TakTuk - a tool for large scale remote execution deployment
taktuk [-behinsvzMP] [-c connector] [-d limit] [-f filename] [-g duration] [-l login] [-m hostname [-[ args ... -]]] [-o stream=template] [-t timeout] [-u limit] [-w size] [-B parameter=expression] [-C separators] [-E character] [-F filename] [-G hostname [-[ args ... -]]] [-L hostname] [-I interpreter] [-O separators] [-R stream=filename] [-S files] [-T command] [-V path ] [-W scheme] [commands ... ]
TakTuk is a tool for broadcasting the remote execution of one ore more commands to a set of one or more distant machines. TakTuk combines local parallelization (using concurrent deployment processes) and work distribution (using an adaptive work-stealing algorithm) to achieve both scalability and efficiency.
TakTuk is especially suited to interactive tasks involving several distant machines and parallel remote executions. This is the case of clusters administration and parallel program debugging.
TakTuk also provides a basic communication layer to programs it executes. This communication layer uses the communication infrastructure set up by TakTuk during its deployment. It is available both for the Perl and the C langages and is described in TakTuk(3) and taktukcomm(3) respectively.
Caution, in TakTuk options are parsed in the order given on the command line. This means that TakTuk is not POSIX compliant regarding options order. This is important as some of the options change the behavior of following ones (and only these ones - e.g. -l applies to following -m options). The defaults settings of TakTuk can be obtained by using the --print-defaults option. The following options are given by category in alphabetical order.
begins a new deployment group. A deployment group acts both as a context for most options (options set within a group have no effect outside the group) and as an isolation for deployment tasks scheduling (deployment tasks within a group cannot be stolen by nodes deployed in other groups).
defines the connector command used to contact the following remote machines.
turns dynamic mode (work stealing) on or off for the deployment of all the following remote machines specifications. If limit is positive or null, TakTuk uses the dynamic mode with its value as a maximal arity (0 = no maximal arity). A negative value for limit turns dynamic mode off. Warning, currently it is a bad idea to use several -d options with positive values on the same command line.
ends a deployment group.
filename is the name of a file that contains remote machines names (equivalent to several -m opions). In each line of this file, the first word is considered as a machine name and the remaining as comments.
sets the login name for the following hosts. This assumes that the connector command accepts -l option (this is the case for ssh, the default).
hostname is the name of a remote machine on which TakTuk has to be deployed. hostname might contain list of values specified inside brackets and exclusion lists (see "HOSTNAMES SPECIFICATION"). In such case, the depolyment will be performed on all the matching hosts. This option can be followed by any number of arguments enclosed between -[ and -] which will be transmitted as arguments of the remote TakTuk that will execute on all the target hosts.
propagates the TakTuk executable through the following connectors and thus eliminates the need for a TakTuk installation on remote machines.
cancels a preceding -s option.
filename is the name of a file that contains additional options for TakTuk. The parsing of the file is done when encountering this option.
same as -m hostname, except that the deployed node(s) are considered as forward-only nodes: they will not be numbered and will not be targeted by subsequent diffusion commands. As an exception, execution of TakTuk commands on those nodes is still possible by giving them as deployment arguments of the -G option.
command is the name of the command to use as a Perl interpreter when auto propagating or when using the taktuk_perl command.
changes the name of localhost as viewed by TakTuk.
gives to TakTuk a list of files to be sent upon successfull remote connection. Use with caution as it will slow down deployment (the files are transfered before the end of the deployment). The intended use is NOT to transfer application data files (rather use the put command to transfer such files). This option should be used to transfer files that are necessary to perform further connections from the remote node. files is a comma separated list of pairs local_file:remote_file. Regarding the transfer itself, it behaves as the put command.
command is the name of the TakTuk command (default is $0, the name used to launch TakTuk). This is the command used once connected to initiate the remote TakTuk engine. Note that the effect of this switch is void when using the -s option.
set the PATH environment variable to the given list (as usual, a colon separated directories list) on remote hosts to which TakTuk connects. This is performed very early and is taken into account even for taktuk or perl invocations at connection time.
replaces the default set of characters that separates successive TakTuk commands.
defines an escape character that can be used to protect any following character from TakTuk interpretation. This protection applies nearly to the whole TakTuk command line.
replaces the default set of characters that separates successive words when reading options and commands from a file (using the -F switch).
sets an output template specification for one of output streams designed by the given name. When giving only a stream name (without template) this disables the stream. Available streams include :
connector (errors from the connector command)this stream contains in $line information outputed to stderr by a connector command. Relevant fields include $host, $peer and others listed below.
error, output (error and output of remotely executed commands)these streams contain in $line information outputed by executed command to stdout or stderr (respectively). Relevant fields include $host, $command, $pid and others listed below.
info (general information such as help summary or version)this stream contains in $line information outputed by taktuk in response to commands such as help or version.
message (messages from running processes)each output of this stream contains in $line a message sent with target "output" (through TakTuk out-of-band communications facilities) by some processus started using TakTuk commands. Relevant fields for this stream include $from and $to and others listed below.
state (internal state of TakTuk instance)this stream contains in $line the state change code matching some TakTuk events. Codes are the following:
0 - TakTuk is ready
1 - TakTuk is numbered
2 - TakTuk terminated
3 - connection failed
4 - connection initialized
5 - connection lost
6 - command started
7 - command failed
8 - command terminated
9 - numbering update failed
10 - pipe input started
11 - pipe input failed
12 - pipe input terminated
13 - file reception started
14 - file reception failed
15 - file reception terminated
16 - file send failed
17 - Invalid target
18 - No target
19 - Message delivered
20 - Invalid destination
21 - Destination not available anymore
22 - Wait complete
23 - Wait reduce completeThe function event_msg($) can be used in the template to translate this code into a string that describes the event. Relevant fields include $host, $position, $rank, $count and others listed below.
status (commands exit status)this stream contains in $line the return code of executed commands. Relevant fields include $host, $pid and others listed below.
taktuk (internal messages, warnings and errors)this stream contains in $line error, warning and debug messages outputed by TakTuk itself. Relevant fields include $line_number, $package and others listed below.
a template is a Perl expression that should evaluate to the string eventually displayed. Within a specification, some variables might be used depending on the concerned stream:
$command (not for taktuk nor info)the command line execution that generated output.
$countthe total number of TakTuk instances.
$eolan empty string or a newline depending on what character ended command output.
$filename (taktuk only)the file in which a TakTuk diagnostic function has been called.
$from (message only)the logical number of the TakTuk instance from which the message has been sent.
$hostthe name of the host executing the current TakTuk instance
$init_date (connector and state only)the time in seconds since Jan. 1, 1970 at which the remote TakTuk instance completed its initialization (including ssh connection time and self propagation if any).
$level (taktuk only)the level of the diagnostic function called.
$level_name (taktuk only)the name associated with the level of the diagnostic function called.
$linethe raw data outputed by a command or passed to a diagnostic function, any trailing newline removed (see $eol).
$line_number (taktuk only)the line number at which a TakTuk diagnostic function has been called.
$package (taktuk only)the package in which a TakTuk diagnostic function has been called.
$peer (connector and state only)the remote machine for which a connector command outputed information.
$peer_position (connector and state only)position on the command line of the remote host. This position is expressed as a path in the hierarchy of hosts expressed on the command line (dot separated position number at each level of imbrication).
$peers_given (state only)a space separated list of remote nodes that has been given to the remote peer for deployment (whatever their deployment state). Each remote node is specified as a colon separated couple made of its hostname and its position on the command line. This variable has only a meaningful value when the event outputed to the stream state is a connection loss (event number 5).
$pid (not for taktuk nor info)the pid of the command line executed (that produced output).
$positionposition on the command line of the current host. This position is expressed as a path in the hierarchy of hosts expressed on the command line (dot separated position number at each level of imbrication).
$rankthe logical number of TakTuk instance in which output is collected.
$reply_date (connector and state only)the time in seconds since Jan. 1, 1970 at which the connector command replied to the local TakTuk instance (note that this does not include the initialization exange occuring before the remote TakTuk is considered as functional).
$start_date (output, error, connector and status)the time in seconds since Jan. 1, 1970 at which the command started (taken just after the call to fork()).
$init_date (connector and state only)the time in seconds since Jan. 1, 1970 at which the remote TakTuk completed its initilization.
$stop_date (connector and status only)the time in seconds since Jan. 1, 1970 at which the command terminated (after the closing of its stdout).
$to (message only)the logical number (or set of such numbers) of the TakTuk instance to which the message has been sent.
$typethe name of the output stream (connector, error, output, ...).
$user_scalara scalar, global to the package, initially initialized to undef, that the user is free to use for any purpose.
at the end of the day, the specification is evaluated for each line of the concerned stream and the result printed on the root node. Note that the newline has to be added explicitly as \n in the template if needed.
WARNING: take care of your specification, if the Perl syntax is not correct lots of awfull compilation error messages will be displayed and TakTuk execution will fail.
redirect a given stream output to a given file (located at the root node). Notice that the given filename comply with Perl open syntax: for instance, one might redirect to a file descriptor X using the name ">&=X". See -o option for more details about streams output.
caution: this feature should be considered as experimental and could be removed from future releases. Tunes finely the behavior of the work-stealing algorithm by setting some its parameters to Perl expressions. These Perl expressions can use the variables $last_given and $available which are respectively equal to the number of tasks given to a stealer last time it stole and to the total number of remaining deployment tasks. Available parameters are :
the number of tasks given to a remote TakTuk instance the first time it send a steal request to the local host.
the number of tasks given to a remote TakTuk instance each time it performs a steal to the local host after the first time.
an upper bound to the value resulting from the evaluation of growth.
sets to duration (in seconds) the maximal interval between timeouts checks (usually checks are made more often: at each message received a timeouts check is made).
disables TakTuk logical numbering and the variables TAKTUK_COUNT and TAKTUK_RANK are not defined in executed commands. This has the advantage of removing the global synchronization occuring at the end of the deployment and making the deployment more efficient.
WARNING: use this option only before any remote node specification (-m or -f) otherwise you might get serious synchronization issues in TakTuk. Using TakTuk point-to-point communication along with this option will fail and produce TakTuk warnings.
sets the timeout (in seconds) for following connectors (0 = no timeout). Notice that this option override the timeout of the connector command (ssh for instance). When the delay expires, the connector command is simply killed.
limits a number of memory bytes TakTuk might use as an internal write buffer. For most users, setting such a limit is a bad idea : in some rare situations it might result in a deadlock in TakTuk (caused by parallel blocking writes between an application and TakTuk itself). Setting this option to a negative value disables the limit (default).
Nevertheless, if you use TakTuk to transfer large files, because of I/O bandwith disparities in various parts of a system, TakTuk memory use might grow too large and performance can be severely degraded when the system starts swapping. In such situations, limiting the size of the internal cache will keep TakTuk in main memory and preserve the performance.
sets initial window to the given size (= pipeline width).
sets the windows adaptation scheme to number (default is 0, 0: no adaptation, 1: implementation in progress).
makes the next option local (not inherited). This means that the next option is set only for the local host and not propagated to children TakTuk instances. Has no effect if the next option is already a local one.
prints a short description of TakTuk on the screen.
forces TakTuk interactive mode even after some batch commands given on the command line.
prints the TakTuk version.
prints the defaults settings used by TakTuk (environment variables taken into account).
These option are not useful for most users. They are used either internally by TakTuk itself or for development purposes.
prints the content of package packagename extracted from the taktuk code in execution.
current TakTuk instance is not the root node. This is an internal switch used by spawned TakTuk instances. This is usually not useful for most users.
sets debugging level (1..4) for scope. The scope might be a TakTuk package name or default and the lowest the level the more verbose the output.
After the options parsing, TakTuk expects some commands either on the remaining of the command line (batch mode) or on the standard input (interactive mode). These commands are actions to be performed by TakTuk using the logical network infrastructure set up during the deployment. By default, commands might be separated by ; or newlines. For all the commands, any non ambiguous prefix can be used instead of their full name. In interactive mode, TakTuk has support for readline (history, command line editing) if installed on your system.
When TakTuk commands accept arguments, they should be enclosed into matching delimiters (indicated by * below). In other words, * might be replaced either by any non alphanumeric character or by a pair of matching braces, brackets or parenthesis. These delimiters must be separated from their content (using the options separator). If the argument contains a closing delimiter preceded by a separator, then it is probably a good idea to escape it (see -E option) or to protect the whole arguments string if given on the command line.
Taktuk understands the following commands:
Sends the execution of command to all the peers belonging to the given set. For more details about the set specification, see section "SET AND TARGETS SPECIFICATION".
Broadcasts the execution of command on all the remote peers (not including the node initiating the broadcast).
Spreads the execution of command on all the children of the node initiating the downcast (not including itself).
Executes the command line on the local machine. Inputs/outputs of the execution are multiplexed and fowarded to the TakTuk root. This command accepts optional parameters that enable the attachment of callbacks triggered by timeouts to the execution of the command. See section "EXEC PARAMETERS" for more details.
Copies (a) remote source(s) (present on the remote node(s)) to a destination on the node executing this command. The type of source and destination is quite similar to those accepted by the cp -r command (that is file or directories). This command also performs some kind of magic with its parameters: shell environment variables present in the source or destination names are replaced by their respective value on the remote and local nodes. In addition, the variables $host, $rank and $position of the remote node (which are the same as in -o option) can also be used in both names.
Prints a very concise TakTuk help.
Sends the given data as input to commands in execution on the local machine as specified by the given target. If no target is given, the data is sent to all commands. For more details about targets, see "SET AND TARGETS SPECIFICATION"
Closes the inputs descriptor of executing commands on the local machine as specified by the given target. If no target is given, the inputs of all commands are closed.
Sends the content of a file (which must be local to the node executing the input file) as input to commands in execution on the local machine as specified by the given target. If no target is given, the data is sent to all commands.
WARNING: this command is not atomic. If you manage somehow to initiate a input file command from two different TakTuk instances, data will probably be interleaved. In this case you should synchronize the two instances. This is not required when spreading files only from the root node.
Sends the given data with an additional newline as input to commands in execution on the local machine as specified by the given target. If no target is given, the data is sent to all commands.
Treat the parameter as a file (which must be local to the node executing the input pipe) which behavior is the same as a pipe: data can arrive continuously. TakTuk add it as one of its input channels and send data as input to commands when available. If given, the target specifies to which command the data are to be sent, otherwise it is sent to all commands.
Sends the given signal to local commands processes groups. If no signal is given, sends a TERM signal (signal 15). If given, the target specifies to which command the signal is to be sent, otherwise it is sent to all commands. For more details about targets, see "SET AND TARGETS SPECIFICATION"
Sends the given data as a message to commands in execution on the local machine as specified by the given target (see TakTuk(3) and taktukcomm(3) for more details about messages). If no target is given, the data is sent to the first command peforming a receive and not already targetted by another message. For more details about targets, see "SET AND TARGETS SPECIFICATION"
Sends the content of a file (which must be local to the node executing the message file) as a message to commands in execution on the local machine as specified by the given target (see TakTuk(3) and taktukcomm(3) for more details about messages). If no target is given, the data is sent to the first command peforming a receive and not already targetted by another message.
WARNING: this command is not atomic. If you manage somehow to initiate a message file command from two different TakTuk instances, data will probably be interleaved. In this case you should synchronize the two instances. This is not required when spreading files only from the root node.
Sends the given data with an additional newline as a message to commands in execution on the local machine as specified by the given target (see TakTuk(3) and taktukcomm(3) for more details about messages). If no target is given, the data is sent to the first command peforming a receive and not already targetted by another message.
Treat the parameter as a filename (which must be local to the node executing the input pipe) which behavior is the same as a pipe: data can arrive continuously. TakTuk add it as one of its input channels and send data as a message to commands when available (see TakTuk(3) and taktukcomm(3) for more details about messages). If given, the target specifies to which command the data are to be sent, otherwise it is sent to the first command peforming a receive and not already targetted by another message.
Prints the current TakTuk deployment tree. Numbers in parenthesis match the peer rank in the logical TakTuk numbering and the peer ready state. If the deployment is not complete, the printed tree will display connecting ... leaves.
Cancels all ongoing connections. Consequently, this causes immediate starting of the possible numbering of TakTuk instances and the execution of TakTuk commands.
Completely recomputes the logical numbering of TakTuk instances. This is especially useful when adding new nodes to the deployed network after initial numbering.
Updates the logical numbering of TakTuk instances without changing already existing numbers. Does not always succeed as TakTuk uses a depth first scheme for numbering. Sends an event 9 in the stream 'state' for each node of the tree that cannot be updated while keeping TakTuk numbering scheme. This is especially useful when adding new nodes to the deployed network after initial numbering.
Either changes a single option which name is given (first form) or parses an additional options line (second form) on the node(s) executing this command. See TakTuk options for more details, name can be either short or long in the first form.
WARNING: new nodes added to TakTuk network using this command are not numbered. Further use of network renumbering or update is necessary to get TakTuk logical numbering.
Copies a local source (present on the node executing this command) to a destination on all the remote nodes given as prefix of the command. The type of source and destination is quite similar to those accepted by the cp -r command (that is file or directories). This command also performs some kind of magic with its parameters: shell environment variables present in the source or destination names are replaced by their respective value on the local and remote nodes. In addition, the variables $host, $rank and $position of the local node (which are the same as in -o option) can also be used in both names.
Forces the given command to wait for the completion of deployment, nodes numbering and previous commands before executing. This is useful for global commands like broadcast which does not wait for nodes numbering. In contrary, multicast commands (those that use a set specification as a prefix) wait for the nodes numbering and the completion of previous commands. If in doubt, always use synchronize before a broadcast, downcast or wait reduce.
Forks a perl interpreter on the local node just as if the command exec perl arguments has been used. The difference is that this interpreter is previously fetched with the taktuk package that contains point-to-point communication routines (TakTuk::send and TakTuk::recv, see taktukcomm(3)). WARNING: due to the limitations of the parser that analyses the arguments of this command, you have to give arguments (even if empty) and to use '--' if you give any option to the perl interpreter (and even if you give it only options).
prints TakTuk version.
Quit the TakTuk engine and shut down the logical communication network established during the deployment.
Waits (suspends the execution of following commands) in the local TakTuk instance for the completion of some local process depending on the given target. This target might be any target specification except output. For more details about targets, see "SET AND TARGETS SPECIFICATION".
Can only be used in the root node. Waits (suspends the execution of following commands) for the completion of some processes in all the deployed TakTuk instances depending on the given target. This target might be any target specification except output. Notice that, contrary to simple wait commands, this command is synchronized the same way as broadcast. Thus, it should be explicitly synchronized if mixed with non broadcasted commands (otherwise it will be executed before them).
The TakTuk command exec accepts optional parameters. These parameters are used to specify a target id for the command, or to attach actions triggered by timeouts to commands execution. An exec command accepts any number of parameters. These parameters are interpreted from left to right using the following syntax:
Attach the (numerical) value as the target id of the executed command. This target id will be used by any subsequent command that make use of targets (such as input, message, kill or wait).
Caution: this value overwrite any target id that could have been automatically assigned by TakTuk. Therefore, it is not recommended to mix the use of explicitly assigned target ids with the use of automatically assigned target ids.
Creates a new timeout specification. At the end of the duration expressed by the given value, it will trigger its attached callbacks. If it has no attached callback, it will send a TERM signal to the command. If the command execution terminates before the end of the timeout duration, the timeout is canceled.
Attach a callback to the last defined timeout. This callback send a signal, which number is the given value, to the timeouted command.
Attach a callback to the last defined timeout. This callback executes the given TakTuk command. If it executes some other command, it can use the environment variable TAKTUK_PID that contains the pid of the timeouted command. The given TakTuk command can be any valid TakTuk command (without command separator).
Notice that each timeout can have any number of attached callbacks. They will be processed in the order they are given as parameters.
Some of TakTuk defaults settings can be changed on some host using environment variables. These settings are propagated as are other options. They are overridden by propagated settings and command line options.
To change some default setting use the variable TAKTUK_NAME where NAME is the name of the according long option in upper case and with dashes replaced by underscores. For option taking complex value (such as --debug) just add an underscore and the field you want to change in upper case at the end of the name. Using taktuk --print-defaults will give you examples of names used to change default settings. Note that defining in the environment a default setting not used by TakTuk has no effect.
You can also change some TakTuk default settings locally without propagating the change in the deployment tree. To do this, use the variable TAKTUK_MY_NAME where name is defined as above. As before, these local settings are overridden by propagated settings and command line options.
Taktuk sets the following environment variables for all the commands it executes :
File descriptors, used internally by TakTuk.
The total number of successfully deployed TakTuk instances
Local node hostname as given to TakTuk (on the command line)
List of pids (separated by spaces) of commands executed by the local TakTuk instance.
Target number of the currently executing process (see "SET AND TARGETS SPECIFICATION" for more details).
Host position on the command line.
The logical rank of the local instance.
The logical rank of the taktuk instance that spawned this one.
The logical rank of the lowest numbered descendent from the current taktuk instance (-1 if the local TakTuk instance has no children).
The logical rank of the highest numbered descendent from the current taktuk instance (-1 if the local TakTuk instance has no children).
Hostnames given to TakTuk might be simple machine name or complex hosts lists specifications. In its general form, an hostname is made of an host set and an optional exclusion set separated by a slash. Each of those sets is a comma separated list of host templates. Each of these templates is made of constant part (characters outside brackets) and optional range parts (characters inside brackets). Each range part is a comma separated list of intervals or single values. Each interval is made of two single values separated by a dash. This is true for all hostnames given to TakTuk (both with -m or -f options).
In other words, the following expressions are valid host specifications: node1 node[19] node[1-3] node[1-3],otherhost/node2 node[1-3,5]part[a-b]/node[3-5]parta,node1partb
they respectively expand to: node1 node19 node1 node2 node3 node1 node3 otherhost node1parta node2parta node2partb node3partb node5partb
Notice that these list of values are not regular expressions (node[19] is node19 and not node1, node2, ...., node9). Intervals are implemented using the perl magical auto increment feature, thus you can use alphanumeric values as interval bounds (see perl documentation, operator ++ for limitations of this auto increment).
The TakTuk command line and the TakTuk::send routine accept a set specification as destination host(s). A set specification is made of interval specifications separated by slashes. An interval specification is either made of a single number, two numbers separated by a dash or a single number followed by a plus symbol (this last case match the interval that goes from the number to the highest numbered TakTuk destination). Of course the two numbers specifying an interval must be given in increasing order.
The remote peers included in a set specification are all the peer which logical number belong to at least one interval of the set. Here are some exemples of set specifications :
1
the peer numbered 1
2-7
the peers numbered 2,3,4,5,6 and 7
2-4/1/10
the peers numbered 1,2,3,4 an 10
3+
the peers from 3 to the highest numbered
5+/1
the peers from 5 to the highest numbered and the peer 1The target number is a number assigned by TakTuk to all processes it executes (successfully started or not using exec or taktuk_perl commands). By default, this number starts from 0 and goes to the total number of processes that have been executed since TakTuk launch minus one. Target processes of a TakTuk::send or a TakTuk command can be expressed with the same syntax as in the case of sets.
Furthermore, TakTuk understands several special targets. The special target all targets all processes: this means that the command is applied to all executing local processes (message or input data are duplicated and sent to all of them), this is the default for the input and kill commands. The special target any targets the first eligible process. In the case of a message this is the first process that issues a TakTuk::recv and that is not already the target of another message, this is the default for the message command. Finally, the special target output targets the output stream message rather than a process.
The following examples illustrate the basic use of TakTuk on a few machines and the use of developper options. Notice that TakTuk is designed to scale to much more peers than the number involved in these examples.
the simplest way to use TakTuk is to make it selfpropagate with option -s. In this case, the basic remote execution of hostname on the host toto.nowhere.com can be written :
taktuk -s -m toto.nowhere.com broadcast exec [ hostname ]In this example, -s asks TakTuk to propagate its own code on remote hosts. It can be removed by installing the taktuk executable on toto.nowhere.com. By the following we will assume that TakTuk is installed on all the remote hosts.
The -m toto.nowhere.com describe the set of remote hosts to be contacted by TakTuk and broadcast exec [ hostname ] is a command that will be executed by the TakTuk interpreter.
This example can be written in many other ways. In interactive mode, the same execution might become:
taktuk -m toto.nowhere.comhere TakTuk is blocked waiting for commands from stdin. Thus, we just have to type:
broadcast exec { hostname }
Ctrl-Dhere you can notice that parameters to the exec TakTuk command (as all commands parameters) can be enclosed in any reasonable pair of delimiters. We might also write the list of hosts involved in the command in a file machine that contains:
toto.nowhere.comand the TakTuk command becomes:
taktuk -f machine broadcast exec - hostname -We could also use another file options that contains:
-f machine and use it as the options line given to TakTuk:
taktuk -F options broadcast exec \( hostname \)Finally, everything could be stored in a last file command_line that contains:
-f machine broadcast exec = hostname =and the following command achieve the same result:
taktuk -F command_lineAll of these variants have the same effect: they execute hostname on toto.nowhere.com and the output of the program is forwarded to the localhost. In this case:
toto.nowhere.com: hostname: somepid: output > toto.nowhere.comnotice that braces for command parameters must be separated from their content. Thus, they can contain other braces as long as no single closing brace is part of the content:
taktuk -m localhost broadcast exec [ 'if [ $RANDOM -gt 10000 ];then echo greater;else echo lower;fi' ]In this example, quotes are necessary to prevent the shell from interpreting the $ and ; characters and to prevent the closing brace for if toe be considered as closing the exec command. In this case the variable will be interpolated only on remote hosts. This same example can also be expressed using shortcuts and intercative mode:
taktuk -m localhost -E%then type:
b e [ if [ $RANDOM -gt 10000 %];then echo greater;else echo lower;fi ]
Ctrl-DNotice the closing bracket used in the test that should not be interpreted as the closing bracket for exec arguments. In such case, a simpler solution is probably to use another kind of braces
taktuk -m localhostand then: b e { if [ $RANDOM -gt 10000 ];then echo greater;else echo lower;fi } Ctrl-D
Usually, if you want to be safe, you can quote all commands parameters. Nevertheless, notice that parameters should not be quoted in interactive mode as input lines are not interpreted by the shell.
commands executed by TakTuk can be timeouted using exec parameters. For instance if you want to execute some command and send it a TERM signal after two seconds, just type:
taktuk -m localhost broadcast exec timeout 2 [ sleep 10 ]the callback executed when a timeout occurs can also be something else than a TERM signal. This can be another signal (KILL for instance):
taktuk -m localhost broadcast exec timeout 2 kill 9 [ sleep 10 ]or any valid TakTuk command:
taktuk -m localhost broadcast exec timeout 2 action broadcast exec [ echo hello ] [ sleep 10 ]or even several timeouts and several callbacks:
taktuk -m localhost b e t 2 a e [ echo hello ] k 30 t 10 k 9 [ sleep 5 ]in this last example, the command sleep 5 is executed by TakTuk. After 2 seconds, the first timeout will be triggered, it will execute the command echo hello and send a USR1 signal to the first command (sleep 5). The second timeout is set to 10 seconds. Thus, it will never occur as the sleep 5 command will be terminated before its expiration.
Usually, TakTuk deploys itself using a relatively flat tree because its default window size is quite large (10 simultaneous ongoing connections). Using a smaller window size will result in a deeper tree although it also depends on the local load of the deployment nodes. You can use the TakTuk network state command to print the tree constructed by TakTuk.
Notice that it is usually a bad idea to use a too large window as it results in too much local load and bad distribution of work (something like 10 is often sufficient).
You can also force TakTuk to use more specific topologies. For instance, to execute echo $$ using a flat-tree as deployment topology, just disable work-stealing in TakTuk:
taktuk -d -1 -m host1 -m host2 -m host3 broadcast exec [ 'echo $$' ]and to use a chain-like topology, either encode the topology in arguments structure:
taktuk -m host1 -[ -m host2 -[ -m host3 -] -] broadcast exec [ 'echo $$' ]or limits the arity of the dynamic tree to 1:
taktuk -d 1 -m host1 -m host2 -m host3 broadcast exec [ 'echo $$' ]Finally, the default will use a dynamicly constructed topology:
taktuk -d 0 -m host1 -m host2 -m host3 broadcast exec [ 'echo $$' ]On a lightweight grid, because of locality issues (ldap cache, network topology, ...) it seems interesting to separate the deployment of each subcluster. To do this, it is possible to enclose the nodes of each cluster into a separate deployment group:
taktuk -b -m node1.cluster1 -m node2.cluster1 -m node3.cluster1 -m node4.cluster1 -e -b -m node1.cluster2 -m node2.cluster2 -m node3.cluster2 -m node4.cluster2 -e broadcast exec [ hostname ]This command has the effect of deploying TakTuk on two clusters (cluster 1 and 2) made of four nodes (node 1 to 4), preventing deployed nodes from one cluster to be used to deploy nodes from the other cluster. Finally, once the deployment is complete, it executes the command hostname on all these nodes.
each distinct host can be given its own command using arguments:
./taktuk -m host1 -[ exec [ hostname ] -] -m host2 -[ exec [ id ] -] -m host3 -[ exec [ 'echo $TAKTUK_RANK; ls' ] -] quitbut this could also be given using set specification (in this case logical number are used for hosts):
./taktuk -m host1 -m host3 -m host8 1 exec [ hostname ], 2 exec [ id ], 3 exec [ 'echo $TAKTUK_RANK; ls' ]or in interactive mode:
./taktuk -m host1 -m host3 -m host8
1 exec [ hostname ]
2 exec [ id ]
3 exec [ echo $TAKTUK_RANK; ls ]
Ctrl-DNevertheless keep in mind that in general these logical numbers do not match the position of hosts on the command line.
spreading and executing a perl script named essai.pl on three hosts, knowing that taktuk and essai.pl are only present on the root node is straightforward with TakTuk:
taktuk -s -m host1 -m host2 -m host3
broadcast exec [ perl -- - ]
broadcast input file [ essai.pl ]
broadcast input close
Ctrl-Dsince version 3.4, files transfer is supported directly by TakTuk. Notice that this transfer uses the TakTuk network (usually a tree composed of ssh connections by default). This network is not efficient for the tranfer of large files (both topologically and from a protocol point of view), so keep this in mind when using this feature.
copying a file named message.txt to the /tmp directory of each remote host is thus as easy as:
taktuk -s -m host1 -m host2 -m host3
broadcast put [ message.txt ] [ /tmp ]
Ctrl-Dbut the older method still works (and does almost the same as the previous command):
taktuk -s -m host1 -m host2 -m host3
broadcast exec [ cat - >/tmp/message.txt ]
broadcast input file [ message.txt ]
broadcast input close
Ctrl-Dalthough it requires to be more careful about shell interpretation when typing everything directly on the command line:
taktuk -s -m host1 -m host2 -m host3 broadcast exec [ 'cat - >/tmp/message.txt' ]\;broadcast input file [ message.txt ]notice in this latter command that the input close is not necessary as TakTuk closes inputs of all spawned commands when quitting.
the get command also makes possible things that were previously very difficult in TakTuk, files collecting. The following command gets the file /tmp/message.txt from each remote host and copies it locally to message-number.txt where number is the logical rank of the source node:
taktuk -s -m host1 -m host2 -m host3
broadcast get [ /tmp/message.txt ] [ message-$rank.txt ]
Ctrl-Dfinally, it seems important to mention that put/get commands can copy directories and keep files permissions unchanged.
TakTuk can also be used to establish a point-to-point communication. Assume the file communication.pl contains the following Perl script:
my $rank = TakTuk::get('rank');
my $count = TakTuk::get('count');
if ($rank == 1)
{
print "I'm process 1\n";
if ($count > 1)
{
TakTuk::send(to=>2, body=>"Hello world");
}
}
elsif ($rank == 2)
{
print "I'm process 2\n";
my ($from, $message) = TakTuk::recv();
print "Process $to received $message from $from\n";
}then the execution of the following command:
taktuk -m localhost -m localhost broadcast taktuk_perl [ - ]\;broadcast input file [ communication.pl ]would produce an output similar to:
Astaroth.local: taktuk_perl: 3523: output > I'm process 2
Astaroth.local: taktuk_perl: 3523: output > Process 2 received Hello world from 1
Astaroth.local: taktuk_perl: 3523: status > 0
Astaroth.local: taktuk_perl: 3524: output > I'm process 1
Astaroth.local: taktuk_perl: 3524: status > 0if the file communication.pl was placed in the login directory of the user, this could have also been executed by the more simple:
taktuk -m localhost -m localhost broadcast taktuk_perl [ communication.pl ]TakTuk is also capable of making each site echo its rank without command status information:
taktuk -o status -m host1 -m host2 broadcast exec [ 'echo $TAKTUK_RANK' ]or removing the prompt before each line of output from commands:
taktuk -o output='"$line\n"' -m host1 -m host2 broadcast exec [ 'echo $TAKTUK_RANK' ]or even changing the prompt to make it display only the stream type:
taktuk -o default='"$type > $line\n"' -m host1 -m host2 broadcast exec [ 'echo $TAKTUK_RANK' ]and it also possible to redirect the status to file descriptor 2 only for the second host:
taktuk -m host1 -R status=2 -m host2 broadcast exec [ 'echo $TAKTUK_RANK' ]and so on...
debugging in TakTuk is made using debug, warning and error functions of the package diagnostic. These routines, depending on the debugging level of the package in which they are called, produce an output that is propagated up to the root node and printed on screen.
By default the debugging level of packages is set to 2 (everything is printed out except debug messages). It might be changed for each package using the -D option. For instance the following code executes true on toto.nowhere.com and prints out every bit of internal messaging:
taktuk -D default=1 -m toto.nowhere.com broadcast exec [ true ]but one could have executed the same command keeping only messages from the scheduler package:
taktuk -D scheduler=1 -m toto.nowhere.com broadcast exec [ true ]or ensuring an execution exempted of any warning or error messages:
taktuk -D default=4 -m toto.nowhere.com broadcast exec [ true ]the internal message server used in TakTuk for the management of logical network construction, commands execution and I/O forwarding can be exposed using the -r option:
taktuk -rNotice that in this mode the behavior of TakTuk can seem very cryptic. This is not intended for ordinary users.
The development of TakTuk is still in progress, so there are propably numbers of bugs. For now, the following characteristics (some of them are not really bugs) have been identified :
currently TakTuk do not quit (even if asked to do so) if some local commands do not terminate upon the closing of their standard input. Interrupting TakTuk actually terminate the engine but do not kill these commands. We still have to decide if this is the appropriate behavior.
broadcasts and multicast (set specifications) are not synchronized the same way in TakTuk. Thus, broadcast commands given after multicast commands might be executed before these last ones. Use the synchronize command to avoid this.
this is not really a bug : when a machine is highly loaded, fork may fail. If this happen to a local command, a distributed application may deadlock, because the taktuk instances numbering is correct but some instance didn't fork the local command. The simplest fix is to use timeouts on TakTuk::recv().
You might also want to have a look at:
http://taktuk.gforge.inria.fr/Bugs.txtwhere all the temporary bugs are listed version by version.
taktukcomm(3), TakTuk(3), TakTuk::Pilot(3)
The original concept of TakTuk has been proposed by Cyrille Martin in his PhD thesis. People involved in this work include Jacques Briat, Olivier Richard, Thierry Gautier and Guillaume Huard.
The author of the version 3 (perl version) and current maintainer of the package is Guillaume Huard.
TakTuk is provided under the terms of the GNU General Public License version 2 or later.