Nieuwe netwerkinterface instellen (LAN, ISDN, ADSL, ...)

drakconnect

Introductie

Met deze tool[20] kunt u veel instellen voor uw lokale netwerk- of internettoegang. U dient sommige gegevens te weten van uw internetprovider of uw netwerkbeheerder.

Kies het verbindingstype dat u in wilt stellen, afhankelijk van de hardware en de provider die u heeft.

Een nieuwe bekabelde verbinding (Ethernet)

  1. Het eerste venster laat de interfaces zien die beschikbaar zijn. Kies welke ingesteld moet worden.

  2. Hier wordt de keuze gegeven tussen zelf, handmatig, een IP-adres invoeren, of er automatisch een toegewezen krijgen.

  3. Automatisch IP

    1. Ethernet/IP-instellingen: kies hier of de DNS-servers van de DHCP-server opgehaald worden, of handmatig ingesteld, zoals hieronder uitgelegd wordt. In het laatste geval dienen de IP-adressen van de the DNS-servers ingevoerd te worden. De HOSTNAAM van de computer kan ook ingesteld worden. Wordt dit niet gedaan, dan wordt standaard de naam localhost.localdomain gebruikt. De Hostnaam kan ook door de DHCP-server ingesteld worden met de optie Hostnaam laten toekennen door DHCP-server. Niet alle DHCP-servers hebben deze functie, een ADSL-router voor thuisgebruik kan dit waarschijnlijk niet.

    2. De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren:

      • Zoekdomein (inactief indien door de DHCP-server geleverd)

      • de DHCP-client

      • DHCP-wachttijd

      • YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-server

      • NTPD-servers van DHCP ophalen (klokkensynchronisatie)

      • DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers.

    3. Klik op 'Volgende' om verder te gaan. De volgende stappen zijn gelijk voor alle netwerkinterfaces en worden hier uitgelegd: de paragraaf “De configuratie beëindigen”

  4. Handmatige configuratie

    1. Ethernet/IP-instellingen: kies welke DNS-servers te gebruiken. De HOSTNAAM van de computer kan ook ingesteld worden. Wordt dit niet gedaan, dan wordt standaard de naam localhost.localdomain gebruikt.

      For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website.

      Bij de Geavanceerde installingen, kunt u een Zoekdomein invoeren. Dat is gewoonlijk uw thuisdomein, bv. als uw computer "splash" heet en de volledige naam "splash.boatanchor.net", dan is het Zoekdomein "boatanchor.net". Het is prima dit veld leeg te laten, tenzij u weet dat u het nodig heeft. ADSL thuis heeft deze instelling zelden nodig.

    2. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe Satellietverbinding (DVB)

Dit deel werd nog niet geschreven door gebrek aan middelen. Als u denkt dat u dit deel kan schrijven, contacteer dan a.u.b. het Documentatieteam. Bij voorbaat dank.

Een nieuwe Kabelmodemverbinding

  1. Het eerste venster laat de interfaces zien die beschikbaar zijn. Kies welke ingesteld moet worden.

  2. Hier wordt de keuze gegeven tussen zelf, handmatig, een IP-adres invoeren, of er automatisch een toegewezen krijgen.

  3. U dient een authenticatiemethode in te stellen:

    • Geen

    • BPALogin gebruiken (nodig voor Telstra). Zonodig hier uw gebruikersnaam en wachtwoord invoeren.

  4. Automatisch IP

    1. Kabel/IP-instellingen: stel hier in of de DNS servers van de DHCP-server opgehaald worden, of handmatig ingesteld, zoals hieronder uitgelegd wordt. In het laatste geval dienen de IP-adressen van de the DNS-servers ingevoerd te worden. De HOSTNAAM van de computer kan ook ingesteld worden. Wordt dit niet gedaan, dan wordt standaard de naam localhost.localdomain gebruikt. De Hostnaam kan ook door de DHCP-server ingesteld worden met de optie Hostnaam laten toekennen door DHCP-server. Niet alle DHCP-servers hebben deze functie, een ADSL-router voor thuisgebruik kan dit waarschijnlijk niet.

    2. De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren:

      • Zoekdomein (inactief indien door de DHCP-server geleverd)

      • de DHCP-client

      • DHCP-wachttijd

      • YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-server

      • NTPD-servers van DHCP ophalen (klokkensynchronisatie)

      • DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers.

    3. Klik op 'Volgende' om verder te gaan. De volgende stappen zijn gelijk voor alle netwerkinterfaces en worden hier uitgelegd: de paragraaf “De configuratie beëindigen”

  5. Handmatige configuratie

    1. Kabel/IP-instellingen: u moet DNS-servers kiezen om te gebruiken. De HOSTNAAM van de computer kan ook ingesteld worden. Wordt dit niet gedaan, dan wordt standaard de naam localhost.localdomain gebruikt.

      For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website.

      In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic connection would not need this setting.

    2. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe DSL-verbinding

  1. If the tool detects network interfaces, it offers to select one and to configure it.

  2. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave.

  3. Kies een van de beschikbare protocollen:

    • Dynamic Host Configuration Protocol (DHCP)

    • Handmatige TCP/IP-configuratie

    • PPP over ADSL (PPPoA)

    • PPP over Ethernet (PPPoE)

    • Point to Point Tunneling Protocol (PPTP)

  4. Toegangsinstellingen

    • Account-aanmelding (gebruikersnaam)

    • Account password

    • (Advanced) Virtual Path ID (VPI)

    • (Advanced) Virtual Circuit ID (VCI)

  5. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe ISDN-verbinding

  1. The wizard asks which device to configure:

    • Manual choice (internal ISDN card)

    • Extern ISDN modem

  2. A list of hardware is proposed, classified by category and manufacturer. Select your card.

  3. Kies een van de beschikbare protocollen:

    • Protocol for the rest of the world, except Europe (DHCP)

    • Protocol for Europe (EDSS1)

  4. A list of providers is then offered, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave you. Then it is asked for parameters:

    • Verbindingsnaam

    • Telefoonnummer

    • Aanmeldingsnaam

    • Account password

    • Aanmeldingscontrole-methode

  5. After that, you have to select if you get the IP address by automatic or manual method. In the last case, specify IP address and Subnet mask.

  6. The next step is to choose how DNS servers address are obtained, by automatic or manual method. In the case of manual configuration, you have to put:

    • Domeinnaam

    • Eerste en tweede DNS-server

    • Select if the hostname is set from IP. This option is to select only if you are sure that your provider is configured to accept it.

  7. The next step is to choose how the gateway address is obtained, by automatic or manual method. In the case of manual configuration, you have to enter the IP address.

  8. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe Draadloze verbinding (Wi-Fi)

  1. A first window lists the interfaces which are available and an entry for Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper only if the other configuration methods did not work.

  2. Hier wordt de keuze gegeven tussen de verschillende toegangspunten die de kaart ontdekt heeft.

  3. Specific parameter for the wireless card are to provide:

    • Operating mode:

      Beheerd

      To access to an existing access point (the most frequent).

      Ad-Hoc

      To configure direct connection between computers.

    • Netwerknaam (ESSID)

    • Encryption mode: it depends of how the access point is configured.

      WPA/WPA2

      This encryption mode is to prefer if your hardware allows it.

      WEP

      Some old hardware deals only this encryption method.

    • Vercijferingssleutel

      It is generally provided with the hardware which give the access point.

  4. Hier kunt u kiezen tussen automatisch een IP-adres krijgen, of dat handmatig instellen.

  5. Automatisch IP

    1. IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server

    2. De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren:

      • Zoekdomein (inactief indien door de DHCP-server geleverd)

      • de DHCP-client

      • DHCP-wachttijd

      • YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-servers

      • NTPD-servers van DHCP ophalen (klokkensynchronisatie)

      • DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers.

    3. After accepting the configuration the step, which is common to all connection configurations, is explained: de paragraaf “De configuratie beëindigen”

  6. Handmatige configuratie

    1. IP settings: you have to declare DNS servers. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default.

      For a residential network, the IP address always looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your providers website.

      In advanced settings, you can specified a Search domain. It must seem to your hostname without the first name, before the period.

    2. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe GPRS/Edge/3G-verbinding

  1. If the tool detects wireless interfaces, it offers to select one and to configure it.

  2. The PIN is asked. Leave empty if the PIN is not required.

  3. The wizard asks for network. If it is not detected, select the option Unlisted.

  4. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave.

  5. Provide access settings

    • Naam toegangspunt

    • Account-aanmelding (gebruikersnaam)

    • Account password

  6. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

Een nieuwe Bluetooth-inbelnetwerkverbinding

Dit deel werd nog niet geschreven door gebrek aan middelen. Als u denkt dat u dit deel kan schrijven, contacteer dan a.u.b. het Documentatieteam. Bij voorbaat dank.

Een nieuwe Analoog-telefoonmodemverbinding (POTS)

  1. The wizard asks which device to configure:

    • Handmatige keuze

    • Gevonden hardware, indien van toepassing.

  2. A list of ports is proposed. Select your port.

  3. Indien dat nog niet gebeurd is, zal voorgesteld worden dat u het pakket kppp-provider installeert.

  4. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Then it is asked for Dialup options:

    • Verbindingsnaam

    • Telefoonnummer

    • Aanmeldingsnaam

    • Wachtwoord

    • Aanmeldingscontrole, kies tussen:

      • PAP/CHAP

      • Script-gebaseerd

      • PAP

      • Gebaseerd op een terminal

      • CHAP

  5. De volgende stappen vindt u in de paragraaf “De configuratie beëindigen”

De configuratie beëindigen

In de volgende stap kunt u instellen:

  • Gebruikers toestaan de verbinding te beheren

  • De verbinding bij het opstarten maken

  • Schakel 'traffic-accounting' in

  • Sta toe dat deze interface door Network Manager beheerd wordt

  • In the case of a wireless connection, a supplemental box is Allow access point roaming which give the possibility to switch automatically between access point according to the signal strength.

Met de 'Geavanceerd'-knop kunt u instellen:

  • Metrisch

  • MTU

  • "Hot"-aansluiten van netwerk

  • Schakel IPv6 naar IPv4 tunnel in

De laatste stap laat u instellen of de verbinding meteen moet starten, of niet.



[20] U kunt deze tool op de commandoregel starten, door als root drakconnect te typen.


CC BY-SA 3.0
loading table of contents...