Content-type: text/html Manpage of RA

RA

Section: User Commands (1)
Updated: 12 November 2000
Index Return to Main Contents

NAME

ra - read argus(8) data.

COPYRIGHT

SYNOPSIS

ra [raoptions] [- filter-expression]

DESCRIPTION

Ra reads argus(8) data from either stdin, an argus-file, or from a remote argus-server, filters the records it encounters based on an optional filter-expression and either prints the contents of the argus(5) records that it encounters to stdout or appends them into an argus(5) datafile.

OPTIONS

-A

Print aggregate statistics for the input stream on termination.

-b

Dump the compiled transaction-matching code to standard output and stop. This is useful for debugging filter expressions.

-c

Specify a delimiter character for output columns (default is ' ').

-C

Indicate that the data source is Cisco Netflow wire record format.

-D <level>

Print debug information corresponding to <level> to stderr, if program compiled to support debug printing. As the level increases, so does the amount of debug information ra(1) will print. Values range from 1-8.

-E <file>

When using a filter expression at the end of the command, this option will cause ra(1) to append the records that are rejected by the filter into <file>

-F <conffile>

Use <conffile> as a source of configuration information. The format of this file is identical to rarc(5). The data read from <conffile> overrides any prior configuration information.

-h

Print an explanation of all the arguments.

-n

Modify number to name converstion. This flag supports 3 states, specified by the modulus of the number of -n flags set. The first -n will suppress address to hostname lookups. -nn will suppress port number to service conversion and -nnn will suppress translation of protocol numbers to names. -nnnn will return you to full conversion. Because this indicator can be set in the .rarc file, multiple -n flags can be used to specify to a specific state of number to name conversion.

-M <mode [mode ...]>

Provide addition mode operators. These are generally specific to the individual ra* program, or a specific function. Available modes for ra() are:

   poll            - successfully attach to remote data source and then exit
   rmon            - modify data to support unidiretional RMON stat reporting
   saslmech="mech" - specify a mandatory SASL mech
   TZ="tzset"      - specify a tzset(3) time zone specification
   xml             - print output in xml format.

-N <num[-num]>

Process <num> or the <num - num > range of input records. These records must match the input filter if any filter is used.

-p <digits>

Print <digits> number of units of precision for floating point values.

-q

Run in quiet mode. Configure Ra to not print out the contents of records. This can be used with the -T and -a options to support aggregate activity without printing each input record.

-r [- | <file file ...>]

Read data from <files> in the order presented on the commandline. '-' denotes stdin. If you want to read a set of files and then, when done, read stdin, use multiple occurences of the -r option. Ra can read gzip(1), bzip2(1) and compress(1) compressed data files.

-R <dir dir ...>

Recursively decend the directory and process all the regular files that are encountered. The function does not decend to links, or directories that begin with '.'. The feature, like the -r command, does not do any file type checking.

-s <[-][[+[#]]field[:len] ...>

Specify the fields to print. Ra uses a default printing field list, by specifying a field you can replace this list completely, or you can modify the existing default print list, using the optional '-' and '+[#]' form of the command. The available fields to print are:

   srcid, stime, ltime, sstime, dstime, dstime, dltime, 
   trans, seq, flgs, dur, avgdur, stddev, mindur, maxdur,
   saddr, daddr, proto, sport, dport, stos, dtos, sdsb, ddsb,
   sttl, dttl, sipid, dipid, smpls, dmpls, svlan, dvlan, svid, dvid,
   svpri, dvpri, [s|d]pkts, [s|d]bytes, [s||d]appbytes, [s|d]load,
   [s|d]loss, [s|d]ploss, [s|d]rate, smac, dmac, dir,
   [s|d]intpkt, [s|d]jit, state, suser, duser, swin, dwin,
   trans, srng, drng, stcpb, dtcpb, tcprtt, inode

srcid: argus source identifier.
stime: record start time
ltime: record last time.
trans: aggregation record count.
seq: argus sequence number.
flgs: TCP flags seen in transaction.
dur: record total duration.
avgdur: average duration of aggregated records..
stddev: standard deviation of aggregated duration times.
mindur: minimum duration of aggregated records.
maxdur: maximum duration of aggregated records.
saddr: source IP addr.
daddr: destination IP addr.
proto: transaction protocol.
sport: source port number.
dport: destination port number.
stos: source TOS byte value.
dtos: destination TOS byte value.
sdsb: source diff serve byte value.
ddsb: destination diff serve byte value.
sttl: src -> dst TTL value.
dttl: dst -> src TTL value.
sipid: source IP identifier.
dipid: destination IP identifier.
smpls: source MPLS identifier.
dmpls: destination MPLS identifier.
pkts: total transaction packet count.
spkts: src -> dst packet count.
dpkts: dst -> src packet count.
bytes: total transaction bytes.
sbytes: src -> dst transaction bytes.
dbytes: dst -> src transaction bytes.
appbytes: total application bytes.
sappbytes: src -> dst application bytes.
dappbytes: dst -> src application bytes.
load: bits per second.
sload: source bits per second.
dload: destination bits per second.
loss: pkts retransmitted or dropped.
sloss: source pkts retransmitted or dropped.
dloss: destination pkts retransmitted or dropped.
ploss: percent pkts retransmitted or dropped.
sploss: percent source pkts retransmitted or dropped.
dploss: percent destination pkts retransmitted or dropped.
rate: pkts per second.
srate: source pkts per second.
drate: destination pkts per second.
smac: source MAC addr.
dmac: destination MAC addr.
dir: direction of transaction
intpkt: interpacket arrival time
sintpkt: source interpacket arrival time
dintpkt: destination interpacket arrival time
jit: jitter.
sjit: source jitter.
djit: destination jitter.
status: transaction status
suser: source user date buffer.
dvlan: destination user date buffer.
swin: source TCP window advertisement.
dwin: destination TCP window advertisement.
svlan: source VLAN identifier.
dvlan: destination VLAN identifier.
svid: source VLAN identifier.
dvid: destination VLAN identifier.
svpri: source VLAN priority.
dvpri: destination VLAN priority.
srng: source time range.
drng: destination time range.
stcpb: source TCP base sequence number
dtcpb: destination TCP base sequence number
tcprtt: TCP connection setup round-trip time.
inode: ICMP intermediate node.
offset: record byte offset in file or stream.

Examles are:

   -s saddr      print only the source address.
   -s -bytes     removes the bytes field from list.
   -s +2srcid    adds the source identifier as the 2nd field.
   -s spkts:18   prints src pkt count with a column width of 18.
   -s smpls      print the local mpls label in the flow.

-S <host[:portnum]>

-S <portnum>

Specify a source of argus data, either a remote argus-server <host>, or a local Netflow Record source. Use the optional ':portnum' to specify a port number other than the default; 561. If the -C flag is in use, then the host is the local interface address where Netflow Cisco records are transmitted. If absent, then it is implied that the interface address is '0.0.0.0'.

-t <timerange>

Specify the <time range> for matching argus(5) records. This option supports a high degree of flexibility in specifing explicit and relative time ranges with support for time field wildcarding.

The syntax for the <time range> is:

[timeComparisonInd]timeSpecification[-timeSpecification]
   timeComparisonInd: i | n | c    (default = i)
     i  intersects match records that were active during this time period
     n  includes   match records that start before and end after the period
     c  contained  match records that start and end during the period

   timeSpecification: [[[yyyy/]mm/]dd.]HH[:MM[:SS]]
                        [yyyy/]mm/dd
                        %d{ymdHMS}
                        { + | - }%d{ymdHMS}

   where '*' can be used as a wildcard.

Examples are:

   -t 14             specify the time range 2pm-3pm for today
   -t 1999y1m23d10h  matches 10-11am on Jan, 23, 1999
   -t 10d*h*m15s     matches recordds that intersect the 15 sec,
                     any minute, any hour, on the 10th of this month
   -t ****/11/23     all records in Nov 23rd, 2006, any year
   -t 23.11:10-14    11:10:00 - 2pm on the 23rd of this month
   -t -10m           matches 10 minutes before, to the present
   -t -2h5m+5m       matches records that start before and end
                     after the range starting 2 hours 5 minutes
                     prior to the present, and lasting 5 minutes.

Time is compared using basic intersection operations. A record iPntersects a specified time range if there is any intersection between the time range of the record and the comparison time range. This is the default behavior. A record includes the comparison time range if the intersection of the two ranges equals the comparison time, and a record is contained when the intersection equals the duration of the record. The comparison indicator is the first character of the range specification, without spaces.

Examples are:

   -t n14:10:15-14:10:19  records include these 4s.
   -t c14:10-14:10:10     record starts and ends within these 10s.

-T <secs>

Read argus(5) from remote server for <secs> of time.

-u

Print time values using UTC time format.

-w <file>

Append matching data to <file>, in argus file format. An output-file of '-' directs ra to write the argus(5) records to stdout, allowing for "chaining" ra* style commands together.

-X

Don't read the default rarc file.

-z

Modify status field to represent TCP state changes. Values are

  's' - Syn Transmitted
  'S' - Syn Acknowledged
  'E' - TCP Established
  'f' - Fin Transmitted  (FIN Wait State 1)
  'F' - Fin Acknowledged (FIN Wait State 2)
  'R' - TCP Reset

-Z <s|d|b>

Modify status field to reprsent actual TCP flag values. <'s'rc | 'd'st | 'b'oth>.

  'F' - Fin
  'S' - Syn
  'R' - Reset
  'P' - Push
  'A' - Ack
  'U' - Urgent Pointer
  '7' - Undefined 7th bit set
  '8' - Undefined 8th bit set

FILTER EXPRESSION

If arguments remain after option processing, the collection is interpreted as a single filter expression. In order to indicate the end of arguments, a '-' is recommended before the filter expression is added to the command line.

The filter expression specifies which argus(5) records will be selected for processing. If no expression is given, all records are selected, otherwise, only those records for which expression is `true' will be printed.

The syntax is very similar to the expression syntax for tcpdump(1), as the tcpdump compiler was the basis for the argus(5) filter expression compiler. The semantics for tcpdump(1)'s packet filter expression are different when applied to transaction record filtering, so there are some major differences.

The expression consists of one or more primitives. Primitives usually consist of an id (name or number) preceded by one or more qualifiers. There are three different kinds of qualifier:

type: qualifiers say what kind of thing the id name or number refers to. Possible types are srcid, encaps, host, net, port, tos, ttl, ptks, bytes, appbytes, data, rate, load, loss, ploss, mid, vid, vpri, and mid.
E.g., `srcid isis`, `encaps gre', `host sphynx', `net 192.168.0.0/16', `port domain', `ttl 1', 'ptks gt 2', If there is no type qualifier, host is assumed.
dir: qualifiers specify a particular transfer direction to and/or from an id. Possible directions are src, dst, src or dst and src and dst. E.g., `src sphynx', `dst net 192.168.0.0/24', `src or dst port ftp', `src and dst tos 0x0a', `src or dst vid 0x12`, `dst vpri 0x02` . If there is no dir qualifier, src or dst is assumed.
proto: qualifiers restrict the match to a particular protocol. Possible values are those specified in the /etc/protocols system file and a small number of extensions, (that should be defined but aren't). Specific extended values are 'ipv4', (to specify just ip version 4), in contrast to the defined proto 'ipv6'. The defined proto 'ip' reduces to the filter 'ipv4 or ipv6'.
When preceeded by ether, the protocol names and numbers that are valid are specified in ./include/ethernames.h.

In addition to the above, there are some special `primitive' keywords that don't follow the pattern: gateway, multicast, and broadcast. All of these are described below.

More complex filter expressions are built up by using the words and, or and not to combine primitives. E.g., `host foo and not port ftp and not port ftp-data'. To save typing, identical qualifier lists can be omitted. E.g., `tcp dst port ftp or ftp-data or domain' is exactly the same as `tcp dst port ftp or tcp dst port ftp-data or tcp dst port domain'.

Allowable primitives are:

srcid argusid

True if the argus identifier field in the Argus record is srcid, which may be an IP address, a name or a decimal/hexidecimal number.

encaps type

True if the encapsulation used by the flow in the Argus record includes the type. The list of valid encapsulation types is:



 mpls, eth, 802q, llc, pppoe, isl, gre, ah, ipnip, ipnip6
dst host host
True if the IP destination field in the Argus record is host,
which may be either an address or a name.
src host host
True if the IP source field in the Argus record is host.
host host
True if either the IP source or destination in the Argus record is host.
Any of the above host expressions can be prepended with the keywords
ip, arp, or rarp as in:
ip host host

which is equivalent to:

ether proto ip and host host

If host is a name with multiple IP addresses, each address will be checked for a match.

ether dst ehost

True if the ethernet destination address is ehost. Ehost may be either a name from /etc/ethers or a number (see ethers(3N) for numeric format).

ether src ehost

True if the ethernet source address is ehost.

ether host ehost

True if either the ethernet source or destination address is ehost.

gateway host

True if the transaction used host as a gateway. I.e., the ethernet source or destination address was host but neither the IP source nor the IP destination was host. Host must be a name and must be found in both /etc/hosts and /etc/ethers. (An equivalent expression is

ether host ehost and not host host

which can be used with either names or numbers for host / ehost.)

dst net cidr

True if the IP destination address in the Argus record matches the cidr address.

src net cidr

True if the IP source address in the Argus record matches the cidr address.

net cidr

True if either the IP source or destination address in the Argus record matches cidr address.

dst port port

True if the network transaction is ip/tcp or ip/udp and has a destination port value of port. The port can be a number or a name used in /etc/services (see tcp(4P) and udp(4P)). If a name is used, both the port number and protocol are checked. If a number or ambiguous name is used, only the port number is checked (e.g., dst port 513 will print both tcp/login traffic and udp/who traffic, and port domain will print both tcp/domain and udp/domain traffic).

src port port

True if the network transaction has a source port value of port.

port port

True if either the source or destination port in the Argus record is port. Any of the above port expressions can be prepended with the keywords, tcp or udp, as in:

tcp src port port

which matches only tcp connections.

ip proto protocol

True if the Argus record is an ip transaction (see ip(4P)) of protocol type protocol. Protocol can be a number or any of the string values found in /etc/protocols.

multicast

True if the network transaction involved an ip multicast address. By specifing ether multicast, you can select argus records that involve an ethernet multicast address.

broadcast

True if the network transaction involved an ip broadcast address. By specifing ether broadcast, you can select argus records that involve an ethernet broadcast address.

ether proto protocol

True if the Argus record is of ether type protocol. Protocol can be a number or a name like ip, arp, or rarp.

[src | dst] ttl [gt | gte | lt | lte | eq] number

True if the TTL in the Argus record equals number.

[src | dst] tos [gt | gte | lt | lte | eq] number

True if the TOS in the Argus record (default) equals number.

[src | dst] vid [gt | gte | lt | lte | eq] number

True if th VLAN id in the Argus record (default) equals number.

[src | dst] vpri [gt | gte | lt | lte | eq] number

True if the VLAN priority in the Argus record (default) equals number.

[src | dst] mid [gt | gte | lt | lte | eq] number

True if the MPLS Label in the Argus record (default) equals number.

[src | dst] pkts [gt | gte | lt | lte | eq] number

True if the packet count in the Argus record (default) equals number.

[src | dst] bytes [gt | gte | lt | lte | eq] number

True if the byte count in the Argus record (default) equals number.

[src | dst] appbytes [gt | gte | lt | lte | eq] number

True if the application byte count in the Argus record (default) equals number.

[src | dst] rate [gt | gte | lt | lte | eq] number

True if the rate in the Argus record (default) equals number.

[src | dst] load [gt | gte | lt | lte | eq] number

True if the load in the Argus record (default) equals number.

Ra filter expressions support primitives that are specific to flow states and can be used to select flow records that were in these states at the time they were generated. normal, wait, timeout, est or con

Primitives that select flows that experienced fragmentation. frag and fragonly

Support for selecting flows that used multiple pairs of MAC addresses during their lifetime. multipath

Primitives specific to TCP flows are supported. syn, synack, ecn, fin, finack, reset, retrans, outoforder and winshut

Primitives specific to ICMP flows are supported. echo, unreach, redirect and timexed

For some primitives, a direction qualifier is appropriate. These are frag, reset, retrans, outoforder and winshut

Primitives may be combined using:

: A parenthesized group of primitives and operators (parentheses are special to the Shell and must be escaped).
: Negation (`!' or `not').
: Concatenation (`and').
: Alternation (`or').

Negation has highest precedence. Alternation and concatenation have equal precedence and associate left to right. Note that explicit and tokens, not juxtaposition, are now required for concatenation.

If an identifier is given without a keyword, the most recent keyword is assumed. For example,

not host sphynx and anubis

is short for

not host sphynx and host anubis

which should not be confused with

not ( host sphynx or anubis )

Expression arguments can be passed to ra(1) as either a single argument or as multiple arguments, whichever is more convenient. Generally, if the expression contains Shell metacharacters, it is easier to pass it as a single, quoted argument. Multiple arguments are concatenated with spaces before being parsed.

Startup Processing

Ra begins by searching for the configuration file .rarc first in the directory, $ARGUSHOME and then $HOME. If a .rarc is found, all variables specified in the file are set.

Ra then parses its command line options and set its internal variables accordingly.

If a configuration file is specified on the command-line, using the "-f <confile>" option, the values in this .rarc formatted file superceed all other values.

EXAMPLES

To report all TCP transactions from and to host 'narly.wave.com', reading transaction data from argus-file argus.data:

ra -r argus.data - tcp and host narly.wave.com

Create the argus-file icmp.log with all ICMP events involving the host nimrod, using data from argus-file, but reading the transaction data from stdin:

cat argus-file | ra -r - -w icmp.log - icmp and host nimrod

OUTPUT FORMAT

The following is a brief description of the output format of ra which reports transaction data in various levels of detail. The general format is:


  time proto  srchost  dir  dsthost  [count] state

time

The format of the time field is specified by the .rarc file, using syntax supported by the routine strftime(3V). The default is '%T'. Argus transactional data contains both starting and ending transaction times, with precision to the microsecond. However, ra by default prints out the 'stime' field, the records starting time.

mac.addr

mac.addr is an optional field, specified using the -m flag. mac.addr represents the first source and destination MAC addresses seen for a particular transaction. These addresses are paired with the host.port fields, so the direction indicator is needed to distinguish between the source and destination MAC addresses.

proto [options protocol]

The proto indicator consists of two fields. The first is protocol specific and the designations are:



 T        -  Time Corrected/Adjusted
  *       -  Multiple sub-IP encapsulations
  m       -  MPLS encapsulated flow
  e       -  Ethernet encapsulated flow
  l       -  LLC encapsulated flow
  v       -  802.11Q encapsulations/tags
  p       -  PPP over Enternet encapsulated flow
  i       -  ISL encapsulated flow
  G       -  GRE encapsulation
  A       -  AH encapsulation
  P       -  IP tunnel encapsulation
  6       -  IPv6 tunnel encapsulation
   I      -  ICMP events mapped to this flow
   U      -  ICMP Unreachable event mapped to this flow
   R      -  ICMP Redirect event mapped to this flow
   T      -  ICMP Time Exceeded mapped to this flow
    *     -  Both Src and Dst loss/retransmission
    s     -  Src loss/retransmissions
    d     -  Dst loss/retransmissions
    &     -  Both Src and Dst packet out of order
    i     -  Src packets out of order
    r     -  Dst packets out of order
     @    -  Both Src and Dst Window Closure
     S    -  Src TCP Window Closure
     D    -  Dst TCP Window Closure
      E   -  Both Src and Dst ECN
      x   -  Src Explicit Congestion Notification
      t   -  Dst ECN
       V  -  Fragment overlap seen
       f  -  Partial Fragment
       F  -  Fragments seen
        O  -  multiple IP options set
        S  -  IP option Strict Source Route
        L  -  IP option Loose Source Route
        T  -  IP option Time Stamp
        +  -  IP option Security
        R  -  IP option Record Route
        A  -  IP option Router Alert
        U  -  unknown IP options set

The second field indicates the upper protocol used in the transaction. This field will contain the first 4 characters of the official name for the protocol used, as defined in RFC-1700. Argus attempts to discovery the Realtime Transport Protocol, when it is being used. When it encounters RTP, it will indicate its use in this field, with the string 'rtp'. Use of the -n option, twice (-nn), will cause the actual protocol number to be displayed.

host

The host field is protocol dependent, and for all protocols will contain the IP address/name. For TCP and UDP, the field will also contain the port number/name, separated by a period.

dir

The dir field will have the direction of the transaction, as can be best determined from the datum, and is used to indicate which hosts are transmitting. For TCP, the dir field indicates the actual source of the TCP connection, and the center character indicating the state of the transaction.


     -  - transaction was NORMAL
     |  - transaction was RESET
     o  - transaction TIMED OUT.
     ?  - direction of transaction is unknown.

count

count is an optional field, specified using the -c option. There are 4 fields that are produced. The first 2 are the packet counts and the last 2 are the byte counts for the specific transaction. The fields are paired with the previous host fields, and represent the packets transmitted by the respective host.

state

The state field indicates the principle state for the transaction report, and is protocol dependent. For all the protocols, except ICMP, this field reports on the basic state of a transaction.

REQ|INT (requested|initial) This indicates that this is the initial state report for a transaction and is seen only when the argus-server is in DETAIL mode. For TCP connections this is REQ, indicating that a connection is being requested. For the connectionless protocols, such as UDP, this is INT.

ACC (accepted) This indicates that a request/response condition has occurred, and that a transaction has been detected between two hosts. For TCP, this indicates that a connection request has been answered, and the connection will be accepted. This is only seen when the argus-server is in DETAIL mode. For the connectionless protocols, this state indicates that there has been a single packet exchange between two hosts, and could qualify as a request/response transaction.

EST|CON (established|connected) This record type indicates that the reported transaction is active, and has been established or is continuing. This should be interpreted as a state report of a currently active transaction. For TCP, the EST state is only seen in DETAIL mode, and indicates that the three way handshake has been completed for a connection.

CLO (closed) TCP specific, this record type indicates that the TCP connection has closed normally.

TIM (timeout) Activity was not seen relating to this transaction, during the argus server's timeout period for this protocol. This state is seen only when there were packets recorded since the last report for this transaction.

For the ICMP and ICMPv6 protocols, the state field displays specific aspects of the ICMP type. ICMP state can have the values:


ECO     Echo Request
ECR     Echo Reply
SRC     Source Quench
RED     Redirect
RTA     Router Advertisement
RTS     Router Solicitation
TXD     Time Exceeded
PAR     Parameter Problem
TST     Time Stamp Request
TSR     Time Stamp Reply
IRQ     Information Request
IRR     Information Reply
MAS     Mask Request
MSR     Mask Reply
URN     Unreachable network
URH     Unreachable host
URP     Unreachable port
URF     Unreachable need fragmentation
URS     Unreachable source failed
URNU    Unreachable dst network unknown
URHU    Unreachable dst host unknown
URISO   Unreachable source host isolated
URNPRO  Unreachable network administrative prohibited
URHPRO  Unreachable host administrative prohibited
URNTOS  Unreachable network TOS prohibited
URHTOS  Unreachable host TOS prohibited
URFIL   Unreachable administrative filter
URPRE   Unreachable precedence violation
URCUT   Unreachable precedence cutoff

MRQ     Membership Query
MHR     Membership Report
NDS     Neighbor Discovery Router Solicit
NDA     Neighbor Discovery Router Advertisement
NDN     Neighbor Discovery Neighbor Solicit
NDR     Neighbor Discovery Neighbor Advertisement
PTB     Packet Too Big

OUTPUT EXAMPLES

These examples show typical ra output, and demonstrates a number of variations seen in argus data. This ra output was generated using the -n option to suppress number translation.

Thu 12/29 06:40:32   S tcp  132.3.31.15.6439   -> 12.23.14.77.23   CLO

This is a normal tcp transaction to the telnet port on host 12.23.14.77. The IP Option strict source route was seen.

Thu 12/29 06:40:32     tcp  132.3.31.15.6200  <|  12.23.14.77.25   RST

This tcp transaction from the smtp port of host 12.23.14.77 was RESET. In many cases this indicates that the transaction was rejected, however some os's will use RST to close an active TCP. Use either the -z or -Zb options to specify exactly what conditions existed during the connection.

Thu 12/29 03:39:05  M  igmp 12.88.14.10       <-> 128.2.2.10       CON

This is an igmp transaction state report, usually seen with MBONE traffic. There was more than one source and destination MAC address pair used to support the transaction, suggesting a possible routing loop.

Thu 12/29 06:40:05 *   tcp  12.23.14.23.1043  <-> 12.23.14.27.6000 TIM

This is an X-windows transaction, that has TIMEDOUT. Packets were retransmitted during the connection.

Thu 12/29 07:42:09     udp   12.9.1.115.2262   -> 28.12.141.6.139  INT

This is an initial netbios UDP transaction state report, indicating that this is the first datagram encountered for this transaction.

Thu 12/29 06:42:09     icmp  12.9.1.115       <-> 12.68.5.127      ECO

This example represents a "ping" of host 12.9.1.115, and its response.

This next example shows the ra output of a complete TCP transaction, with the preceeding Arp and DNS requests, while reading from a remote argus-server. The '*' in the CLO report indicates that at least one TCP packet was retransmitted during the transaction. The hostnames in this example are ficticious.

% ra -S argus-server and host i.qosient.com
ra: Trying argus-server port 561
ra: connected Argus Version 3.0
Sat 12/03 15:29:38     arp  i.qosient.com     who-has  dsn.qosient.com  INT
Sat 12/03 15:29:39     udp  i.qosient.com.1542  <->    dns.qosient.53   INT
Sat 12/03 15:29:39     arp  i.qosient.com     who-has  qosient.com      INT
Sat 12/03 15:29:39 *   tcp  i.qosient.com.1543   ->    qosient.com.smtp CLO

AUTHORS

Carter Bullard (carter@qosient.com).

FILES

/etc/ra.conf

Index

FILTER EXPRESSION

Startup Processing

This document was created by man2html, using the manual pages.
Time: 13:20:15 GMT, May 16, 2007