en: Set root password
target: Unesi root lozinku

en: Set this printer as the default
target: Podesi ovaj štampač kao default

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
target: Podesite vaš Windows server da omogući pristup štamapču pod IPP protokolom i podesite štampanje sa ove mašine sa "%s" tipom konekcije u Printerdrake-u.

en: Set-GID
target: Podesi-GID

en: Set-UID
target: Podesi-UID

en: Settings
target: Opcije

en: Seychelles
target: Sejšeli

en: Share name
target: Deljeno (zajedničko)  ime :

en: Sharing of local printers
target: Deljenje lokalnih štampača

en: Show automatically selected packages
target: Automatski prikaži izabrane pakete

en: Show current interface configuration
target: Prikaži trenutnu konfiguraciju

en: Show only for the selected day
target: Prikaži samo za izabrani dan

en: Sierra Leone
target: Sijera Leone

en: Singapore
target: Singapur

en: Size
target: Veličina

en: Size in MB:
target: Veličina u MB:

en: Size of the (second level) cpu cache
target: Veličina (drugi nivo) procesorskog keša

en: Size: %d KB
target: Veličina: %d KB

en: Size: %s
target: Veličina: %s

en: Size: %s
target: Veličina: %s

en: Skip
target: Preskoči

en: Slovakia
target: Slavačka

en: Slovakian (QWERTY)
target: Slovački (QWERTY)

en: Slovakian (QWERTZ)
target: Slovački (QWERTZ)

en: Slovenia
target: Slovenija

en: Slovenian
target: Slovenački

en: Software Manager
target: Menadžer Softvera

en: Solomon Islands
target: Solomonova Ostrva

en: Somalia
target: Somalija

en: Some devices in the "%s" hardware class were removed:
target: Neki uređaji u "%s" klasi hardvera su uklonjeni:

en: Some devices were added:
target: Neki uređaji su dodani:

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
target: Neke hardverske komponente u vašem računaru zahtevaju odgovarajuće drajvere da bi normalno funkcionisale.
    Informacije o njima možete pronaći na: %s

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
target: Neki važni paketi nisu dobro instalirani.
    Vaš cdrom uređaj ili cd su neispravni.
    Proverite cdrom na instaliranom kompjuteru koristeće "rpm -qpl Mandrake/RPMS/*.rpm"

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
target: Neki rani i486DX-100 čipovi ne mogu da se pouzdano vrate u operativno stanje posle korišćenja "halt" instrukcije

en: Some steps are not completed.
    
    Do you really want to quit now?
target: Neki koraci nisu kompletirani.
    
    Da li stvarno želite da završite ?

en: Something went wrong! - Is mkisofs installed?
target: Nešto je krenulo naopako! - Da li je mkisofs instaliran?

en: Sorry, no floppy drive available
target: Ti malera, nema diskete

en: Sorry, we support only 2.4 kernels.
target: Žalim, ali podržani su samo 2.4 kerneli.

en: Sound and video playing/editing programs
target: Programi za puštanje zvuka i videa

en: Sound card
target: Zvučna kartica

en: Sound configuration
target: Podešavanje zvuka

en: Sound trouble shooting
target: Pomoć za podešavanje zvuka

en: South Africa
target: Južna Afrika

en: Spain
target: Španija

en: Spanish
target: Španski

en: Specify options
target: Navedite opcije

en: Splash selection
target: Splash selekcija

en: Sri Lanka
target: Šri Lanka

en: Standalone Tools
target: Samostalni Alati

en: Standard
target: Standardni

en: Standard test page
target: Standardna test stranica

en: Start Server
target: Pokreni Server

en: Start at boot
target: Pokreni pri startanju

en: Start sector:
target: Početni sektor:

en: Start: sector %s
target: Početak: sektor %s

en: Started on boot
target: Pokrenuto pri startanju

en: Starting network...
target: Startujem mrežu ...

en: Starting the printing system at boot time
target: Pokreni sistem za štampanje pri staranju sistema

en: Starts the X Font Server (this is mandatory for XFree to run).
target: Pokreće X Font server (potrebno za pokretanje XFree).

en: State
target: Stanje

en: Statistics
target: Statistika

en: Stepping of the cpu (sub model (generation) number)
target: Stepping procesora(podmodel (generacija) broj)

en: Stop Server
target: Zaustavi Server

en: Strategic partners
target: Strateški partneri

en: Sub generation of the cpu
target: Pod generacija za procesor

en: Subnet Mask:
target: Subnet maska:

en: Summary
target: Sažetak

en: Sun - Mouse
target: Sun Miš

en: Support the OKI 4w and compatible winprinters.
target: Podrška za OKI 4w i kompatibilne mu  win štampače.

en: Suppress Fonts Files
target: Zažmi Font fajlove

en: Suppress Temporary Files
target: Sažmi temp fajlove

en: Suriname
target: Surinam

en: Swap partition size in MB:
target: Veličina Swap particije u MB:

en: Swaziland
target: Svazilend

en: Sweden
target: Švedska

en: Swedish
target: Švedski

en: Swiss (French layout)
target: Švajcarski (Francuski  raspored)

en: Swiss (German layout)
target: Švajcarski (Nemački raspored)

en: Switching from ext2 to ext3
target: Menjam ext2 na ext3

en: Switzerland
target: Švajcarska

en: Synchronization tool
target: Alat za sinhronizaciju

en: Syslog
target: Dzyslog

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
target: Syslog je objekat pomoću kog mnogi demoni koriste za logovanje poruka
    u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog.

en: System
target: Sistem

en: System Options
target: Sisitemske opcije

en: System mode
target: Sistemski mod

en: TCP/Socket Printer Options
target: TCP/Socket Opcije Štampača

en: TV card
target: TV katica

en: TV norm:
target: TV sistem :

en: Table
target: Tabela

en: Tajik keyboard
target: Tadžikistanska tastatura

en: Tajikistan
target: Tadžikistan

en: Tape
target: Traka

en: Terminal-based
target: Bazirano na terminalu

en: Test of the configuration
target: Testiranje konfiguracije

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
target: Test stran(ice)a je poslana štampač demonu.
    To može dovesti do malog odlaganja starta štampača.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
target: Test stran(ice)a je poslana štampač demonu.
    To može dovesti do malog odlaganja starta štampača.
    Status štampača:
    %s

en: Test pages
target: Testiranje stranica

en: Testing your connection...
target: Testiranje konekcije...

en: Thai keyboard
target:  Thai tastatura

en: Thailand
target: Tajland

en: Thank you for choosing Mandrake Linux 9.1
target: Hvala vam što ste izabrali Mandrake Linux 9.1

en: The %s is not supported by this version of Mandrake Linux.
target: %s nije podržan u ovoj verziji Mandrake Linux-a.

en: The DHCP end range
target: DHCP kraj raspona

en: The DHCP start range
target: DHCP početak raspona

en: The DNS Server IP
target: DNS server IP

en: The DrakX Partitioning wizard found the following solutions:
target: DrakX čarobnjak za particioniranje je pronašao sledeća rešenja:

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
target: Program za promenu veličine FAT paritcija ne može da upravlja vašom particijom, 
    zbog sledeće greške: %s

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
target: K Desktop okruženje, osnovno grafičko okruženje sa kolekcijom pratećih alata

en: The Local Network did not finish with `.0', bailing out.
target: Lokalna Mreža nije završila sa`.0', bailing out.

en: The MandrakeSecurity range includes the Multi Network Firewall product (M.N.F.)
target: MandrakeSecurity spektar uključuje i Multi Network Firewall proizvod (M.N.F.)

en: The URL must begin with http:// or https://
target: URL mora počinjati sa http:// ili https://

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
target: Auto instalacija može biti potpuno automatizovana ukoliko želite,
    u tom slučaju preuzeće kontrolu nad hard-diskom!!
    (ovo se odnosi na instalaciju na drugoj mašini).
    
    Možda volite da ponovite instalaciju.

en: The backup partition table has not the same size
    Still continue?
target: Pohranjena(snimljena) tabela particija nije iste veličine
    Želite da nastavite ?

en: The change is done, but to be effective you must logout
target: Izmene su završene, ali da bi ih primenili morate se izlogovati

en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card use
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
target: Klasični tester zvuka treba da pokrene sledeće komande:
    
    
    - "lspcidrake -v | fgrep AUDIO" će vam reći koji drajver vaša zvučna kartica koristi 
    po default-u
    
    - "grep sound-slot /etc/modules.conf" će vam reći koji je drajver trenutno
    u upotrebi
    
    - "/sbin/lsmod" će vam omogućiti da proverite da li njegov je drajverov modul
    učitan ili nije
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" će
    vam reći da li su server za zvuk i alsa podešeni za pokretanje u
    initlevel 3
    
    - "aumix -q" će vam reći kakav je nivo jačine zvuka
    
    - "/sbin/fuser -v /dev/dsp" će vam reći koji program koristi dzvučnu karticu.

en: The cpu frequency in Mhz (Mega herz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
target: Frekvencija procesora u Mhz (Mega herz koji u prvoj aproksimaciji može biti smatran za broj instrukcija koje procesor može da izvrši u sekundi)

en: The default lease (in seconds)
target: default puštanje (u sekundama)

en: The encryption keys do not match
target: Nepodudarnost enkripcionih ključeva (lozinki)

en: The entered host/network IP is not correct.
target: Unešena host/mrežna IP adresa nije ispravna.

en: The floppy has been successfully generated.
    You may now replay your installation.
target: Disketa je uspešno kreirana.
    Sada možete ponoviti vašu instalaciju.

en: The following packages are going to be installed
target: Sledeći paketi treba da budu instalirani

en: The following packages are going to be removed
target: Sledeći paketi će biti izbrisani

en: The following packages need to be installed:
target: Sledeći paketi treba da budu instalirani:

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
target: Sledeći paketi će biti uklonjeni da bi sistem mogao da se ažurira: %s
    
    
    Da li zaista želite da uklonite ove pakete?

en: The following printer
    
    %s%s
    are directly connected to your system
target: Sledeći štamačr
    
    %s%s
    je direktno povezan na vaš sistem

en: The following printer
    
    %s%s
    is directly connected to your system
target: Sledeći štamač
    
    %s%s
    je direktno povezan na vaš sistem

en: The following printers
    
    %s%s
    are directly connected to your system
target: Sledeći štamači
    
    %s%s
    su direktno povezani na vaš sistem

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
target: Sledeći štaThe following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org/GIMP.
target: Sledeći štampači su podešeni. Dvokliknite na štampač da bi promenili njegove postavke; da bi ga postavili za default štampač; da bi videli informacije o njemu; ili da bi omogućili štampač na udaljenom CUPS serveru dostupnim za Star/Open Office.

en: The highlighted entry will be booted automatically in %d seconds.
target: Oznaceni izbor se podize automatski za %d sekundi

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
target: Drajveri za inkjet štampače koje je obezbedio Lexmark samo podržavaju lokalne štampače, a ne i štampače na udaljenim mašinama ili print serverima. Povežite vaš štampač na lokalni port ili ga podesite na mašini na koju je povezan.

en: The internal domain name
target: Interno ime domena

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
target: Interent super server demon (znan kao netd) starta 
    razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. elnet, ftp, rsh, i  rlogin.Isključujući njega, isključujete i servise 
    za koje je on odgovoran.

en: The maximum lease (in seconds)
target: Maksimalno puštanje (u sekundama)

en: The model is correct
target: Ovaj model je tačan

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
target: Najčešći način za konekciju sa adsl je pppoe.
    Međutim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.
    Ukoliko ne znate koja je, izaberite 'koristi pppoe'

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
target: Mrežni pristup nije pokrenut i ne može da se startuje. Proverite vašu konfiguraciju i vaše hardverske komponente. Onda probajte ponova da podesite udaljeni štampač.

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
target: Mrežna konfiguracija koja je kreirana tokom instalcije ne može sada da se pokrene. Proverite da li je mreža dostupna nakon restarta sistema i ispravite konfiguraciju koristeći Mandrake CKontrolni Centar, sekcija "Mreža & Internet"/"Konenkcija", i nakon toga podesite štampač, takođe korištenjem Mandrake Kontrolnog Centra, sekcija "Hardver"/"Štampač"

en: The official MandrakeSoft store
target: Zvanični MandrakeSoft market

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
target: Stari "%s" drajver je na crnoj listi.
    
    Prijavljeno je da opstruiše kernel pri restartovanju.
    
    Novi "%s" drajver će biti korišćen samo pri sledećem startanju sistema.

en: The package %s is needed. Install it?
target: Paket %s je potreban. Da li želite da ga instalirate?

en: The package %s needs to be installed. Do you want to install it?
target: Paket %s mora biti instaliran. Da li želite da ga instalirate?

en: The passwords do not match
target: Nepodudarnost lozinki

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
target: per-user deljenje resursa koristi grupu "fileshare". 
    Vi pomoću userdrake-a možete dodati korisnika u ovu grupu.

en: The port number should be an integer!
target: Broj porta bi trebao da bude broj !

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
target: Portmaper uravlja  RPC konekcijama,koje koriste
    protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na mašinama
    koje rade kao serveri za protokole koji koriste RPC mehanizam.

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
target: Štampač "%s" već postoji,
    da li stvarno želite da ponovo upišete njegove opcije?

en: The printer "%s" is set as the default printer now.
target: Štampač  "%s" je sada postavljen kao default štampač.

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
target: Štampač "%s" je uspešno dodan u Star Office/OpenOffice.org/GIMP

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
target: Štampač "%s" je uspešno uklonjen iz Star Office/OpenOffice.org/GIMP-a

en: The printers on this machine are available to other computers
target: Štampači na ovoj mašini su dostupni za ostale računare

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
target: Sistem za štampanje (%s)neće biti automatski pokrenut pri startanju mašine.
    
    Moguće je automatsko startanje isključeno promenom na višlji nivo sigurnosti, zbog toga što je sistem za štampanje primamljiv za napade.
    
    Da li ponovo želite da automatski startujete sistem za štampanje ?

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
target: Routed demon dozvoljava automatsko IP ruter update-ovanje preko
    RIP protokola.Dok se RIP dosta korisiti na malim mrežama,kompleksniji 
     routing protokoli su potrebni za kompleksne mreže.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
target: rstat protokol dozvoljava korisnicima na mreži da omoguće
    merenje performansi za bilo koju mašinu na toj  mreži.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
target: rusers protokol omogućava korisnicima na mreži da otkriju ko je
    ulogovan na drugim mašinama.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
target: rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih
    korisnika ulogovanih na sistem sa pokrenutim rwho demonom (slično finger-u).

en: The setup has already been done, and it's currently enabled.
target: Podešavanje deljenja internet konekcije je već završeno i trenutno je omogućeno.

en: The setup has already been done, but it's currently disabled.
target: Podešavanje deljenja internet konekcije je već završeno ali je trenutno onemogućeno.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
target: Podešavanje deljenja internet konekcije je već završeno.
    Trenutno je omogućeno.
    
    šta želite da uradite?

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work on the part of the worldwide Linux Community
target: Uspeh MandrakeSoft-a je zasnovan na principu Besplatnog Softvera. Vaš novi operativni sistem je rezultat kolaborativnog rada sa delom svetske Linux Zajednice

en: The training program has been created to respond to the needs of both end users and experts (Network and System administrators)
target: Program edukacije je kreiran da odgovori potrebama korisnika i eksperata (mrežnih i sistemskih administratora(

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
target: Morate da navedete horizontalni sinhronizacioni opseg vašeg monitora.
    Možete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju
    industrijskim standardima monitora, ili da navedete određeni opseg.
    
    VEOMA JE VAŽNO da ne navedete tip monitora koji ima ovaj opseg veći nego
    što ga ima vaš monitor. Ako niste sigurni, odaberite manje vrednosti.

en: The type of bus on which the mouse is connected
target: Tip busa na koji je vaš miš priključen.

en: The user name is too long
target: Korisničko ime već je predugačko

en: The user name must contain only lower cased letters, numbers, `-' and `_'
target: Korisničko ime može sadržati samo mala slova, brojeve, `-' i `_'

en: Theme installation failed!
target: Instalacija teme nije uspela!

en: Theme name
target: Ime teme

en: Themes
target: Teme

en: There are already some restrictions, and more automatic checks are run every night.
target: Već postoje neka ograničenja, a više automatskih provera se pokreće svake noći.

en: There are no printers found which are directly connected to your machine
target: Nema štampača koji su direktno povezani na vašu mašinu

en: There is already a partition with mount point %s
target: Već postoji particija sa tačkom montiranja %s

en: There is no existing partition to use
target: Nema ni jedne pariticije za rad

en: There is no medium or it is write-protected for device %s.
    Please insert one.
target: Medij nije prisutan, ili je zaštićen oid upisa za uređaj %s.
    Molim vas da ga ubacite.

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
target: Postoji samo jedan konfigurisan mrežni adapter na vašem sistemu:
    
    %s
    
    Sada podeavam vašu lokalnu mrežu sa ovim adapterom.

en: There was an error installing packages:
target: Greška pri instalaciji paketa:

en: There was an error ordering packages:
target: Greška u listi paketa:

en: There was an error while scanning for TV channels
target: Greška pri skeniranju TV kanala

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
target: Ne postoji poznati alternativni OSS/ALSA drajver za vašu zvučnu karticu (%s) koja trenutno koristi "%s"

en: There's no known driver for your sound card (%s)
target: Ne postoji poznati drajver za vašu zvučnu karticu (%s)

en: These are the machines and networks on which the locally connected printer(s) should be available:
target: Ovo su mašine i mreže na kojima se nalaze lokalno povezani štamač(i) koji bi trebali biti dostupni:

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
target: Ove komande takođe možete koristiti u polju "Komande za štampanje" dijaloga za štampanje u većem broju aplikacija, ali ovde nemojte da određujete ime fajla jer njega postavlja sama aplikacija iz koje štampate.

en: These options can backup and restore all files in your /etc directory.
target: Ove opcije mogu sačuvati i kasnije obnoviti sve fajlove u vašem /etc direktorijumu.

en: Thin Client
target: Thin klijent

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
target: Ova komanda vam je dostupna i u polju "Konade za štampanje" dijaloga za štampanje u većini aplikacija. Ali u tom slučaju nemojte da upisujete ime fajla jer je ono već dodeljeno od strane aplikacije.

en: This directory should remain within the root filesystem
target: Ovaj direktorijum treba da ostane u root-u  datotečnog sistema

en: This encryption key is too simple (must be at least %d characters long)
target: Ova lozinka(enkripcioni ključ) je suviše jednostavna (treba da ima bar %d znakova)

en: This field describes the device
target: Ovo polje opisuje uređaj

en: This firewall product includes network features that allow you to fulfill all your security needs
target: Ovaj firewall proizvod uključuje mrežne funkcije koje vam omogućavaju da upotpunite sve svoje sigurnosne potrebe

en: This floppy is not FAT formatted
target: Ova disketa nije formatirana sa FAT sistemom

en: This host/network is already in the list, it cannot be added again.
target: Ovaj host/mreža već postoji na listi, i ne može se ponovo dodati.

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
target: Ovaj interfejs još uvek nije podešen.
    Pokrenite konfiguracionog čarobnjaka u glavnom prozoru

en: This is HardDrake, a Mandrake hardware configuration tool.
    Version:
target: Ovo je HardDrake, Mandrake-ov alat za podešavanje hardvera.
    Verzija:

en: This is a mandatory package, it can't be unselected
target: Ovo je obavezni paket,i ne može biti deselektovan

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
target: Ovo je slično prethodnom nivou, ali je sada sistem potpuno zatvoren i sigurnosne opcije su maksimalne.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
target: Ovo je standardno sigurnosno okruženje preporučeno za računare koji  će biti  koršćeni za vezu sa Internetom ili kao klijent.

en: This label is already used
target: Ova oznaka je već u upotrebi

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
target: Na ovom nivou treba obratiti pažnju. On pravi vaš sistem lakšim
    za upotrebu, ali i  veoma osetljivim: ne sme biti korišten na mašini
    koja je povezana sa drugim mašinama ili na internet. Ovde ne postoji
    pristup sa lozinkom.

en: This may take a moment to erase the media.
target: Brisanje medija može da potraje manje vremena.

en: This may take a moment to generate the keys.
target: Generisanje tastera može da potraje par trenutaka.

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
target: Ovaj paket aktivira odabranu mapu tastature kako je podešeno 
    u  /etc/sysconfig/keyboard.Ovo se podešava koristeći kbdconfig alatku.
    Treba da bude uključen na većinu mašina.

en: This package must be upgraded.
    Are you sure you want to deselect it?
target: Ovaj paket mora biti ažuriran
    Da li sigurno želite da ga deselektujete ?

en: This partition can't be used for loopback
target: Ova particija ne može biti korišćena za loopback

en: This partition is not resizeable
target: Ovoj particici nije moguće promeniti veličinu

en: This password is too short (it must be at least %d characters long)
target: Ova lozinka je suviše jednostavna (treba da ima bar %d znakova)

en: This password is too simple
target: Ova lozinka je previše prosta

en: This product is available on MandrakeStore website
target: Ovaj proidzvod je dostupan na MandrakeStore veb sajtu

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
target:  Ovaj program je bespaltan; možete ga redistribuirati i/ili menjati
     pod uslovima GNU General Public License kako je objavljeno
     u Free Software Fondaciji; ili verziji 2, ili (u vašem slučaju)
     bilo kojoj novijoj verziji.
    
     Ovaj program je distribuiran u nadi da će biti od koristi,
     sli BEZ IKAKVIH GARANCIJA; čak i bez garancije za
     KORISNOST i PRAKTIČNU UPOTREBU.  Pogledajte
     GNU Opštu Javnu Licencu za više detalja.
    
     Trebali bi da mate kopiju GNU Opšte Javne  Licence
     zajedno sa ovim programom; ukoliko je nemate, pišite nam na adresu Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: This theme does not yet have a bootsplash in %s !
target: Ova tema nema nijedan bootsplash u %s !

en: This user name has already been added
target: Ovo korisničko ime već postoji

en: This will take a few minutes.
target: Ovo će potrajati nekoliko minuta.

en: Time remaining
target: Preostalo vreme

en: Timezone
target: Vremenska zona

en: Title
target: Naziv

en: To activate the mouse,
target: Da bi mogli da aktivirate miša

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
target: Da bi mogli da štampate na vašem Lexmark inkjet štampaču morate da imate drajvere koje je kreirao Lexmark (http://www.lexmark.com/).Kliknite na taster "Drajveri".  nakon toga izaberite vaš model i operativni sistem, u vašem slučaju "Linux". Drajveri su upakovani u RPM pakete ili shell skripte sa interaktivnom grafičkom instalacijom. Ne morate da dradite ovu konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o licenci. Onda ištampajte printhead alignment stranice sa "lexmarkmaintain" a podesite opcije za položaj glave sa ovim programom.

en: To get a list of the options available for the current printer click on the "Print option list" button.
target: Da bi dobili listu dostupnih opcija za trenutni štampač kliknite na taster "Lista opcija štampača".

en: To have more partitions, please delete one to be able to create an extended partition
target: Da bi omogućili kreiranje još (extended) particija izbrišite jednu od postojećih

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s
target: Da bi znali koje su vam opcije dostupne za tekući štampač pročitajte listu koja je dole prikazana ili kliknite na taster "Listu opcija za štampanje".%s%s

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
target: Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu "%s <fajl>" ili "%s <fajl>".

en: To print a file from the command line (terminal window) use the command "%s <file>".
target: Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu "%s <fajl>".

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
target: Da bi štampali fajl iz komandne linije (ili prozora terminala) možete ili koristiti komandu "%s <fajl>" ili prafički alat za štampanje: "xpp <fajl>" ili "kprinter <fajl>". Grafički alati vam dozovoljavaju da izaberete štampač i izmenite opcije veoma lako.

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
target: Da biste mogli da štampate na NetWare štampač, treba da navedete ime  NetWare servera za štampač (koje nije uvek isto kao TCP/IPhostname! );te  ime 'reda' štampača kome pristupate,kao i potrebna korisnička imena i lozinke.

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
target: Da biste mogli da štampate na SMB štampaču, treba da navedete
    ime hosta (koje nije uvek isto kao TCP/IP ime mašine);
    IP adresu štampačevog servera; deljeno ime štampača kome pristupate,
    kao i potrebna korisnička imena i lozinke.

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
target: Da bi štampali na TCP ili socket štampač, morate da obezbedite ime hosta ili IP štampača te (opcija) broj porta (default je 9100). Na HP JetDirect serverima broj porta je obično 9100, a na drugim serverima može biti drugačiji. Pogledajte upustvo koje ste dobili uz hardver.

en: To share your own knowledge and help build Linux tools, join the discussion forums you'll find on our "Community" webpages
target: Da bi podelili vaše znanje i pomogli u razvoju Linux alata, pridružite se diskusionim forumima koje možete pronaći na našim "Community" veb stranicama

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
target: Da bi koristili udaljeni lpd štampač, morate da obezbedite ime hosta za server za štampanje kao i ime štampača na tom serveru.

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
target: Da bi koristili ovaj izbor za čuvanje selekcije paketa, izaberite instalaciju sa ``linux defcfg=floppy''

en: Toggle between flat and group sorted
target: Birajte: ravno ili grupno sortirano

en: Toggle to expert mode
target: Pređi na ekspert mod

en: Toggle to normal mode
target: Pređi na normalni mod

en: Tools for your Palm Pilot or your Visor
target: Alati za Palm Pilot ili Visor

en: Tools to create and burn CD's
target: Alati za kreiranje i prženje CDa

en: Tools to ease the configuration of your computer
target: Alati za lako konfigurisanje kompjutera

en: Total Progress
target: Ukupni napredak

en: Total progess
target: Ukupan napredak

en: Total size: %d / %d MB
target: Ukupna veličina: %d / %d MB

en: Track network card id (useful for laptops)
target: Track mrežna kartica id (korisno za laptop računare)

en: Transfer
target: Prebaci

en: Transfer printer configuration
target: Konfiguracija za transfer štampača

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
target: Transfer je bio uspešan
    Ako želite da porverite možete se prijaviti na server sa:
    
    ssh -i %s %s\@%s
    
    bez traženja lozinke.

en: Transferring %s...
target: Transferišem %s ...

en: Transform your machine into a powerful Linux server with a few clicks of your mouse: Web server, mail, firewall, router, file and print server, ...
target: Pretvorite svoju mašinu u moćni Linux server sa samo nekoliko poteza mišem:  Veb server, email, firewall, ruter, fajl server, server za šampanje, ...

en: Trinidad and Tobago
target: Trinidad i Tobago

en: Trouble shooting
target: Pomoć

en: True Type fonts installation
target: Instalacija True Type fontova

en: True Type install done
target: Instalacija True Type fontova završena

en: Truly minimal install (especially no urpmi)
target: Stvarno minimalna instalacija (posebno bez urpmi)

en: Trying to rescue partition table
target: Spasavanje tabele particija

en: Tuner type:
target: Tip tjunera :

en: Tunisia
target: Tunis

en: Turkey
target: Turska

en: Turkish (modern "Q" model)
target: Turski (moderni "Q" model)

en: Turkish (traditional "F" model)
target: Turski (tradicionalni "F" model)

en: Turn your machine into a reliable server
target: Pretvorite svoju mašinu u pouzdan server

en: Type
target: Tip

en: Type of install
target: Tip instalacije

en: Type:
target: Tip:

en: Type:
target: Unesi:

en: UK keyboard
target: UK tastatura

en: URL should begin with 'ftp:' or 'http:'
target: Url treba da počinje 'ftp:' ili 'http:'

en: US keyboard
target: US tastatura

en: US keyboard (international)
target: US tastatura (internacionalna)

en: USA (cable)
target: SAD (kabl)

en: USA (cable-hrc)
target: SAD (kabl-hrc)

en: USB printer \#%s
target: USB štampač \#%s

en: Ukraine
target: Ukrajina

en: Ukrainian
target: Ukrajinski

en: Unable to fork: %s
target: Ne mogu da forkujem: %s

en: Unable to properly close mkbootdisk: 
     %s 
     %s
target: Ne mogu korektno da zatvorim mkbootdisk: 
     %s 
     %s

en: Unable to start live upgrade !!!
target: Ne mogu da startujem live upgrade !!!

en: Under Devel ... please wait.
target: U razvoju ... molim Vas sačekajte

en: Undo
target: Poništi radnju

en: Uninstall Fonts
target: Deinstaliraj fontove

en: United Arab Emirates
target: Ujedinjeni Arapski Emirati

en: United Kingdom
target: Velika Britanija

en: United States
target: SAD

en: Unknown Model
target: Nepoznati Model

en: Unknown model
target: Nepoznati model

en: Unknown|CPH05X (bt878) [many vendors]
target: Nepoznati|CPH05X (bt878) [mnogi proizvođači]

en: Unknown|CPH06X (bt878) [many vendors]
target: Nepoznati|CPH06X (bt878) [mnogi proizvođači]

en: Unknown|Generic
target: Nepoznati|Generic

en: Unkown driver
target: Nepoznati drajver

en: Unmount
target: Demontiraj

en: Unsafe
target: Nesigurno

en: Unselect fonts installed
target: Deselektovani fontovi instalirani

en: Unselected All
target: Deselektuj Sve

en: Up
target: gore

en: Updating package selection
target: Ažuriranje selekcije paketa

en: Uruguay
target: Urugvaj

en: Use CD/DVDROM to backup
target: Koristi CD/DVDROM za backup

en: Use Expect for SSH
target: Koristi Expect za SSH

en: Use Hard Disk to backup
target: Koristi Hard Disk za backup

en: Use Incremental Backups  (do not replace old backups)
target: Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)

en: Use Xinerama extension
target: Koristi Xinerama ekstenziju

en: Use ``%s'' instead
target: Umesto toga probajte ``%s''

en: Use ``Unmount'' first
target: Prvo uradite ``Demontiraj''

en: Use auto detection
target: Koristi auto detekciju

en: Use daemon
target: Koristi demon

en: Use existing partitions
target: Koristi postojeću particiju

en: Use fdisk
target: Koristi fdisk

en: Use for loopback
target: Koristi za loopback

en: Use free space
target: Koristi slobodan prostor

en: Use group id for execution
target: Koristi id grupe za izvršavanje

en: Use incremental backup  (do not replace old backups)
target: Koristi Inkrementalni Backup  (ne zamenjuj ih sa starim backup-ima)

en: Use libsafe for servers
target: Koristi libsafe za servere

en: Use network connection to backup
target: Korisiti mrežnu konekciju za backup

en: Use owner id for execution
target: Koristi id vlasnika za izvršavanje

en: Use quota for backup files.
target: Koristi quota zar backup fajlove

en: Use tape to backup
target: Koristi traku za backup

en: Use the %c and %c keys for selecting which entry is highlighted.
target: Koristi  %c i %c slova da bi oznacili izbor

en: Use the Windows partition for loopback
target: Koristi Windows particiju za loopback

en: Use the free space on the Windows partition
target: Korisiti slobodan prostor na Windows particiji

en: Use the full power of the GNU gcc 3 compiler as well as the best Open Source development environments
target: Iskoristite snagu GNU gcc 3 kompajlera kao i najboljih Open Source razvojnih okruženja

en: Used for directory:
     only owner of directory or file in this directory can delete it
target: Korišćeno z direktorijum:
     samo vlasnik direktorijuma ili fajla u ovom direktorijumu ga može izbrisati

en: User
target: Korisnik

en: User interfaces
target: Korisnički interfejsi

en: User list to restore (only the most recent date per user is important)
target: Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su važni)

en: User name
target: Korisničko ime

en: Username
target: Korisničko ime

en: Username required
target: Potrebno je Korisničko ime

en: Users
target: Korisnici

en: Various
target: Razno

en: Vendor
target: Proizvođač

en: Venezuela
target: Venecuela

en: Version: %s
target: Verzija: %s

en: Vertical refresh rate
target: Vertikalna frekvencija

en: Video mode
target: Video mod

en: Video players and editors
target: Video plejeri i editori

en: Vietnamese "numeric row" QWERTY
target: Vijetnamski  "number row"QWERTY

en: View Backup Configuration.
target: Pogledaj Backup Konfiguraciju.

en: Virgin Islands (British)
target: Devičanska Ostrva(V.Britanija)

en: Virgin Islands (U.S.)
target: Devičanska Ostrva (S.A.D)

en: WARNING
target: UPOZORENJE

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful:
    this operation is dangerous. If you have not already done
    so, you should first exit the installation, run scandisk
    under Windows (and optionally run defrag), then restart the
    installation. You should also backup your data.
    When sure, press Ok.
target: UPOZORENJE!
    
    DrakX treba da izmeni veličinu Windows particije. Budite pažljivi: ova
    operacija je opasna. Ukoliko to do sada niste radili, prvo treba da izađete
    iz instalacije,pokrenete pod Windows-om
    scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.
    Ako ste sigurni, pritisnite OK (U redu).

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
target: Upozorenje: Ovaj uređaj je već prethodno konfigurisan za konektovanje na Internet.
    Samo prihvaitite da bi postavku ostavili istom.
    Izmena polja koje vidite će poništiti postojeću konfiguraciju.

en: Wait please
target: Molim Vas sačekajte

en: Wait please, testing your connection...
target: Molim Vas sačekajte, testiram vašu konekciju...

en: Want to know more about the Open Source community?
target: Da li želite da saznate više o Open Source zajednici?

en: Warning
target: Upozorenje

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
target: Upozorenje ! Postojeća firewalling konfiguracija je detektovana. Moždaće biti potrebno ručno podešavanje nakon instalacije.

en: Warning, another Internet connection has been detected, maybe using your network
target: Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu mrežu

en: Warning, another internet connection has been detected, maybe using your network
target: Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu mrežu

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
target: Upozorenje, mrežni adapter (%s) ije već podešen.
    
    Da li želite da ga automatski prekonfigurišete?
    
    Možete to učiniti ručno ali morate da znate šta radite.

en: Warning: testing this graphic card may freeze your computer
target: Upozorenje: testiranje ove grafičke kartice može blokirati vaš računar

en: We are now going to configure the %s connection.
target: Sada treba da podesimo %s konekciju.

en: Web Server
target: Veb Server

en: Web/FTP
target: Server, Web/FTP

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
target: WebDAV je protokol koji vam omogućava da montirate direktorijum veb servera
    lokalno, i da ga tretirate kao lokalni fajl sistem (dostupni veb server je
    podešen kao WebDAV server). Ukoliko želite da dodate novu WebDAV tačku
    montiranja, izaberite "Novi".

en: WebDAV remote site already in sync!
target: WebDAV udaljeni sajt je već u sync!

en: WebDAV transfer failed!
target: WebDAV transfer nije uspeo!

en: Webmin Service
target: Webmin Servis

en: Welcome To Crackers
target: Dobrošli kod Krakera

en: Welcome to %s
target: Dobrošli u  %s

en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
target: Dobrodosli u %s, menadzer za startanje operativnih sistema !
    
    Izaberite operativni sistem, ili
    sacekate %d sekundi za startanje pretpostavljenog OS.

en: Welcome to GRUB the operating system chooser!
target: Dobrodosli u GRUB  starter operativnog sistema !

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
target: Dobrodošli u program za Podešavanje Mrežne konekcije
    
    Sada treba da konfigurišemo vašu internet/mrežnu konekciju.
    Ukoliko ne želite auto detekciju, deselektujte opciju.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
target: Dobrodošli u alat za podešavanje Deljenja Internet konekcije
    %s
    
    Kliknite na Podesi (Configure) da bi pokrenuli podešavanje.

en: Welcome to the Open Source world
target: Dobrodošli u Svet Open Source-a

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
target: Dobrodošli u alat za konfiguraciju el.pošte
    
    Ovde možete da podesite alarmni sistem.

en: West Europe
target: Zapadna Evropa

en: Western Sahara
target: Zapadna Sahara

en: What
target: Šta

en: What kind is your ISDN connection?
target: Kakva je vrsta vaše ISDN kenekcije ?

en: What kind of card do you have?
target: Kakvu vrstu kartice imate?

en: What norm is your TV using?
target: Kakav sistem vaš TV koristi?

en: What type of partitioning?
target: Koju vrstu particioniranja?

en: Wheel
target: Točkić

en: When
target: Kada

en: Where
target: Gde

en: Where do you want to install the bootloader?
target: Gde biste da instalirate starter?

en: Where do you want to mount %s?
target: Gde biste da montirate %s uređaj ?

en: Where do you want to mount device %s?
target: Gde biste da montirate %s uređaj ?

en: Whether the FPU has an irq vector
target: Gde god FPU ima irq vektor

en: Whether this cpu has the Cyrix 6x86 Coma bug
target: Da li ovaj procesor ima Cyrix 6x86 Coma bag

en: Whether you choose to teach yourself online or via our network of training partners, the Linux-Campus catalogue prepares you for the acknowledged LPI certification program (worldwide professional technical certification)
target: Bilo da izaberete sa dami učite online ili preko naše mreže partnera za edukaciju, Linux-Campus katalog vas priprema za priznati LPI certifikovani program (svetska profesionalna tehnička sertifikacija)

en: Which %s driver should I try?
target: Koji %s drajver da probam?

en: Which ISDN configuration do you prefer?
    
    * The Old configuration uses isdn4net. It contains powerful
      tools, but is tricky to configure, and not standard.
    
    * The New configuration is easier to understand, more
      standard, but with less tools.
    
    We recommand the light configuration.
target: Koju ISDN konfiguraciju više preferirate?
    
    * Stara kofiguracja koristi isdn4net. Ona sadrži mođne alatke, ali je
      problematična za podešavanje pogotovo za početnike, i nije uobičajena.
    
    * Nova konfiguracija je jednostavnija za razumeti, standardnija,
      ali sa manje opcija i alata.
    
    Mi preporučujemo lakšu (jednostavniju) konfiguraciju.

en: Which configuration of XFree do you want to have?
target: Koju XFree konfiguraciju želite da imate ?

en: Which dhcp client do you want to use?
    Default is dhcp-client.
target: Kog dhcp klijenta želite da koristite ?Postavljeni je dhcp-client

en: Which disk do you want to move it to?
target: Koji disk želite da premestite?

en: Which filesystem do you want?
target: Koju  datotečni sistem želite ?

en: Which is your timezone?
target: Koja je vaša vremenska zona ?

en: Which partition do you want to resize?
target: Kojoj particiji  želite da promenite veličinu?

en: Which partition do you want to use for Linux4Win?
target: Koju particiju želite da korisite za Linux4Win?

en: Which printer model do you have?
target: Koju model štampača imate?

en: Which printing system (spooler) do you want to use?
target: Koji sistem za štampanje (spooler) želite da koristite ?

en: Which protocol do you want to use?
target: Koji protokol želite da koristite ?

en: Which sector do you want to move it to?
target: Gde želite da instalirate starter?

en: Which services would you like to allow the Internet to connect to?
target: Koji servise želite da budu dostupni preko Inerneta?

en: Which size do you want to keep for Windows on
target: Koju veličinu želite da zadržite za prozore

en: Which type of entry do you want to add?
target: Koju vrstu unosa dodajete ?

en: Which username
target: Koje korisničko ime

en: Windows (FAT32)
target: Windows(FAT32)

en: Windows Domain
target: Windows Domen

en: Windows Migration tool
target: Alat za prelazak za Windows-a

en: Winmodem connection
target: Winmodem konekcija

en: With X
target: Sa X-ovima

en: With basic documentation (recommended!)
target: Sa osnovnom dokumentacijom (preporuka!)

en: With this option you will be able to restore any version
     of your /etc directory.
target: Sa ovom opcijom moći ćete da obnovite bilo koju verziju
     vašeg /etc direktorijuma.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
target: Sa ovim sigurnosnim nivoom, korišćenje ovog sistema kao servera postaje moguće.
    Sigurnost je sada dovoljno velika za korišćenje mašine za server koji prihvata
    konekcije brojnih klijenata. Napomena: ukoliko je vaša mašina samo klijent na Internetu, trebali bi da izaberete niži nivo.

en: Wizard
target: čarobnjak (pomoćnik)

en: Wizard Configuration
target: Čarobnjak Konfiguracija

en: Wizard...
target: Čarobnjak...

en: Workgroup
target: Radna grupa(Workgroup):

en: Workstation
target: Radna stanica

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
target: Da li bi želeli da dozvolite korisnicima zajednički dele neke od svojih direktorijuma?
    Da bi ovo mogli da omogućite jednostavno kliknite na "Share" u konqueror-u ili nautilus-u.
    
    "Custom" dozvoljava detaljnija per-user podešavanja.

en: Write %s
target: Upiši %s

en: Write Config
target: Sačuvaj Konfiguraciju

en: XFree %s with 3D hardware acceleration
target: XFree %s sa 3D hardverskom akceleracijom

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
target: XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom

en: XFree configuration
target: XFree konfiguracija

en: XFree86 driver: %s
target: XFree86 drajver: %s

en: XawTV isn't installed!
target: XawTV nije instaliran!

en: XawTV isn't installed!
    
    
    If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134
    module in "/etc/modules") nor installed xawtv, please send the
    results of "lspcidrake -v -f" to "install\@mandrakesoft.com"
    with subject "undetected TV card".
    
    
    You can install it by typing "urpmi xawtv" as root, in a console.
target: XawTV nije instaliran!
    
    
    Ukoliko imate TV karticu ali je DrakX nije detektovao (bez bttv ili
    saa7134 modula u "/etc/modules") niti je instalirao xawtv, molim vas da pošaljete
    rezultate od "lspcidrake -v -f" na "install\@mandrakesoft.com"
    sa subjektom "undetected TV card".
    
    
    Nožete ga instalirati ukucavanjem "urpmi xawtv" kao root, u konzoli.

en: Xinetd Service
target: Xinetd Servis

en: Xpmac (installation display driver)
target: Xpmac (Instalacija displej drajver)

en: Yaboot mode
target: Yaboot mod

en: Yemen
target: Jemen

en: Yes
target: Da

en: Yes, I want autologin with this (user, desktop)
target: Da, ja želim autologovanje sa ovim(korisnik,desktop)

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
target: Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle iopasna i mora se pažljivo koristiti.
    
    Sa ovom opcijom, moći ćete da ponovite instalaciju koju steizveli na ovom računaru, sa povremenim upitima u cilju izmene određenih vrednosti parametra.
    
    RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada neće biti izvođeno automatskiy, bez obzira šta izabrali tokom instalacije na ovom računaru.
    
    Da li želite da nastavite?

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Vaš računar možete podesiti za deljenje njegove Internet konekcije.
    sa ovom opcijom, drugi kompjuteri na vašoj lokalnoj mreži će moći da koristeInternet konekciju sa ovog računara.
    
    Proverite da li je podešena vaša Mrežni/Internet pristup preko drakconnect pre nego što nastavimo.
    
    Napomena: potrebana vam je mrežna kartica da bi podesili lokalnu mrežu(LAN).

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
target: Sada treba da instalirate sistem za štampanje %s na sistemu koji se nalazi u %s sigurnosnom nivou.
    
    Ovaj sistem za štampanje pokreće demon (pozadinski proces) koji čeka na poslove štampanja i upravlja njima. Ovaj demon je takođe dostupan preko udaljenih mašina preko mreže pa je time podložan napadima. Zbog toga samo par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.
    
    Da li stvarno želite da podesite štampanje na ovoj mašini?

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
target: Upravo treba da podesite štampanje na Windows računu sa lozinkom. Usled greške u arhitekturi Samba klijent softvera lozinka se ostavlja u običnom tekstu u komandnoj liniji Samba klijenta koji se koristi za prenošenje poslova štamapča na Windows server. Tako je moguće da svaki korisnik na ovoj mašini prikaže lozinku na ekranu koristeći se komandom  "ps auxwww".
    
    mmi vam preporučujemo da koristite jednu od sledećih alternativa (sve u slučaju da ste sigurni da samo mašine sa vaše lokalne mreže mogu pristupiti vašem Windows serveru, recimo u smislu firewall-a):
    
    Koristite račun bez lozinke na vašem Windows serveru, kao "GUEST" račun ili specijalan račun kreran za štampanje. Nemojte da uklanjate zaštitu lozinkesa ličnih računa ili računa administratora.
    
    Podesite vaš Windows server da napravi štampače dostupnim  pod LPD protokolom. Zatim podesite štampanje sa ove mašine sa "%s" tipom konekcije u Printerdrake-u.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
target: Treba da podesite  OKI laserski win štampač. Ovi štampači
    koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade samo kada su povezani na prvi paralelni port. Kada je vaš štampač povezan na drugi port ili na server povežite štampač na prvi paralelni port pre nego ištampate test stranicu ili vaš štampač neće raditi. Postavke za vaš tip konekcije će biti ignorisane od strane drajvera.

en: You are currently connected to the Internet.
target: Trenutno ste konektovani na Internet

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
target: Trenutno koristite %s kao Boot menadžer 
    Kliknite na Podesi (Configure) da bi pokrenuli podešavavanje.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
target: Treba da podesite udaljeni štampač. Za to vam je potreban mrežni pristup, ali vaša mreža nije još podešena. Ukoliko nastavite bez mreže konfiguracije, nećete moći da koristite štampač koji sada podešavate. Kako želite da nastavite?

en: You are not currently connected to the Internet.
target: Trenutno niste konektovani na Internet

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
target: Takođe možete odlučiti da li želite da štampači na udaljenim mašinama budu automatski dostupni na ovoj mašini.

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
target: Takođe možete da koristite i grafički interfejs "xpdq" za opcije za podešavanje poslova štampanja.
    Ako koristite KDE kao desktop okruženje imate "panično dugme", ikonicu na desktopu, označenu sa "ZAUSTAVI Štampač!",koji zaustavlja sve poslove štampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se zaglavi papir.

en: You can configure each parameter of the module here.
target: Ovde možete podesiti svaki parametar modula.

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
target: Možete kopirati konfiguraciju štampača koju ste završili za spooler %s to %s, vaš trenutni spooler. Svi konfiguracioni podaci (ime štampača, opis, lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i poslovi štampanja.
    Ni svi queues ne mogu biti prebačeni zbog sledećih razloga:

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
target: Možete uneti različite portove. 
    Ispravni primeri su: 139/tcp 139/udp.
    Pogledajte /etc/services za informaciju.

en: You can export using NFS or Samba. Please select which you'd like to use.
target: Možete eksportovati koristeći NFS ili Samba-u. Koji od ova dva želite

en: You can now partition %s.
    When you are done, don't forget to save using `w'
target: Sada možete particionirati vaš %s hard disk uređaj
    Kada završite,ne zaboravite da potvrdite koristeći `w'

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
target: Možete direktno odrediti URI za pristup štampaču. URI mora ispunjavati ili CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podržani.

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
target: Vi ne možete da kreirate novu particiju
    (pošto ste dosegli maksimalan broj primarnih particija).
    Prvo uklonite primarnu particiju a zatim kreirajte extended particiju.

en: You can't install the bootloader on a %s partition
target: Ne možete da instalirate starter na particiju %s

en: You can't select this package as there is not enough space left to install it
target: Ne možete selektovati ovaj paket jer nema više slobodnog prostora

en: You can't select/unselect this package
target: Ne možete selektovati/deselektovati ovaj paket

en: You can't unselect this package. It is already installed
target: Možete deselektovati ovaj paket jer je već instaliran

en: You can't unselect this package. It must be upgraded
target: Ne možete deselektovati ovaj paket.On mora biti ažuriran

en: You can't use JFS for partitions smaller than 16MB
target: Ne možete koristiti JFS za particije manje od 16MB

en: You can't use ReiserFS for partitions smaller than 32MB
target: Ne možete koristiti ReiserFS za particije manje od 32MB

en: You can't use a LVM Logical Volume for mount point %s
target: Ne možete koristiti logičku LVM particiju za tačku montiranja %s

en: You can't use an encrypted file system for mount point %s
target: Ne možete koristiti enkriptovani fajl sistem za tačku montiranja %s

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
target: Vi ste odlučili da instalirate starter na particiju.
    Ovo ukazujen ato da već imate instaliran starter na hard disku koji butujete.
    
    Na koji drajv se butujete?

en: You don't have a swap partition.
    
    Continue anyway?
target: Hm, nema swap particije
    
    Svejedno nastaviti dalje ?

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
target: Vi nemate ni jednu podešenu Internet konekciju.
    Kreirajte je klikom na 'Configure'

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
target: Vi nemate ni jedan interfejs koji je podešen.
    Morate ih prvo podesite klikom na 'Configure'

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
target: Imate prazninu u vašoj tabeli particija ali je ne mogu korisiti.
    Jedino rešenje je da pomerite primarnu particiju tako da praznina bude
    do extended particija

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
target: Vi ste podesili više načina za konektovanje na Internet.
    Izaberite jedan od njih koji želite da koristite.

en: You have more than one hard drive, which one do you install linux on?
target: Imate više od jednog hard diska, na koji od njih želite da instalirate Linux ?

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
target: Prebacili ste svoj bivši default štampač ("%s"), Da li treba da bude ponovo default štampač pod novim sistemom za štampanje %s?

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
target: Niste selektovali nijednu grupu paketa.
    Izaberite minimalnu instalaciju koju želite:

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
target: Moraćete da promenite Open Firmware boot-uređaj da 
     bi mogli da koristite starter.  Ukoliko ne vidite prompt
     pri restartu držite Command-Option-O-F pri startanju i unesite:
     setenv boot-device %s,\\:tbxi
     Onda ukucajte: shut-down
    Kada sledeći put startujete mašinu trebali bi da vidite staterov prompt.

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
target: Sada možete da ubacite njegove opcije u modul %s.
    Zapamtite da svaka adresa treba da se unosi sa prefiksom 0x kao npr. '0x123'

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
target: Možete navesti njegove opcije za modul %s.
    Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.
    Na primer, ``io=0x300 irq=7''

en: You must also format %s
target: Morate i %s da formatirate

en: You must choose an image file first!
target: Morate izabrati prvo sliku!

en: You must choose/enter a printer/device!
target: Morate iabrati/uneti štampač/uređaj!

en: You must enter a device or file name!
target: Morate uneti uređaj ili ime fajla!

en: You must have a FAT partition mounted in /boot/efi
target: Morate imati FAT particiju montiranu u /boot/efi

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
target: Morate imati  root particiju.
    Za ovo, kreirajte particiju (ili kliknite na postojeću).
    Zatim izaberite "Tačka montiranja" i podesite na `/'

en: You must specify a kernel image
target: Morate specificirati kernelov image

en: You must specify a root partition
target: Morate odrediti root particiju

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
target: Potreban vam je pravi datotečni sistem (ext2/ext3, reiserfs, xfs, ili jfs) za ovu tačku montiranja

en: You need the alcatel microcode.
    Download it at
    http://www.speedtouchdsl.com/dvrreg_lx.htm
    and copy the mgmt.o in /usr/share/speedtouch
target: Vama je potreban alcatel mikro mod.
    MOžete ga Download-ovati sa
    http://www.speedtouchdsl.com/dvrreg_lx.htm
    and copy the mgmt.o in /usr/share/speedtouch

en: You need to reboot for the partition table modifications to take place
target: Treba da resetujete mašinu za primenu izmena u tabeli particija

en: You will receive an alert if the load is higher than this value
target: Oglasiće se alarm ukoliko je učitano veće od ove vrednosti

en: You'll need to reboot before the modification can take place
target: Morate restartovati računar da bi se izmene izvršile

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
target: Vaša Windows particija je previše fragmentirana, prvo pokrenite ``defrag''

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,
    ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do blokiranja računara.
    Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D.

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s.
    Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D.

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
target: Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,
    ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do blokiranja računara.

en: Your card can have 3D hardware acceleration support with XFree %s.
target: Vaša kartica može imati 3D hardversku akceleraciju sa XFree %s.

en: Your choice? (0/1, default `%s')
target: Vaš izbor? (0/1, default `%s')

en: Your choice? (default %s)
target: Vaš izbor ? (po default-u %s)

en: Your choice? (default `%s'%s)
target: Vaš izbor? (default `%s'%s)

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
target: Vaša grafička kartica izgleda da ima TV-OUT konektor.
    On se može podesiti da radi korišćenjem frame-buffer-a.
    
    Za ovo morate da povežete vašu grafičku karticu sa TV-om pre startanja vašeg kompjutera.
    Onda izaberite "TVout" postavku u starteru
    
    Da li imate ovu opciju?

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
target: Sistem ne podržava vaš modem.
    Drajver potražite na http://www.linmodems.org

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
target: Vaš  multi-funkcionalni uređaj je automatski podešen da bi mogao da skenira. Sada možete da skenirate sa "scanimage" ("scanimage -d hp:%s" da bi odredili skener koda imate više od jednog) iz komandne linije ili sa grafičkim interfejsima "xscanimage" ili "xsane". Ukoliko koristite the GIMP, možete takođe skenirati biranjem odgovarajuće stavke u "File"/"Acquire" meniju. Pogledajte i "man scanimage" u komandnoj liniji za više informacija.
    
    Ne koristi "scannerdrake" za ovaj uređaj!

en: Your personal phone number
target: Vaš lični broj telefona

en: Your printer belongs to the group of GDI laser printers (winprinters) sold by different manufacturers which uses the Zenographics ZJ-stream raster format for the data sent to the printer. The driver for these printers is still in a very early development stage and so it will perhaps not always work properly. Especially it is possible that the printer only works when you choose the A4 paper size.
    
    Some of these printers, as the HP LaserJet 1000, for which this driver was originally created, need their firmware to be uploaded to them after they are turned on. In the case of the HP LaserJet 1000 you have to search the printer's Windows driver CD or your Windows partition for the file "sihp1000.img" and upload the file to the printer with one of the following commands:
    
         lpr -o raw sihp1000.img
         cat sihp1000.img > /dev/usb/lp0
    
    The first command can be given by any normal user, the second must be given as root. After having done so you can print normally.
target: Vaš štampač pripada grupi GDI laserskih štampača (win štampača) prodatih od strane drugih proizvođača koji koriste Zenographics ZJ-stream raster format za slanje podataka štampaču. Drajver za ove štampače je još uvek u ranoj fazi razvoja pa zato ne radi uvek kako treba. Ponekada je moguće da štampač radi samo kada izaberete A4 veličinu papira.
    
    Neki od ovih štampača, kao što je HP LaserJet 1000, za koga je ovaj drajver orginalno i kreiran, zahteva da mu se ubaci firmware nakon što se uključe.U slučaju  HP LaserJet 1000 morate da pronađete na CD sa Windows drajverima ili na vašoj Windows particiji fajl "sihp1000.img" i da ga učitate u štampač sa jednom od sledećih komandi:
    
         lpr -o raw sihp1000.img
         cat sihp1000.img > /dev/usb/lp0
    
    Prva komandu može izvršiti i običan korisnik, a drugu morate pokrenuti kao root. Kada ovo uradite moći ćete da štampate normalno.

en: Your printer model
target: Vaš model štampača

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
target: Vaš štampač se automatski podešava da bi vam dao pristup za foto kartice iz vašeg PC-ja. Sada možete da pristupite vašim foto karticama koristeći se grafičkim programom "MtoolsFM" (Meni: "Aplikacije" -> "Fajl alati" -> "MTools Fajl Menadžer") ili naredbom iz komandne linije "mtools" (unesite "man mtools" u komandnoj liniji za više informacija). Pronaći ćete fajl sistem kartice po oznakom "p:", ili potonjim slovom kada imate više od jednog HP štampača sa foto uređajima. U "MtoolsFM" možete da zamenite slova uređajima sa poljem koje se nalazi u gonjem-desnom uglu liste fajlova.

en: Your system does not have enough space left for installation or upgrade (%d > %d)
target: Vaš sistem nema dovoljno mesta za instalaciju ili ažuriranje (%d > %d)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
target: Vaš sistem ima manjak snage. Usled toga možete imati problema pri instalaciji
    Mandrake Linux. Ukoliko se oni pojave, možete probati tekstualnu instalaciju. Da bi to postigli,
    pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'.

en: Yugoslavian (latin)
target: Srpski (latinica)

en: Zambia
target: Zambija

en: Zimbabwe
target: Zimbabve

en: [OPTIONS]
    Network & Internet connection and monitoring application
    
    --defaultintf interface : show this interface by default
    --connect : connect to internet if not already connected
    --disconnect : disconnect to internet if already connected
    --force : used with (dis)connect : force (dis)connection.
    --status : returns 1 if connected 0 otherwise, then exit.
    --quiet : don't be interactive. To be used with (dis)connect.
target: [OPTIONS]
    Mrežna i Internet konekcija i aplikacije za monitoring
    
    --defaultintf interfejs : prikazuje  ovaj interfejst po osnovnoj postavci
    --connect : povezuje se na Internet ukoliko već nije povezan
    --disconnect : prekida vezu sa Internetom ukoliko je već povezan
    --force : koristi se uz dve prethodne opcije : primorava na povezivanje ili prekid.
    --status : prikadzuje 1 ukoliko je povezan ili 0 ako nije, i zatim završava.
    --quiet : bez interaktivnosti. Treba da se koristi sa opcijama za povezivanje i prekid.

en: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - print this help message.
      --report          - program should be one of mandrake tools
      --incident        - program should be one of mandrake tools
target: [OPTIONS] [PROGRAM_NAME]
    
    OPCIJE:
      --help            - prikazuje ovaj tekst koji sada čitate.
      --report          - program treba da bude jedan od mandrake alata
      --incident        - program treba da bude jedan od mandrake alata

en: [OPTIONS]...
    Mandrake Terminal Server Configurator
    --enable         : enable MTS
    --disable        : disable MTS
    --start          : start MTS
    --stop           : stop MTS
    --adduser        : add an existing system user to MTS (requires username)
    --deluser        : delete an existing system user from MTS (requires username)
    --addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)
    --delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)
target: [OPTIONS]...
    Program za podešavanje Mandrake Terminalnog Servera
    --enable         : uključuje MTS
    --disable        : isključuje MTS
    --start          : pokreće MTS
    --stop           : zaustavlja MTS
    --adduser        : dodaje postojećeg sistemskog korisnika u MTS (zahteva korisničko ime)
    --deluser        : briše postojećeg sistemskog korisnika iz MTS (zahteva korisničko ime)
    --addclient      : dodaje klijentsku mašinu na MTS (zahteva MAC adresu, IP, nbi image ime)
    --delclient      : briše klijentsku mašinu iz MTS (zahteva MAC adresu, IP, nbi image ime)

en: [OPTION]...
      --no-confirmation      don't ask first confirmation question in MandrakeUpdate mode
      --no-verify-rpm        don't verify packages signatures
      --changelog-first      display changelog before filelist in the description window
      --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found
target: [OPTION]...
      --no-confirmation      ne postavlja pitanje o potvrdi u MandrakeUpdate modu
      --no-verify-rpm        ne proverava signature paketa
      --changelog-first      prikadzuje zapis o izmenama pre liste fajlova u prozoru dza opis
      --merge-all-rpmnew     predlaže spajanje svih pronađenih .rpmnew/.rpmsave fajlova

en: a number
target: broj

en: access to X programs
target: pristup X programima

en: access to administrative files
target: pristup administrativnim fajlovima

en: access to compilation tools
target: pristup alatima za kompajliranje

en: access to network tools
target: pristup mrežnim alatima

en: access to rpm tools
target: pristup rpm alatima

en: across Network
target: preko Mreže

en: activate now
target: Aktiviraj sad

en: add a rule
target: Dodajte pravilo

en: alert configuration
target: konfiguracija alarma

en: allow "su"
target: dozvoli "su"

en: and %d unknown printers
target: i %d nepoznati štampači

en: and one unknown printer
target: i jedan nepoznati štampač

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
target: apmd se koristi za praćenje statusa baterije i logovanje preko syslog.
    Koristi se i za gašenje mašine (radi i na desktop mašinama) kada je baterija slaba

en: average
target: prosek

en: boot disk creation
target: Kreiranje boot diska

en: browse
target: pretraži

en: busmouse
target: bus miš

en: but not matching
target: ali ne poklapa se

en: cable connection detected
target: Detektovana je kablovska konekcija

en: choose device
target: izaberite uređaj

en: choose image file
target: izaberite sliku

en: chunk size
target: chunk veličina

en: class of hardware device
target: klasa hardverskog uređaja

en: click here if you are sure.
target: kliknite ovde ukoliko ste sigurni.

en: comma separated numbers
target: odvojeni brojevi sa zarezom

en: comma separated strings
target: odvojeni stringovi sa zarezom

en: commands before booting, or 'c' for a command-line.
target: komandi pri  podizanju sistema,ili  'c' za komandnu liniju

en: compact
target: kompakt

en: connecting to Bugzilla wizard ...
target: konektujem se na Bugzilla čarobnjak ...

en: consolehelper missing
target: consolehelper nedostaje

en: could not find any font in your mounted partitions
target: ne mogu da pronađem nijedan font na montiranoj particiji

en: could not find any font.
target: ne mogu da pronađen nijedan font.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
target: cron je standardni UNIX program koji pokreće korisničke programe
    preriodično u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,uključujući bolju  sigurnost i bolju podesivost.

en: daily
target: dnevno

en: deactivate now
target: deaktiviraj sad

en: delete
target: obriši

en: detected
target: detektovano

en: detected %s
target: detektovano %s

en: detected on port %s
target: Detektovano na portu %s

en: device
target: uređaj

en: dhcpd Config...
target: dhcpd Konfiguracija...

en: dhcpd Server Configuration
target: dhcpd Server konfiguracija

en: disable
target: onemogući

en: dismiss
target: ukloni

en: done
target: urađeno

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
target: drakfirewall konfiguracija
    
    Proerite da li ste podesili vaš Mrežni/Internet pristup sa 
    drakconnect pre nego što nastavite.

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
target: drakfirewall konfigurator
    
    On konfiguriše lični firewall za ovu Mandrake Linux mašinu.
    Za moćno firewall rešenje, pogledajte
    specijalizovanu MandrakeSecurity Firewall distribuciju.

en: edit
target: uredi

en: enable
target: omogući

en: enable radio support
target: omogući podršku za radio

en: error unmounting %s: %s
target: Greška pri demontiranju %s: %s

en: ethernet card(s) detected
target: detektovana mrežna kartica(e)

en: file list sent by FTP: %s
target: lista fajlova poslana preko FTP-a: %s

en: files sending by FTP
target: fajlovi poslani preko FTP-a

en: final resolution
target: konačna rezolucija

en: first step creation
target: kreiranje prvog koraka

en: force
target: silom

en: group
target: grupa

en: group :
target: grupa:

en: hard disk model
target: model hard diska

en: here if no.
target: a ovde ukoliko niste.

en: high
target: veliki

en: hourly
target: na sat

en: if needed
target: ukoliko je potrebno

en: important
target: važno

en: kdesu missing
target: nedostaje kdesu

en: kernel version
target: Verzija kernela

en: level
target: nivo

en: load setting
target: učitaj postavku

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
target: lpd je print demon potreban  da bi lpr radio dobro.To je 
    u osnovi server koji arbitrira  print poslove štampaču(ima).

en: manual
target: upustvo

en: matching
target: poklapanje

en: maybe
target: možda

en: mkinitrd optional arguments
target: mkinitrd opcioni argumenti

en: mkraid failed
target: mkraid neuspelo

en: mkraid failed (maybe raidtools are missing?)
target: mkraid neuspelo (možda nedostaje raidtools ?)

en: monthly
target: mesečno

en: mount failed:
target: montiranje nije uspelo:

en: mounting partition %s in directory %s failed
target: montiranje particije %s u direktorijum %s nije uspelo

en: must have
target: mora imati

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
target: Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host ime IP adresi.

en: network printer port
target: port mrežnog štampača

en: new
target: novi

en: nice
target: lepo

en: no fonts found
target: fontovi nisu pronađeni

en: no network card found
target: Nije pronađena mrežna kartica

en: none
target: nijedan

en: not configured
target: nije podešeno

en: not enough room in /boot
target: nema dovoljno mesta u /boot

en: number of capture buffers for mmap'ed capture
target: broj capture buffer-a za mmap'ed capture

en: old static device name used in dev package
target: staro statičko ime uređaja korišteno u dev paketu

en: omit raid modules
target: omit raid moduli

en: omit scsi modules
target: omit scsi moduli

en: on CDROM
target: na CD uređaju

en: on Hard Drive
target: na Hard Disk

en: on Tape Device
target: na uređaju za trake

en: on channel %d id %d
target: na kanalu %d ID %d

en: options description:
    
     - Backup system files:
           
    	This option allows you to backup your /etc directory,
    	which contains all configuration files. Please be
    	careful during the restore step to not overwrite:
    		/etc/passwd 
    		/etc/group 
    		/etc/fstab
    
     - Backup User files: 
    
    	This option allows you select all users that you want 
    	to backup.
    	To preserve disk space, it is recommended that you 
    	do not include the web browser's cache.
    
     - Backup Other files: 
    
    	This option allows you to add more data to save.
    	With the other backup it's not possible at the 
    	moment to select incremental backup.		
     
     - Incremental Backups:
    
    	The incremental backup is the most powerful 
    	option for backup. This option allows you 
    	to backup all your data the first time, and 
    	only the changed data afterward.
    	Then you will be able, during the restore
    	step, to restore your data from a specified
    	date.
    	If you have not selected this option all
    	old backups are deleted before each backup.
target: Opis opcija:
    
     - Backup sistemskih fajlova:
           
    	Ova opcija dozvoljava da backup-ujete vaš /etc direktorijum,
    	koji sadrži sve konfiguracione fajlove. Molim Vas da budete
    	pažljivi tokom obnavljanja da ne bi prepisali sledeće fajlove:
    		/etc/passwd 
    		/etc/group 
    		/etc/fstab
    
     - Backup Korisničkih fajlova: 
    
    	Ova opcija vam omogućava da selektujete sve korisnike koje želite 
    	da backup-ujete.
    	Da bi sačuvali prostor na disku, preporučujemo da 
    	uključujete fajlove iz keša internet pretraživača.
    
     - Backup Ostalih fajlova: 
    
    	Ova opcija vam omogućava da dodate još podataka za Backup.
    	Sa ovom opcijom trenutno nije moguće 
    	izabrati inkrementalni backup.		
     
     - Inkrementalni Backup-ovi:
    
    	Inkrementalni backup je najmoćnija 
    	opcija za backup. Ova opcija vam omogućava 
    	da svev vaše podatke prvi put, a 
    	kasnije samo one izmenjene.
    	Tada ćete moći, tokom obnavljanja
    	da obnovite vaše podatke po određenom
    	datumu.
    	Ukoliko niste izabrali ovu opciju svi
    	stari backup-ovi su izbrisani pre svakog backup-a.

en: options description:
    
     In this step Drakbackup allow you to change:
    
     - The compression mode:
        
          If you check bzip2 compression, you will compress
          your data better than gzip (about 2-10 %%).
          This option is not checked by default because
          this compression mode needs more time (about 1000%% more).
     
     - The update mode:
    
          This option will update your backup, but this
          option is not really useful because you need to
          decompress your backup before you can update it.
          
     - the .backupignore mode:
    
          Like with cvs, Drakbackup will ignore all references
          included in .backupignore files in each directories.
          ex: 
             #> cat .backupignore
             *.o
             *~
             ...
target: Opis opcija:
    
     U ovom koraku Drakbackup vam omogućava da promenite:
    
     - Mod kompresije:
        
          Ukoliko izaberete bzip2 kompresiju, bolje ćete
          kompresovati podatke od gzip-a (oko 2-10 %%)
          Ova opcija nije selektovana po default-u zbog
          toga što ova kompresija zahteva više vremena ( oko 1000%%više).
     
     - Mod ažuriranja:
    
          Ova opcija će ažurirati vaš backup, ali ova
          opcija nije naročito praktična zato što morate da
          raspakujete vaš backup pre nego ga možete ažurirati.
          
     - the .backupignore mod:
    
          Kao sa cvs-om, Drakbackup će ignorisati sve uključene
          reference .backupignore fajlova u svakom direktorijumu.
          primer: 
             /*> cat .backupignore*/
             *.o
             *~
             ...

en: options description:
    
    Please be careful when you are using ftp backup, because only 
    backups that are already built are sent to the server.
    So at the moment, you need to build the backup on your hard 
    drive before sending it to the server.
target: Opis ocija:
    
    Budite pažljivi kada koristite ftp backup, zato što samo 
    backup-ovi koji su već kreirani su poslati na server.
    Tako da u ovom trenutku, morate da kreirate backup na hard disku 
    pre nego ga pošaljete na server.

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
target: paket 'ImageMagick' je potreban da pravilan rad.
    Kliknite na "U redu" za bi instalirali 'ImageMagick' ili "Poništi" za kraj

en: paranoid
target: paranoidni

en: parse all fonts
target: parsiraj sve fontove

en: partition %s
target: particija %s

en: partition %s is now known as %s
target: particija %s je sada poznata kao %s

en: path
target: putanja

en: permissions
target: dozvole

en: pfm fonts conversion
target: Konverzija pfm fontova

en: please choose the date to restore
target: izaberite datum za obnavljanje

en: please wait during ttmkfdir...
target: sačekajte, u toku je ttmkfdir...

en: please wait, parsing file: %s
target: molim Vas sačekajte, parsiram datoteku: %s

en: primary
target: primarno

en: received
target: primljeno

en: received:
target: primljeno:

en: reconfigure
target: ponovo podesi

en: replay
target: ponovi

en: restore description:
     
    Only the most recent date will be used, because with incremental 
    backups it is necessary to restore one by one each older backup.
    
    So if you don't want to restore a user please unselect all their
    check boxes.
    
    Otherwise, you are able to select only one of these.
    
     - Incremental Backups:
    
    	The incremental backup is the most powerful 
    	option to use. This option allows you to 
    	backup all of your data the first time, and 
    	only the changed data after.
    	So you will be able, during the restore
    	step, to restore your data from a specified
    	date.
    	If you have not selected this option all
    	old backups are deleted before each backup.
target: Opis obnavljanja:
     
    Samo najnoviji podaci će biti korišćeni, zato što inkrementalni 
    backup-u neophodno da obnavlja stare backup-ove jedan po jedan.
    
    Ukoliko ne želite da obnavljate određenog korisnika deselektujte sve
    njegove selekcije.
    
    U drugom slučaju, moći ćete da izaberete samo jedan od ovih
    
     - Inkrementalni Backup-ovi:
    
    	Inkrementalni backup je najmoćnija opcija 
    	u backup-u, jer vam omogućava da 
    	to backup-ujete sve podatke prvi put, a 
    	kasnije samo one koji su izmenjeni.
    	Tako ćete  moći tokom obnavljanja
    	da obnovite vaše podatke sa određenim
    	datumom.
    	Ukoliko niste izabrali ovu opciju svi
    	stari backup-ovi će biti izbrisani pre svakog backup-a.

en: restrict
target: ograničeno

en: running
target: pokrenuto

en: saving Bootsplash theme...
target: snimam Bootsplash temu...

en: search
target: traži

en: secondary
target: sekundarno

en: select path to restore (instead of /)
target: izaberite putanju za obnavljanje (umesto /)

en: select perm file to see/edit
target: izaberite perm fajl da bi videli/izmenili

en: sent:
target: poslano:

en: serial
target: serijski

en: service setting
target: podešavanje servisa

en: simple
target: jednostavno

en: stopped
target: zaustavljeno

en: text box height
target: visina tekst boksa

en: text width
target: širina teksta

en: the color of the progress bar
target: boja trake sa prikazom napretka

en: the height of the progress bar
target: visina trake sa prikazom napretka

en: the list of alternative drivers for this sound card
target: lista alternativnih drajvera za ovu zvučnu karticu

en: the module of the GNU/Linux kernel that handles the device
target: modul GNU/Linux kernela koji upravlja tim uređajem

en: the number of the processor
target: Broj procesora

en: the progress bar x coordinate
    of its upper left corner
target: x koordinata trake sa prikazom napretka
    od svog gornjeg levog ugla

en: the progress bar y coordinate
    of its upper left corner
target: y koorinata trake sa prikazom napretka
    od svog gorenjeg levog ugla

en: the vendor name of the device
target: Ime prizovđača uređaja

en: the vendor name of the processor
target: imee prizvođača procesora

en: the width of the progress bar
target: sirina trake sa prikazom napretka

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
target: ovo je fizički bus na koji je uređaj priključen (npr: PCI, USB, ...)

en: transmitted
target: prebačeno

en: ttf fonts conversion
target: Konverzija ttf fontova

en: type1inst building
target: kreiram type1inst

en: type: %s
target: tip: %s

en: use dhcp
target: koristi dhcpd

en: use pppoe
target: koristi pppoe

en: use pptp
target: koristi pptp

en: user
target: korisnik

en: user :
target: korisnik:

en: very nice
target: veoma lepo

en: weekly
target: nedeljno

en: when checked, owner and group won't be changed
target: kada je selektovana, vlasnik i grupa ne mogu biti promenjeni

en: with /usr
target: sa /usr

en: x coordinate of text box
    in number of characters
target: x koordinata tekst boksa
    u broju karaktera

en: xfs restart
target: Restart xfs

en: y coordinate of text box
    in number of characters
target: y koorditnata tekst boksa
    u broju karaktera

en: yes means the arithmetic coprocessor has an exception vector attached
target: sa znači da aritmetički koprocesor ima prikačen dodatni vektor

en: yes means the processor has an arithmetic coprocessor
target: da znači da procesor ima aritmetički koprocesor
